27 Best Freelance PCB Designers For Hire In April 2024 - Upwork™
Upwork home
Sign up
Secondary

Hire the best PCB designers

Check out PCB designers with the skills you need for your next job.
Hire freelancers
Clients rate PCB designers
Rating is 4.7 out of 5.
4.7/5
based on 2,855 client reviews
  • $40 hourly

    • 5.0/5
    • (51 jobs)
    Expert level electrical and some mechanical/industrial design engineer with 25+ years of experience in the electronic systems hardware development. 3D design of electronic housing. Design from concept to mass production, prototyping and manufacturing. -Electronic circuit and PCB design including multilayer, high-speed, HDI, BGA, -Generation of full manufacturing packages including Gerber files, -Design and development of analog and digital systems, -Laboratory measurement and testing -Troubleshooting and repairing of equipment remotely -Consulting and online support -3D hardware design of enclosure and stack PCB assemblies using SolidWorks -Digital and analog wireless RF, impedance matching, microstrips, EMI, EMC -Antenna design including PCB antennas, feeders -Low power & battery operated devices, fast charging, Solar and other energy harvesting -Motor control -Optic -3D printing, milling and lathe service. I am experienced in: Altiun Designer SolidWorks Protel, PCAD STM32CubeMX Keil, IAR, True Studio, CooCox, AVRStudio SolidCAM, Power Mill ADSimPLL MicroWave Office MicroCap Programming languages: C, ASM Standards and technologies: UART, SPI, I2C, USB, RS232, RS485, BT.656 OLED, LCD, TFT, BLE, MIMS, GPS, RFID Extremely low power design, DC-DC converters, solar cell energy harvesting Lithium battery safe and charging, fast charging Low temperature battery powering
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Electronics
    RF Design
    Altium Designer
    Analog Electronics
    RFID
    Digital Electronics
    Arduino
    Electrical Engineering
    Circuit Design
    SolidWorks
    Hardware Prototyping
    Electronic Design
  • $70 hourly

    • 4.9/5
    • (66 jobs)
    Highly creative and experienced product designer. Medical devices, consumer products, and military/avionics. Specialize in battery operated embedded systems that include sensors, displays, wireless, and human interfaces. Expertise in rf design, analog, signal conditioning, power supplies, battery management and wireless. Proficient in schematic and pcb design. Can work with your ME or ID to create a design that fits the desired form. My years of consulting experience lead to accurate project estimates and on time delivery of a functional design.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Digital Electronics
    Core Bluetooth
    Analog Electronics
    Antenna Design
    Embedded C
    Embedded System
  • $110 hourly

    • 5.0/5
    • (71 jobs)
    I’m a native English speaker. I’ve been working with electronics and developing products for over 25 years. Much of my electronics experience came from working at Microchip (in many different engineering roles). I’ve also developed my own successful products. For the past three years, I’ve been helping others develop their products on upwork. I’m going to help you make a working product, and I’m going to make improvements through the process! I don’t make the above claim lightly. It’s been my experience on every upwork project I’ve had. I work well with others, and can help motivate teams. Through all the product development I’ve done, I’ve created a system for planning and designing working products. This system reduces costs (by reducing mistakes). I frequently make product improvements in: (1) lowering energy usage: important in battery-powered products. (2) increasing performance: increasing sample rates or changing communications protocols. (3) making full use of the microcontroller peripherals to reduce external components. I have experience with many leading-edge technologies, such as: USB/USB-C, Lithium battery charging, LED’s and color mixing, I2S digital audio, analog measurements. I’ve worked with all the common communication busses: USB, RS-232, RS-485, CAN, I2C, SPI, Infrared (with carrier). Work experience Microchip was my first employer after graduating from Arizona State University. I’ve worked at Microchip as a: Test engineer - developing comprehensive test programs to ensure that the chips are free of defects and working as they should. The test programs were all written in assembly. Design engineer - Designing the processor and peripherals. Through this experience, I have a deep knowledge of how processors work (interrupts, clocking, power consumption, and interfacing with peripherals). All validation code was written in assembly language. Silicon validation engineer - Verifying that the first samples of a new product meet the design specification. This was typically assembly language, but sometimes ‘C’ Applications engineer - writing ‘C’ code to help other engineers make use of new features, such as RGB color mixing, IR remote controls, motion sensing, and wireless communication. I’ve worked as an independent developer, developing my own successful products in the areas of computer security and energy-saving pool products. I’ve been working for over 3 years on upwork as an independent developer. I enjoy taking people’s ideas and performance requirements and turning that into a working system. I begin with a block diagram, then schematic, then layout. I also organize the project so that it will be easy to switch to production. I’ve completed over 60 jobs on upwork successfully, and have many great working relationships with my clients. It’s too much to list here, but you are welcome to explore my work history. If you’ve gotten this far in the document, you can see that I’ve been working with electronics (primarily microcontrollers) for the past 25 years. I can do both the hardware and software development. I can also break up the project where I do what services you need. For example, I could do the architecture and hardware design, and you could have someone else do the software. I like to be flexible with my clients and deliver the most value where I can. Building first prototypes I have a small home laboratory where I have all the tools I need to develop/debug prototype boards for your product. This includes: Multiple programmers for Microchip, Atmel, and TI parts. Logic analyzers to quickly find issues with communication busses such as I2C, SPI, UART, I2S, …. A “power profiler” with picoAmp range (yes, picoAmp, a trillionth of an Ampere) for power optimization of low-power products. A reflow oven for assembling prototype PCB’s. Inspection equipment for verifying PCB assembly. A fellow upwork contractor is available to do the physical assembly work. She works at a much lower rate than me, and has the patience to hand-populate/hand-solder prototype boards. Some electronic inventory is on-hand. We may have all the components in-house to complete your project. Intellectual property protection I’m a professional engineer, and I respect your intellectual property rights. I want to help you protect the intellectual property rights for your product, and also help prevent others from stealing the idea. I mentioned ‘trust’ up above, and this is an area where I can earn your trust by helping protect your product. This could be through patents, trademarks, protected code, …. This is one of the ways that I offer additional value to my clients. If you’re developing a product, I invite you to have an audio call with me (through zoom on upwork). The first call is free, and we can see if I can help you reach your goals in some way.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Microcontroller Programming
    Software Architecture & Design
    MSP430
    Microcontroller Design
    Embedded System
    USB Electronics
    Hardware Prototyping
    PIC16
    Circuit Design
    C
    Assembly Language
    Electrical Engineering
  • $50 hourly

    • 5.0/5
    • (8 jobs)
    I am an Electronics, Robotics, and Automation Engineer, with over five years of experience gained through various challenging projects. Most of them involved working in different project phases, from problem definition to the building of high fidelity prototypes and final products. Skills and experience in following areas ➜ Electronic Product Hardware Development - From initial idea to final product ✔ ➜ Components Selection, Schematic Design, and PCB Layout ✔ ➜ Hardware Debugging, Assembling, Verification and Testing ✔ ➜ Software and Firmware Developing ✔ ➜ Project time and cost planning ✔ ➜ Interfaces and peripherals: DDRx, PCI Express, Gb Ethernet, SATA, PCI, GSM, GPS, HDMI, USB, SATA, LVDS, RGB, JTAG, CAN, Wi-Fi, BLE, SPI, I2C ✔ My office is equipped with: 3D printer, oscilloscope, motors, sensors, power supply device, electronic components, and many other hand tools. Accordingly, I am able to present preliminary solutions to my clients on short notice.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Electronic Circuit Design
    Altium Designer
    Design for Manufacturing
    Hardware Design
    Automotive Design
    Research & Development
    Multilayer PCB
    Embedded System
    Embedded C
    Digital Electronics
    Internet of Things
    Firmware Programming
    Electrical Engineering
  • $108 hourly

    • 4.5/5
    • (148 jobs)
    Thank you for taking the time to view my profile. I am an electrical engineer with a background in hardware design and software development. I specialize in circuit design, PCB fabrication, and embedded systems programming. I also provide enterprise software engineering and web development services with a focus on control systems engineering. I also specialize in digital signal processing and machine learning for data, image, and audio processing. I'm happy to help you take your idea to the next level and beyond! I consider myself an engineer, inventor, designer, and artist. I love to find solutions to complex problems, invent new things, and test what is possible! Services: -Application development -Circuit design and PCB layout -Embedded systems programming -Unity Development -Web development -Database engineering -Project management -Technical writing -Master builder :)
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Unity
    Electronic Design
    Article Writing
    OpenCV
    C#
    Power Electronics
    SQL
    Machine Learning
    Technical Writing
    RF Design
    Python
    C++
    nRF52
    Bluetooth
  • $80 hourly

    • 4.8/5
    • (100 jobs)
    18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regret it! What to expect: ✅Top quality design that not only meets and exceeds your requirements but can also handle those unexpected conditions that make quality products stand out from the rest. ✅Rigorous design test and measurement that leaves nothing unchecked, keeping in mind not only your interests but also those of your end customers. ✅A design that is optimized and ready for manufacturing with parts readily available. ✅Exhaustive documentation and support so you can make best use of all deliverables. ✅A flexible service that can take care of all phases in the design and prototyping process or just those parts that you prefer. ✅Long-term availability for changes, revisions, and support. ✅Above all, an honest and friendly collaboration that you can trust. I invite you to reach out to discuss your project's unique needs. Regardless of your technical background, I am here to transform your product idea into a tangible reality, employing the most efficient and cutting-edge technology. My services extend beyond design, offering assistance in defining complete project requirements, recommending suitable technology, and guiding your product to production. I can also connect you with reliable suppliers and provide unwavering technical support throughout the entire process. As a full-time freelance engineer, having worked with clients from all over the world in very diverse applications, I’ve been able to gain a broad experience in electronic design. The designs I’ve produced over the years range from the simplest of designs to very complex high-density designs at the cutting edge of technology. I have gained experience with a variety of microcontrollers, processors, sensors, interfaces, protocols, and design architectures. I’ve also been able to utilize a variety to PCB technologies ranging from multilayer rigid, HDI, flexible, rigid-flex, metal-core, as well as exotic materials such as stretchable PCB. Throughout the years I’ve also invested significantly in a spacious lab and equipment for both prototyping (including pick-and-place, reflow oven and advanced JBC soldering equipment) as well as professional test and measurement equipment (including oscilloscopes, spectrum analyzers, VNA, bench meters, electronic loads, waveform generators, ECG simulator, thermographic imaging, and data loggers), all from reputable brands (Keysight, Teledyne-Lecroy, FLIR, Fluke, Tektronix, Pico,…). My vision is to produce top quality designs with a ‘whatever it takes’ attitude and am willing to invest effort and financially in ensuring that I am well equipped to do so. Some of the specific experiences include: Software tools: Altium Designer (my primary EDA), KiCad, Eagle, Proteus; SolidWorks; Ansys, Keysight-ADS, COMSOL; VS Code, Visual Studio, PyCharm, IntelliJ; Keil MDK Arm, GCC, IAR, CodeComposer, Microchip Studio; Quartus Prime, Xilinx ISE; Programming languages: Embedded C, C++, C#, Python, Rust, Java, VHDL, Bash scripts, PHP, javascript… Microcontrollers/SoC: STM32 (often preferred), ATSAM, STM8, nRF5x (often preferred for BLE applications), EPS32, CH32 (RISCV), C2000, CC2642, CC13xx, PIC16/18, AVR, MPS430, RP2040, i.MX, A20/50, RK35xx, MAX78000, … Protocols/Buses: RS485/422, USB, UART, SPI, I2C, CAN, LVDS, DDR; Modbus, NMEA2000, MQTT, … Common design features: - BLE / Wi-Fi with custom PCB trace antenna, fully simulated and tuned on prototypes. - USB charge circuit for Li-Ion battery, including fast charging. - Battery protection circuits and cell balancing. - PoE source/device/injector designs with necessary protocol handshakes. - ARM embedded processor design running embedded Linux system. - RTD measurement circuits, 3/4 wire, 24 bit, PGA and filtering. - ECG, EOG, EEG monitoring wearable designs. - IMU motion tracking with sensor fusion and quaternion streaming. - GNSS location tracking, including high precision RTK modes. - Audio capture, filtering, processing, and amplification. - DC/DC converters in various topologies including buck, boost, buck-boost, SEPIC, CUK, H-Bridge, cascaded, multi-phase. AC/DC converters (flyback, feed-forward, …). DC/AC inverters, BLDC control… - LED driving with attention to color rendering and thermal management. - Solar MPPT controller. - UHF long range wireless designs, LoRa, Sigfox. Cellular interfaces 4G, LTE, NBIoT, LTEM. My commitment to excellence, innovation, and collaboration has been the cornerstone of my career. I look forward to the opportunity to bring your vision to life, leveraging my extensive skill set and passion for electronic design. Feel free to contact me to embark on a successful journey together.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Electronic Design
    Embedded System
    Circuit Design
    Digital Electronics
    Analog Electronics
    Hardware Prototyping
    Electrical Engineering
    Firmware
    Embedded C
    Embedded Linux
    Hardware Design
    Altium Designer
    Internet of Things Solutions Design
  • $120 hourly

    • 5.0/5
    • (138 jobs)
    First and foremost, I know my hourly rate is high, but being an extremely quick problem solver, I will spend fewer hours finishing your project compared to an average freelancer, while making sure that quality is at the highest level. Please DON'T consider hiring me if: - you are looking for a beginner/mediocre developer that will do the job for you as cheaply as possible - you don't want to discuss and answer questions, share a wider context about your project. I want to provide my services as I was your business partner. - my work doesn't create more value for you than your investment in my work. Key Services: - Design from scratch - BOM optimization - Production management APPLICATIONS • RF design (GPS/GSM/BLE/Wi-Fi/Zigbee) • FPGA • CPU (Allwinner, i.MX6, i.MX7, i.MX8, and others) • Ethernet • Android/Linux and other processor-based devices • USB 2.0/3.0, USB-C • IoT • SMPS power supply, Wireless QI chargers • GaN Chargers and wall adapters • Embedded MCU systems • MEMS (Accelerometer, Gyroscope, Magnetometer) • LED lighting SERVICES • PCB Design & Layout • Electrical Engineering • Realistic 3D PCB Modeling • Prototyping (PCBA) • Cost-effective design consulting • Mass production management • DFM guide OUTPUT • Schematic • Layout • Gerber • BOM • Pick&Place • 3D Model
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    WiFi
    Microcontroller Programming
    Power Electronics
    Altium Designer
    LED Physics
    Raspberry Pi
    Electronic Circuit Design
  • $40 hourly

    • 4.9/5
    • (30 jobs)
    I am an electronics freelancer by trade and my specialty is fast delivery and prototyping. If you need something electronic to be made, I can design it, program it, prototype it and produce it in small to medium quantites. My skills include: -PCB design & Cost Optimization & Manufacture -Embedded Development (Arduino, ESP, Microchip, PIC, nRF) -3D Design & Manufacture (Metal or Plastic) -Power Electronics -Digital Electronics -Wireless Design -Drones & Autonomus Systems
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Microcontroller Programming
    Electronics
    Drone
    Electronic Circuit Design
    Arduino
    Circuit Design
    Firmware
    Altium Designer
    C++
    Power Electronics
    Automotive Engineering
    Electrical Engineering
    Embedded System
    Electronic Design
    Prototyping
  • $90 hourly

    • 5.0/5
    • (16 jobs)
    The services that I offer are circuit design, PCB Design, PCB design review /consulting for cost optimization, circuit board prototyping, embedded design, Arduino and firmware development in C/C++, and power electronic design. I have 8 years of experience in embedded design, circuit design, and PCB design. I'm highly experienced in cost optimizing PCB designs for manufacturing due to experience working at a circuit board assembly manufacturer. I've done a lot of analog circuit design for audio and power supply circuits. I have designed a wide variety of switch mode power supply topologies at power levels from 1W to 300kW. I have extensive experience in PCB design specifically for power electronics to minimize parasitics and maximize efficiency. Most of my experience with microcontrollers is with AVR and Atmel/Microchip ARM using the Microchip Studio ( Previously called Atmel Studio) . I also have a lot of experience with Arduino and embedded design with microcontrollers that are supported by Arduino. The software that I'm fluent with are, Atmel studio, Altium Designer, Circuit Studio, Diptrace, Multisim, Ultiboard, Viewmate, LT Spice, Tina, and Solidworks.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Multilayer PCB
    Altium Designer
    Electrical Engineering
    Circuit Design
    Power Electronics
    Music & Sound Design
    Embedded Application
    Electronic Design
    C++
    User Interface Design
    Arduino
  • $85 hourly

    • 4.9/5
    • (49 jobs)
    Analog and digital design, PCB layout, reverse engineering/debugging/circuit analysis, microcontroller firmware development, data science/machine learning, computer vision, deep learning.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Electronic Design
    Hardware Prototyping
    Electrical Engineering
    Hardware Design
    Microcontroller Design
    KiCad
    Analog Electronics
    Circuit Design
    Digital Electronics
    Embedded System
    Deep Learning
    Computer Vision
    Raspberry Pi
    Microcontroller Programming
  • $85 hourly

    • 4.8/5
    • (32 jobs)
    Freelance Electronic Designer specializing in PCB and Schematic designs using Altium and EagleCad. 30 years of Electronics Experience with discrete, digital, power, microprocessor, RF, and USB designs. Currently building an innovative device for Amateur Radio Digital Communications as a personal project. Have completed certified circuits for Aviation and Marine environments.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    USB Electronics
    Circuit Design
    RF Design
    Eagle
    Electronic Design
    Altium Designer
    Multilayer PCB
  • $40 hourly

    • 4.9/5
    • (137 jobs)
    I am an electronics engineer by profession, passionate and specialize in creating Schematic and PCB design or Layout in multilayers. I have 20 years experience of pcb layout in Altium Designer. PCB Designing, Product designing, Reverse Engineering, Creative Solutions with Electronic. I work in a company based in UK. I can supply a prototype fully tested per your requirements and also run a production for small and medium batches. I can provide a firmware in C and other languages if necessary. All types of MCUs ( Atmel, PICs, ARM, STM etc), programming and debug. Also for products I can offer 3D design and making a prototype.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Prototyping
    PIC Programming
    Circuit Design
    Assembly Language
    Atmel AVR
    Arduino
    IC Solutions PICS
    Product Design
    3D Design
    Reverse Engineering
  • $90 hourly

    • 4.8/5
    • (50 jobs)
    It has been around 15 YEARS for me working on mobile robots, e-VTOL UAV (drones), RF Microwave sensing (i.e. UWB and FMCW RADAR), IoT, and Embedded systems in general. ☑In Upwork, I have helped prototyping some various projects on IoT and embedded systems like: ✅ IoT Dairy Farm, ✅ Automatic hydroponics, ✅ Vending Machine, ✅ Mars Robot, ✅ Personal IoT box ✅ LED, LCD, addressable RGB strip, ✅ Micro/active/passive buzzers ✅ and some IoT/embedded systems projects. ☑I'm familiar with various hardware including: ✅ Various Arduino boards, ✅ SBCs (Raspberry Pi, Banana Pi, Latte Panda, Odroid, Onion, etc), ✅ STM32, ✅ AVR (ATMEGA, ATXMEGA), ✅ ARM Cortex, ✅ ESP32/ESP8266, ✅ Nordic nRF52 (e.g. nRF52840), CC2650 ✅ SDR/USRP, ✅ TI mmWave Radar (e.g. AWR2243). ☑I'm fluent with various IDEs such as: ✅ ArduinoIDE, ✅PlatformIO/VSCode, ✅STM32CubeIDE, ✅Keil IDE, and programming languages like ✅C/C++, ✅Python, and ✅Matlab. ☑ My main expertises are: ✅ PCB design (high-speed, Flexible, Rigid-Flex, multi-layer) and ✅ firmware programming. ☑ I'm also familiar with AWS cloud services: ✅IoT core AWS ✅S3 ✅Lambda ✅MQTT/HTTP API ✅REST API Gateway ☑ Lastly, I have done various AI/machine learning projects where I'm familiar with: ✅Keras ✅TensorFlow ✅PyTorch.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    RF Design
    Electronic Design
    Digital Electronics
    Arduino Firmware
    Electrical Engineering
    Research Papers
    Arduino
    Internet of Things Solutions Design
    Technical Report
    Technical Writing
    Raspberry Pi
    ESP32
    MATLAB
    C++
  • $60 hourly

    • 4.7/5
    • (88 jobs)
    10+ years of freelance product & project management for PCB design and layout, firmware programming, and rapid prototyping. Here is a non-exhaustive list of relevant software/protocols/chipsets: - Strong C++, C, and C# - PCB layout and schematic capture with Altium, Cadence, Eagle, etc., with multilayer, flexible, high-speed embedded systems - FPGA programming with Verilog/VHDL: Altera Quartus, Xilinx, iCECube - Experience with low-cost MCU/single-board prototyping platforms: Arduino, Beaglebone, Raspberry Pi, NanoPi, etc. - ARM: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic33F/18F/16F, Atmega 80251, 8052, 8951, 8051, 16, 32, 128 - Digital interfaces and wireless transmission: UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee (particular experience with BLE HM10, HC05, ESP32, DA14508, nRF52832, 52840, BlueNRG) I also have a background in mechanical engineering and industrial design; I can implement my work into fully realized products for you. Expect me to help your business as if I am growing my own.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Microcontroller Programming
    ESP32
    Core Bluetooth
    Power Electronics
    Computer Hardware Design
    Firmware
    Wireless Communication
    LED Physics
    Electronic Circuit Design
    Rapid Prototyping
    Altium Designer
  • $40 hourly

    • 5.0/5
    • (32 jobs)
    Hello, everyone! I am delighted to introduce you to MicroBitDesign LTD, a forward-thinking company dedicated to delivering cutting-edge solutions in the field of Embedded Systems. As the founder and an Embedded Systems Engineer, I am passionate about offering a range of services that drive innovation and create impactful technological advancements. Our Services: At MicroBitDesign LTD, we specialize in providing comprehensive Embedded Systems solutions tailored to meet your unique needs. Our services encompass: Firmware Development: - From low-level drivers to high-level applications, we design and develop firmware for various microcontrollers, including ARM Cortex M0, M1, M3, M4, and M7-based processors. - We offer expertise in 8, 16, and 32-bit MCUs, and we're well-versed in dual-core MCUs like STM32H7x7 and STM32H7x5. Custom Driver and Library Development: - We excel in creating custom drivers and libraries for a wide range of components, including sensors (temperature, accelerometers, pressure), motor drivers (stepper motors, BLDC, DC, Servo), and communication modules (GSM, GPRS, WiFi, BLE). PCB Design and Hardware Development: - Our team utilizes tools like Eagle CAD and KiCAD to deliver top-notch PCB designs. - We have experience in designing PCB layouts for boards up to 8 layers, ensuring optimal performance and space efficiency. - Our expertise extends to high-speed design and signal integrity, guaranteeing reliable operation for critical applications. - We are well-versed in wireless technologies, enabling seamless integration of wireless communication modules into your designs. Hardware Functionality Testing and Test Jig Development: - We conduct thorough hardware functionality testing and design test jigs to ensure robustness and quality. Key Competencies: Here are some of our core competencies that set us apart in the industry: 1. Versatility and Creativity: We thrive on solving complex challenges and find creative solutions for every project we undertake. 2. Extensive MCU Knowledge: With in-depth knowledge of various MCUs, we can deliver tailored solutions for different application requirements. 3. Custom Driver Expertise: Our ability to write custom drivers for diverse components ensures seamless integration of new ICs into your products. 4. Hardware Design Proficiency: We are well-versed in PCB design, ensuring efficient and reliable hardware solutions for your projects. At MicroBitDesign LTD, we are driven by a relentless pursuit of excellence, and we take pride in our commitment to deliver innovative and reliable Embedded Systems solutions. Whether you require firmware development, hardware design, or custom driver development, we are your trusted partner in turning your ideas into reality. Thank you for your time, and we look forward to collaborating with you to shape the future of technology together!
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    MATLAB
    Bluetooth LE
    ARM Microcontroller
    Electronic Design
    Schematic
    Eagle
    KiCad
    Atmel AVR
    ESP32
    Firmware
    Arduino
    STM32
    Embedded System
    C
    C++
  • $20 hourly

    • 5.0/5
    • (9 jobs)
    I have more than Seven years of industry expertise in the following domain: - Electronic Product Development - PCB Layout design - Embedded Firmware development - Production [] Circuit Designing Software - Altium PCB Design Software - Eagle PCB Design Software [] Firmware development on the following MCUs: - Texas Instrument: MSP430 Series - STM8 and STM32 - PIC-16 and 32 bits controller - Renesas RL78 - ESP32 and ESP8266 - Raspberry Pi - Arduino ATMEGA-328 - Atmel 8051 and 8052 - LoRa gateway - Quectel and SIMCOM GSM, GPRS, GPS modules [] Communication protocol is known: - UART - SPI - I2C - I2S - RS232 - CAN - MODBUS [] Programming Language is known: - C - C++ - Python [] Experience with the following task & project management tools: - JIRA - Atlassian - Microsoft Teams - Trello - Github [] IDEs: - IAR Embedded Workbench for 8051, MSP, and STM - uVision - KEIL-5 - Code Composer Studio - STM-Cube - CS+ Renesas I am Designing Industrial and consumer products since 2015 and have very good experience in Circuit design and embedded product development.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Hardware Design
    Circuit Design
    Internet of Things
    Altium Designer
    Hardware Prototyping
    Eagle
    Electrical Engineering
    Electronic Circuit Design
    Digital Electronics
    Firmware Programming
    Embedded C
    C++
    Arduino
    STM32
  • $70 hourly

    • 4.8/5
    • (42 jobs)
    I am a PCB designer and firmware developer. I have extensive experience in PCB design and I am very proficient at using KiCAD and Altium as a PCB design tool. I have experience in developing low-level firmware for embedded software projects. I have lots of experience writing C code for low-level application that needs to directly interact with external/internal hardware. I specialize in analog electronics, precision design and high-speed electronics. I can help you design, manufacture and assemble your first prototype. I can also cost optimize your design and get it ready for mass manufacturing.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Integrated Circuit
    Hardware Prototyping
    Analog Circuit
    Circuit Design
    Multilayer PCB
    Analog Electronics
    Altium Designer
    KiCad
    Firmware
    Microcontroller Programming
    FPGA
    Embedded System
    C
  • $55 hourly

    • 4.9/5
    • (14 jobs)
    I have 10+ experience in software developing in C/C++ and hardware developing for embedded system such Xilinx FPGAs, Nvidia, NXP, etc. Strong skills: Application development: C++, STL, Boost, CMake System development: C, Linux Kernel, Embedded Linux, Device driver development Board Support Packages: Yocto, Petalinux Xilinx: HLS, OpenCL, Xilinx SDK, Microblaze, Zynq, Petalinux, SDAccel and Vitis (application and platform development). Most part of time I worked in company that develops mission critical boards in the industrial and embedded marketplace. I was responsible for developing firmware, developing device drivers, compiling board support packages, developing SDKs, developing demos and benchmarks, R&D in high performance embedded computing area. I am passionate in developing software for heterogeneous high performance (embedded) computers, based on compute units of different architectures: Xilinx FPGAs , Avelo card and MPSoCs, NVIDIA GPUs, multiple CPUs and others. During last several years I worked with: Xilinx High-end FPGAs and MPSoCs (Ultrascale, Zynq, AWS F1, Vivado, Xilinx SDK, SDAccel and SDSoC, Vitis, Vitis-AI, Accelerating performance-critical part of applications on FPGA with HLS and OpenCL, Developing custom SDAccel/SDSoC platforms)
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Verilog
    Machine Learning
    Software Debugging
    C
    Xilinx
    FPGA
    ARM Microcontroller
    Python
    VHDL
    C++
    Embedded Linux
  • $25 hourly

    • 4.7/5
    • (289 jobs)
    As an Engineer and inventor with over 15+ years of professional experience, I thrive on developing products that meet today's technical challenges head-on. My career has been a fusion of rigorous curiosity and precise technical skill, topping in a deep well of expertise that’s ready to tackle your project. Here's a snapshot of the domains I've grasped: Hardware Specialties 💻🔌 ✅ Embedded systems: programming, hardware design, and firmware development from concept to execution, including ARM-based controllers, DSP, and FPGA technologies. ✅ PCB Design: Expert in designing layouts and schematics, bringing circuits to life flawlessly. Wireless Communication: Proficient with Bluetooth, WiFi, RF protocols, and crafting IoT devices that empower smart connectivity. ✅ Sensor Savant: MEMS / IMU, GPS tracking, and biometric identification through RFID and fingerprint technology. ✅ Design Tools: Proficient with industry-leading software such as Altium Designer, Eagle CAD, KiCAD, Proteus, etc. Software Proficiency 👨‍💻📲 ✅ App Development: Crafting responsive, user-friendly web and mobile apps optimized for IoT solutions, enhancing functionality and user experience. ✅ Web Design & Deployment: Custom WordPress solutions, e-commerce, APIs, and more. ✅ Coding Languages: Kotlin, Java, C++, and C# form the foundational backbone of my custom software solutions. ✅ Data Handling: Experienced in CMS, API integrations, and web scraping for robust, seamless user experiences. Mechanical Design Services 🧰 ✅ Enclosure Designing: Merging technical requirements with aesthetic considerations to design custom enclosures that heighten the value and usability of electronics. 🚀 I'm excited to collaborate and bring your vision to completion, incorporating your innovative ideas with my technical know-how to leave a mark on the future. Tags: Electrical Engineer, Electrical Engineering, Electronics, Hardware, Firmware, PCB, PCB layout, Board Layout, Schematics, Altium Designer, IoT, Internet of Things, Power Electronics, Bluetooth, BLE, TI, Texas Instruments, FPGA, SoC, VHDL, Verilog, Xilinx, Altera, VHDL, C, C++, MCU, RTOS, Microcontroller, prototype, validation, Enclosures, BMS, SolidWorks, Android, iOS, Java, Swift, Mobile Apps, Database, React, AWS, Python, ESP32, Arduino, PLATFORMIO, PIC, NXP, Texas Instrument, Nordic, DIALOG, STM32, LCD, Raspberry Pi, Robotics, Oil and Gas Automation, RF, XBEE, Wi-Fi, BLE, Production, Prototyping, LoRa WAN, Manufacturing, Assembly, Motor Driver, Prototype, Wireless Module, Controllers, PLC, CREO, Industrial Designer, EASY EDA, KiCAD. Warm Regards, Huzaifa Ali
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Multilayer PCB
    Electronic Design
    Electronic Circuit Design
    Internet of Things Solutions Design
    Digital Electronics
    React Native
    Circuit Design
    Altium Designer
    Arduino Firmware
    Raspberry Pi Firmware
    STM32
    ESP32
    Embedded System
    Microcontroller Programming
  • $30 hourly

    • 4.9/5
    • (84 jobs)
    PROFILE Formerly Ass. Prof. in the Military Technical College. • Microwave and RF system design engineer • Analog and digital circuit design engineer • CAD/CAM engineer for PCB design and manufacture by CNC machines • Microwave and RF circuit design engineer • Microwave receiver expert. • University lecturer (Microwaves, Receivers, Logic Circuits, Electromagnetic Fields and Computer Networks). KEY ACHIEVEMENTS • Design, implementation, and testing of hundreds of RF and MW filters. • Design, implementation, and testing of wide-band printed dipole antennas (2009- 2013). • Author of 24 papers published in different international conferences and academic magazines, most of which are single-author papers. • Design, implementation, and measurement of a complete DRFM. • Proposing a new method for digital frequency translation using DRFM. It was published in a paper and successfully implemented. • Supervision of 4 MSc. Theses and 1 Ph.D. Thesis. • Reviewing 5 Msc. Theses and 5 papers. • Leading more than 30 graduation projects. • Hundreds of RF and Microwave PCB's have been designed by me and prototyped under my direct supervision. Most of those circuits were Microstrip circuits. Some coplanar waveguide circuits have also been designed and implemented. • FR4 was the main substrate in most designs. Different professional substrates (of Rogers and Arlon products) have been used in my designs with relative permittivity ranging between 2 and 10.5 and dielectric height between 0.2 and 2.6 [mm]. CAPABILITIES I can design RF systems and circuits, RF antennas and electronic circuits, give you full design and prototyping documentation (including design description, design equations and calculations, simulation results, schematic and layout drawings, Gerber files, Excellon files and BOM files, test procedures and test recommendations) and give full technical assistance to you in prototype building and testing. No prototype building No software coding
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Digital Electronics
    Electrical Engineering
    Circuit Design
    RF Microwave Design
    Electronic Design
    System Analysis
    Instrumentation
    Amplifiers & Filters
    Scientific Writing
    Analog Electronics
    Antenna Design
    Eagle
    RF Design
  • $65 hourly

    • 4.7/5
    • (45 jobs)
    "𝗘𝘃𝗲𝗿𝘆𝗼𝗻𝗲 𝗰𝗮𝗻 𝗱𝗲𝗹𝗶𝘃𝗲𝗿 𝗥𝗘𝗦𝗨𝗟𝗧𝗦 𝗯𝘂𝘁 𝗼𝗻𝗹𝘆 𝗮 𝗳𝗲𝘄 𝗰𝗮𝗻 𝗱𝗲𝗹𝗶𝘃𝗲𝗿 𝗦𝗔𝗧𝗜𝗦𝗙𝗔𝗖𝗧𝗜𝗢𝗡" 🔥 𝗧𝗼𝗽-𝗥𝗮𝘁𝗲𝗱 𝗣𝗹𝘂𝘀 | 💪 𝗔𝗺𝗼𝗻𝗴 𝘁𝗵𝗲 𝘁𝗼𝗽 𝟯% 𝗼𝗳 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗲𝗿𝘀 𝗼𝗻 𝗨𝗽𝘄𝗼𝗿𝗸 |⭐𝟱 𝗦𝘁𝗮𝗿 𝗥𝗮𝘁𝗶𝗻𝗴 | 👍𝟭𝟬𝟬% 𝗝𝗼𝗯 𝗦𝘂𝗰𝗰𝗲𝘀𝘀 |✔︎ 𝟯𝟱+ 𝗝𝗼𝗯𝘀 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗱 | 💰𝗖𝗼𝘀𝘁 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝘁 𝕀 ℂ𝔸ℕ ℙℝ𝕆𝕍𝕀𝔻𝔼 𝕐𝕆𝕌 𝔽𝕆𝕃𝕃𝕆𝕎𝕀ℕ𝔾 𝔼ℕ𝔾𝕀ℕ𝔼𝔼ℝ𝕀ℕ𝔾 𝕊𝔼ℝ𝕍𝕀ℂ𝔼𝕊 . My design work has been for commercial customers, including several Fortune 500 firms. I have strong grip on Firmware writing and Hardware designs. Because of my 12 years experience, it is highly likely I've already worked with the technologies you need to make your project a success. PRODUCT DEVELOPMENT - Circuit Design and Schematic Capture - Bills of Material and Part Sourcing - Printed Circuit Board Layout and Manufacturing Data - Assembly and Fabrication Drawings - Prototyping - Debug - Product Testing - Embedded Firmware and Application Software • ESp32/ESP8266 programming using in ESP-IDF/ Arduino • STM32 ARM M3 programming in Keil-MDK,STM32CUBE IDE and Micro C pro for ARM. • Linux Programming for Raspberry Pi Programming for I/O read /Image processing. • Nordic Semiconductor nFR series Wireless SoCs • Amazon IOT core • FreeRtos / MQXRTOS / Mongoose OS. • Experience with LAN, TCP/IP, wifi, LORA, Bluetooth, BLE, RS232, I2C, SPI, RS485, MOD Bus, etc. • Experience with Temperature ,Humidity, gyro, Accelerometer, Light, Sound, Power, CO2 and Medical sensors and many more My lab is equipped with all the necessary hardware/firmware development equipment, including oscilloscopes, signal generators and analyzers, power supplies, and a myriad of other miscellaneous tools useful for debug and test. To see some of the examples of my work, Please check out my project list. Thank you, Abu.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    nRF51
    ESP32
    STM32
    Microcontroller
    nRF52
    Circuit Design
    Arduino
    Embedded System
    Computer Hardware
    C++
    Microcontroller Programming
    Electrical Engineering
  • $39 hourly

    • 4.8/5
    • (67 jobs)
    🏆 100% Job Success | 👑TOP RATED Plus | 60+ happy clients | 3000+ Hrs 💬 "Pramil is an excellent communicator. We have worked together on many projects, he is thorough, thoughtful and is very open to constructive criticism and feedback. He also ensures he's always available to discuss your project when needed. He's a pleasure to work with." ⭐⭐⭐⭐⭐ — CTO @ Able Innovations Inc 💬 "Pramil was extremely well-versed with the requirements of the job and was comfortable working with minimal prior documentation. He went beyond the requirements at every stage to provide suggestions and improvements." ⭐⭐⭐⭐⭐ — COO @ eLogicTech Solutions ⚒ Key Services: ✅ Circuit and PCB design from scratch (Altium / KiCAD / EasyEDA ) ✅ Circuit Simulation (NI Multisim / LTspice ) ✅ BOM optimization ✅ Prototyping ✅ PCB mass production and assembly management ✅ Design consulting for reliable and Cost-effective electronics hardware Hello, As an industrial designer, my areas of expertise include PCB design, schematic capture, BOM optimization, PCB fabrication, and PCBA. My diversified experience in the PCB design field allows me to quickly understand and optimize products for long run, low cost, DFM, and DFT. If you have to solve your design problem, I can help you. I'm on your design team until you are satisfied with the job. Contact me or save my profile link to come back when needed. I am looking forward to building the best product of my life with you. Best Regards Pramil W. ********************************************* Scope of work in past experience 💪 I build hardware for ultra-low power, renewable energy, energy harvesting, wireless and wearable High power high Voltage (AC)Automobile Power Distribution, Motor Drivers, Input Protections, BMS, chargers, home automations, industrial sensor and controller Controller/Processors I used STM32, ESP32, NRF52xx, ESP8266, AVR, MSP430, RP2040, Raspberry pi etc. 📱📶📡 Wireless communication technology hardware I build and test: 4G LTE CAT-1, WiFi, BLE, LoRa, GPS, RFID, NFC 🔧📦 Tools I love Altium Designer, KiCad Designer, EasyEDA, LTspice, Multisim, Drow.io, Blender
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Hardware Design
    Robotics
    ESP32
    Multilayer PCB
    Electronic Circuit Design
    Circuit Design
    Altium Designer
    Internet of Things
    Raspberry Pi
    KiCad
    Electronics
    Electronic Design
    Product Design
    Prototyping
  • $50 hourly

    • 4.8/5
    • (39 jobs)
    As an experienced Embedded System Designer and FPGA Developer, I bring a strong background in electronics industry and a track record of successful project delivery. With a focus on quality and innovation, I am dedicated to meeting clients' requirements and exceeding expectations. Here's what sets me apart: Skills and Expertise: Embedded Systems: I excel in designing, prototyping, and programming microcontrollers for various applications. My expertise includes circuit layout and design, ensuring efficient and reliable functionality. FPGA Development: Proficient in programming FPGAs using Xilinx and Altera platforms, I can create complex digital designs and optimize system performance. PCB Designing: Utilizing Altium Designer, I have extensive experience in designing high-quality printed circuit boards (PCBs) that meet industry standards and client specifications. CAD Model Designing: I possess strong skills in creating detailed CAD models, enabling accurate visualization and effective collaboration in the design process. Electronics and Coding: I am well-versed in troubleshooting electronics-related problems and possess a solid foundation in coding for embedded systems. Projects and Accomplishments: Successfully delivered multiple projects in the electronics industry, demonstrating my ability to manage and execute end-to-end design processes, from concept to production. Led the development of innovative embedded systems solutions for diverse applications, including medical, Fire Fighter equipments, Textile Industry and so on . Implemented FPGA-based designs that improved system performance and optimized resource utilization, resulting in enhanced functionality and cost-effectiveness. Collaborated with cross-functional teams to ensure seamless integration of hardware and software components, achieving robust and reliable systems. With a strong foundation in embedded systems design and FPGA development, I am committed to delivering high-quality, efficient, and reliable solutions to clients. Whether you require a dedicated team member or a freelance consultant, I am confident in my ability to contribute to your project's success. Let's work together to bring your ideas to life.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Electrical Layout Design
    Antenna Design
    STM32
    Microcontroller Programming
    Embedded System
    Arduino Firmware
    PIC Programming
    ESP32
    Hardware Design
    Altium Designer
    Digital Electronics
    Firmware Programming
    Electronic Circuit Design
    Product Design
  • $27 hourly

    • 5.0/5
    • (61 jobs)
    I am a mechatronics engineer experienced in electronic circuits and embedded systems/ microcontrollers programming - I have experienced in electronic and PCB circuit design ( high speed, power electronics, mixed-signal, multilayer). - I have experience working in embedded systems programming ( Arduino, ESP..). - Experienced in mechanical and electrical simulation using Matlab, LTspice, and Proteus.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Analog Circuit
    Digital Design
    Electrical Engineering
    Eagle
    Electronic Circuit Design
    Arduino
    RF Design
    Hardware Design
    Multilayer PCB
    Autodesk Fusion 360
    Power Electronics
    Hardware Prototyping
    Reverse Engineering
  • $75 hourly

    • 5.0/5
    • (79 jobs)
    ►Capabilities: ----------------- ☑ Design, review, hand-assembly, troubleshooting, and rework of electronic designs. ☑ Microcontroller programming. ☑ High-speed signal routing (USB, HDMI, Ethernet, etc.) involving microprocessors or FPGAs with DDR3 or DDR4. ☑ Ultra-low power designs consuming microamps during standby for long battery life. Use of Altium Designer, KiCad, and Cadence OrCAD. With my Altium subscription, I can share designs over Altium 365 to provide you with a convenient view of progress through your web browser. ☑ PoC (Proof of Concept) app development using HTML, JavaScript, Python, Java, Microsoft Windows, and Linux. ☑ In-house equipment including an oscilloscope, multimeter, power supply, soldering iron, hot-air rework station, hotplate, and optical inspection equipment. ► Typical Deliverables: ---------------------------- ☑ PDFs of schematics, image previews of board layout, and all design files. ☑ Bill of Materials (parts list spreadsheet, prices from desired vendors). ☑ Microcontroller/application code (C, C++, Java, Python, HTML, CSS, etc.). ☑ Two or several hand-assembled PCBs. ☑ For high-volume production, an affordable arrangement for turn-key manufacturing. ☑ Free troubleshooting support for simple problems long after an ended contract with me. ► Typical Design Workflow for Circuit Board Design from Start to Finish: ---------------------------------------------------------------------------------------- Actual workflow may vary for unique projects, but each step of the way I will work with you to ensure your requirements are met. 1️⃣. The client shares their initial requirements (ideas, features, recommended parts, etc.). 2️⃣. Estimation for hourly/fixed-price. Projects with: a) well-defined requirements, fixed-price is acceptable, b) requirements that are more open-ended, hourly is acceptable. 3️⃣. A contract is started. 4️⃣. An initial schematic is designed with readily available components, along with a BOM (Bill of Materials). Development boards, breadboards, and simulators can be used for prototyping before circuit board design. 5️⃣. Circuit board placement and layout. 6️⃣. Prototype material procurement: BOM is ordered. Gerber files are generated and sent to a circuit board fabricator for the production of bare boards. 7️⃣. Bare circuit boards can be hand-assembled in-house by me. For more complex boards with hundreds of surface-mount parts, turn-key manufacturing can be arranged. 8️⃣. Prototype boards are tested according to the client's requirements. 9️⃣. All design files are updated to reflect any modifications needed for the prototype circuit board. These files are shared with you, the client. 🔟. Now any capable electronics manufacturing service can produce your project. I have been professionally consulting with clients since 2018. Please feel free to challenge me with your interesting projects! I strive to answer invites within 24 hours.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Arduino Firmware
    Arduino IDE
    Circuit Design
    OrCAD
    Microcontroller Programming
    Python
    Arduino
    KiCad
    Altium Designer
    Node.js
    ESP8266
    ESP32
    AVR Microcontroller
  • $30 hourly

    • 4.7/5
    • (249 jobs)
    ✅Circuit Design ✅ PCB design ✅ Microcontroller Programming ✅ Circuit Simulation ⭐⭐⭐⭐EXPERTISE⭐⭐⭐⭐ ✅Circuit Designing ✅Schematics Capture and PCB design using ALTIUM, ORCAD, KiCAD, EAGLE ✅PCB Design upto 10 layers with SMT+THT ✅GERBER, BOM, Pick and Place Files generation ✅Circuit Simulation and Analysis in ❇️LTSpice (Transient analysis, AC Sweep, DC Sweep, Frequency Response, Bode Plot, FFT, Temperature and Parameter Sweep, DC op point analysis) ❇️PROTEUS ❇️Multisim ❇️Keysight ADS ❇️TI Filter Pro ❇️ LTSpice ❇️CST Microwave ❇️Ansys HFSS ✅Microcontroller Programming Source and HEX Code ❇️PIC10F222 ❇️PIC12F675 ❇️PIC12F629 ❇️PIC16F84 ❇️PIC16F628 ❇️PIC16F676 ❇️PIC18F4550 ❇️ATMEGA32 ❇️ATMEGA64 ❇️AT89C2051 ❇️AT89C51 ❇️Arduino UNO ✅Product Development. PCB Fabrication PCB Assembly ⭐⭐⭐⭐SPECIFICS ⭐⭐⭐⭐ ✅Analog Circuit ✅Digital Circuits ✅Audio Circuits ✅Microwave/RF ✅Power Electronics ✅Embedded, Printed Circuit Boards, , PCB layout, ⭐⭐DISCRETE SEMICONDUCTOR DEVICES⭐⭐ Diodes, TVSD, MOSFET, IGBT, TRIACs, SCR, OPAMPs, BJT NPN/PNP and FET Transistors, Digital ICs, Counter, Timer, Latch, Frequency Divider, 7 Segment Display driver, LED driver, Serial Clock and calendar RTC DS1307 interface with memory management 24LC08 serial EEPROM ⭐⭐ AUDIO PROJECTS⭐⭐ ✅Audio Amplifier, ✅Hearing Aid loop amplifier, ✅Boomer speaker driver, ✅Power amplifier, Class A, Class B, Class AB, Class C amplifier, ✅Push Pull amplifier, ✅Electret Microphone amplifier, ✅LR phone jacks, ✅Mono stereo circuits, ✅Programmable gain, ✅Audio recording, ✅TDA7297, LM358, LM4950, Integrated Circuits based amplifier design ✅Class D power amplifier design using Texas Instruments TAS5613A, ✅MEMS microphone based acoustic direction finder, ✅ECC88 Tube amplifier, ✅Stereo/Mono amplifier, ✅Sallen Key Filter, Active Filter, ✅Tone Control Circuits ✅Active Crossover Network Design for Audio Amplifier ✅Passive Filter, ⭐⭐ ANALOG CIRCUITS PROJECTS⭐⭐ ✅EEG Circuit, ECG Circuit, ✅Instrumentation Amplifier, ✅Differential amplifier, ✅Human Proximity Sensor Design ✅Metal Detector ✅ICL-7107 display IC based voltage and current meter ✅Signal Conditioning Circuit Design ✅OPAMP Comparator Circuit for feedback control, analog voltage monitor ⭐⭐POWER ELECTRONICS PROJECTS⭐⭐ ✅Linear and Switching Voltage Regulators and Converter Circuit Design ✅Power Management IC based designs ✅Under voltage, Over voltage, transient, FET ringing, overshoot, reverse polarity protection circuits ✅Super Capacitors Chargers ✅Charge Management ✅Lithium Ion Battery Chargers ✅Automatic Voltage Stabilizer ✅SSR and Relays Circuits ✅ Inrush current protector circuit design ✅Transformerless Power supply design ✅Digital Voltmeter design ✅DC to DC buck boost converter design ✅AC-DC Converters, ✅High Power High Brightness LED lights control circuit design ✅Laser Diode driver design ⭐⭐RF/MICROWAVE PROJECTS⭐⭐ ✅Antenna Design in ANSYS HFSS, ✅RF Circuit Design and Simulation in Keysight ADS Software ✅Cree Wolfspeed CG2H40010F HEMT based X band power amplifier design at 8250MHz @ 10W based on microstrip technology , ✅Filter design ✅Directional Coupler design ✅Interfacing Bluetooth 4.0 with PIC16F676 microcontroller for wireless data transfer of android mobile GPS Coordinates ⭐⭐SENSOR ELECTRONICS PROJECTS⭐⭐ ✅Temperature PT-100, RTD, K type and T-Type thermocouple ✅LM35 temperature sensor ✅Humidity SHT-75 ✅Proximity ✅IR ✅Pressure ✅Sensor Array ✅Sensor Interface ✅Experience with sensor calibration. ✅DS18B20 based Temperature control unit with relay output to FAN and HEATER ⭐⭐MOBILE APPS⭐⭐ ✅Android and i-phone mobile application development ⭐⭐WRITING⭐⭐ ✅Technical Writing, Article, SEO, Blog, Academic writing, Assignments, Solutions, Mathematics, Physics, Literature review, programming, algebra 🔥🔥CUSTOMER SATISFACTION 🔥🔥 PLEASE FEEL FREE TO ASK ANY QUESTIONS YOU HAVE 💲💲VERY REASONABLE HOURLY RATE 💲💲 🕘🕘AVAILABLE AT YOUR SERVICE ANYTIME🕘🕘 THANK YOU AND BEST REGARDS 😊😊😊😊 MUHAMMAD FAIZAN KHALID E-TECH SOLUTIONS
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Proteus Design Suite
    Analog Audio
    Electronic Design
    Microcontroller Programming
    Altium Designer
    Electrical Engineering
    Analog Electronics
    Electronic Circuit Design
    Printed Circuit Board
    Power Electronics
    RF Microwave Design
    Digital Electronics
    Circuit Diagram
    Design Simulation
    Circuit Design
    Analog Circuit
    Schematic
  • $45 hourly

    • 5.0/5
    • (3 jobs)
    I am Senior Engineer with 18 years' experience in product Research and Development, management of R&D, Embedded system design, specialized PCB design, technical consulting, production organization & product certification assistance. Providing the following services to the clients world-wide: ✔ Product R&D and design problem solving, ✔ Embedded system design (schematic, PCB design, firmware development), ✔ Specialized PCB design and optimization: ➕ Hi-speed industrial computers ➤ USB, ETH, HDMI, MII/RMII, miniPCIe, SDIO etc. ➕ Power electronics ➕ EMC optimization and problem solving ✔ Product cost evaluation and BOM optimization, ✔ Proof of concept & experimental devices, ✔ Technical consulting in system design and RF related solutions, ✔ Production organization & product certification assistance.
    vsuc_fltilesrefresh_TrophyIcon PCB Design
    Procurement
    Power Electronics
    Printed Circuit Board
    Hardware Design
    Research & Development
    Electronic Design
    Digital Electronics
    Multilayer PCB
    Altium Designer
    Circuit Design
    Product Development
    C
    Embedded C
    Embedded System
  • Want to browse more freelancers?
    Sign up

How it works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

PCB Designers Hiring FAQs

What is PCB design?

PCB, or printed circuit board, design is a foundation of electrical engineering, providing the connectivity between components necessary for powered devices such as cell phones, remote controls, and even robots to function. PCB designers assemble top-quality PCBs for specific technological needs and ensure a product excels in the competitive tech market.

How do you hire a PCB designer?

You can source PCB design talent on Upwork by following these three steps:

  • Write a project description. You’ll want to determine your scope of work and the skills and requirements you are looking for in a PCB designer.
  • Post it on Upwork. Once you’ve written a project description, post it to Upwork. Simply follow the prompts to help you input the information you collected to scope out your project.
  • Shortlist and interview PCB designers. Once the proposals start coming in, create a shortlist of the professionals you want to interview. 

Of these three steps, your project description is where you will determine your scope of work and the specific type of PCB designer you need to complete your project. 

How much does it cost to hire a PCB designer?

Rates can vary due to many factors, including expertise and experience, location, and market conditions.

  • An experienced PCB designer may command higher fees but also work faster, have more-specialized areas of expertise, and deliver higher-quality work.
  • A contractor who is still in the process of building a client base may price their PCB design services more competitively. 

Rates typically charged by PCB designers on Upwork are:

  • Beginner: $25 per hour
  • Intermediate: $45 per hour
  • Advanced: $200 per hour

Which one is right for you will depend on the specifics of your project. 

How do you write a PCB designer job post?

Your job post is your chance to describe your project scope, budget, and talent needs. Although you don’t need a full job description as you would when hiring an employee, aim to provide enough detail for a contractor to know if they’re the right fit for the project.

Job post title

Create a simple title that describes exactly what you’re looking for. The idea is to target the keywords that your ideal candidate is likely to type into a job search bar to find your project. Here are some sample PCB designer job post titles:

  • Looking for a PCB designer to troubleshoot an Arduino board
  • Seeking a PCB designer to design and build a museum- exhibit audio player
  • PCB designer needed for a low-level light- therapy project

Project description

An effective PCB designer job post should include: 

  • Scope of work: From component specs to testing prototypes, list all the deliverables you’ll need. 
  • Project length: Your job post should indicate whether this is a smaller or larger project. 
  • Background: If you prefer experience with certain industries, software, or building tools, mention this here. 
  • Budget: Set a budget and note your preference for hourly rates vs. fixed-price contracts.

PCB designer job responsibilities

Here are some examples of PCB designer job responsibilities:

  • Design and develop PCB layouts for reliable high-speed circuits
  • Test, troubleshoot, and resolve issues with PCB functionality
  • Review existing designs for areas that need updating or improvement
  • Place components while maintaining integrity between them

PCB designer job requirements and qualifications

Be sure to include any requirements and qualifications you’re looking for in a PCB designer. Here are some examples:

  • Experience designing or assisting with designing PCBs
  • Background in electrical engineering or mechanics
  • Understanding of circuit requirements and limitations
  • Experience with CAD (computer- aided drafting) and producing design drawings
Read more
View less
Schedule a call

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.