Strong SRT 24HY4003 manual

The ideal viewing distance for your Strong television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

The screen size of the Strong SRT 24HY4003 is 24 ".

The screen resolution of the Strong SRT 24HY4003 is 1366 x 768 pixels.

No, the Strong SRT 24HY4003 does not have a 3D feature. This means that users will not be able to watch 3D movies or TV shows on this television.

The display resolution of the Strong SRT 24HY4003 is 1366 x 768 pixels. This is a high definition (HD) resolution, which will provide users with clear and detailed images on the screen.

No, the Strong SRT 24HY4003 is not a smart TV. This means that users will not be able to access internet services or stream content directly on the TV.

The display brightness of the Strong SRT 24HY4003 is 200 cd/m². This is relatively low compared to other TVs, which may affect the overall brightness and clarity of the images displayed on the screen.

Yes, the Strong SRT 24HY4003 has built-in speakers. This means that users will not need to purchase separate speakers to enjoy audio from the TV.

To connect external devices to the Strong SRT 24HY4003 television, follow these steps: 1. Identify the available input ports on the television. These ports are usually located on the back or side of the TV and may include HDMI, USB, AV, and VGA ports. 2. Determine the type of connection required for your external device. For example, if you want to connect a DVD player, check if it has an HDMI or AV output. 3. Use the appropriate cable to connect the external device to the corresponding input port on the TV. For HDMI connections, use an HDMI cable. For AV connections, use RCA cables with red, white, and yellow connectors. 4. Ensure that both the TV and the external device are powered off before making the connection. 5. Plug one end of the cable into the output port of the external device and the other end into the input port of the TV. 6. Power on both the TV and the external device. 7. Use the TV remote control to select the input source corresponding to the connected device. This can usually be done by pressing the "Source" or "Input" button on the remote and navigating to the appropriate input option. 8. Once the correct input source is selected, you should see the content from the external device displayed on the TV screen. Note: The specific steps may vary depending on the type of external device you are connecting. Refer to the device's user manual for more detailed instructions if needed.

The picture quality on your Strong SRT 24HY4003 television may not be clear due to various reasons. Here are some possible causes and solutions: 1. No color: Change the color system and adjust the saturation. Also, try another channel as a black-and-white program may be received. 2. The remote control does not work: Change the batteries and ensure they are installed correctly. Also, check if the main power is connected. 3. No picture, normal sound: Adjust the brightness and contrast settings. Broadcasting failure may also be a possible cause. 4. Normal picture, no sound: Press the volume up button to increase the volume. If the volume is set to mute, press the mute button to restore the sound. Additionally, try changing the sound system. Broadcasting failure may also be a possible cause. 5. Unorderly ripples on the picture: This is usually caused by local interference such as cars, daylight lamps, and hair dryers. Adjust the antenna to minimize the interference. 6. Snowy dots, blocking, and interference: If the antenna is located in a fringe area with weak signal, the picture may be affected. Install a special antenna, adjust the position and orientation of the antenna, check the antenna connection, and fine-tune the channel. Broadcasting failure may also be a possible cause. 7. Ghosting: Ghosts in the picture are caused by the television signal following two paths. Try changing the direction or position of the antenna to improve reception. 8. Radio frequency interference: This interference produces moving ripples or diagonal streaks in the picture. Find and remove the source of radio interference. 9. Playback of video causing picture freeze or distortion: Ensure that your USB storage device has sufficient speed and space. Some pen drives (USB sticks) may not support sufficient speed. Please note that these are general troubleshooting steps. If the issue persists, you may need to consult the user manual or contact customer support for further assistance.

To set up the channels on your Strong SRT 24HY4003 television, follow these steps: 1. Press the MENU button on your remote control to access the main menu. 2. Use the arrow buttons (usually labeled as up, down, left, and right) to navigate to the "Channel" or "Installation" menu option. 3. Press the ENTER or OK button to enter the Channel menu. 4. In the Channel menu, select the "Auto Tuning" or "Auto Scan" option. This will initiate an automatic search for available channels. 5. Wait for the TV to scan and detect the available channels. This process may take a few minutes. 6. Once the scan is complete, the TV will display a list of found channels. 7. Use the arrow buttons to navigate through the list of channels. Press the ENTER or OK button to select a channel. 8. Repeat the process for each channel you want to add to your channel list. 9. If you want to manually tune a specific channel, select the "Manual Tuning" option in the Channel menu. Enter the frequency or channel number using the numerical buttons on your remote control. 10. After adding or tuning the channels, you can use the arrow buttons to navigate through the channel list and press the ENTER or OK button to watch a selected channel. Note: If you have an active antenna or cable connection, make sure it is properly connected and turned on before starting the channel setup process. Please note that the steps may vary slightly depending on the specific menu layout of your Strong SRT 24HY4003 television.

If the sound is not working on your Strong SRT 24HY4003 television, you can try the following troubleshooting steps: 1. Check the volume level: Press the volume up button on your remote control to increase the volume. Make sure the volume is not set to mute. If it is, press the mute button to restore the sound. 2. Check the audio settings: Press the MENU button on your remote control to access the main menu. Navigate to the "Audio" or "Sound" settings. Ensure that the audio settings are configured correctly, such as selecting the appropriate sound mode (e.g., stereo, surround) and adjusting the balance or equalizer settings if necessary. 3. Check the external audio devices: If you have connected external audio devices, such as speakers or soundbars, ensure that they are properly connected to the TV and powered on. Check the input source and settings on the external audio device to ensure it is receiving the audio signal from the TV. 4. Perform a power cycle: Turn off the TV and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset any temporary issues that may be affecting the sound. 5. Check the broadcast source: If you are experiencing sound issues with a specific channel or program, try switching to a different channel or source to see if the problem persists. It could be a temporary issue with the broadcast signal. If none of these steps resolve the sound issue, you may need to contact customer support for further assistance or refer to the user manual for more specific troubleshooting steps.

To access the electronic programme guide (EPG) on your Strong SRT 24HY4003 television, follow these steps: 1. Press the EPG button on your remote control. This button is usually labeled as "EPG" or "Guide". 2. The EPG interface will appear on the screen. The second bar from the top will display the current date and time. 3. The channel you are currently watching will be highlighted in the list below. Before you can view any EPG information, you need to activate every channel for which you want to view programme information. To activate a channel, use the arrow buttons to select the channel, then press the ENTER or OK button to confirm. 4. To check programmes that will be broadcasted on a future date, scroll up to the date field using the arrow buttons. Use the arrow buttons to select the date you want to check. 5. Press the arrow buttons to scroll through the time slots and view the programme information for each channel. 6. Press the GREEN button on your remote control to show detailed information about the selected programme. 7. Press the YELLOW button to display the Schedule List. Use the arrow buttons to select an event, and press the RED button to delete an event. 8. Press the BLUE button to display a reminder menu. Use the arrow buttons to select an item and the arrow buttons to change the setting. Press the ENTER or OK button to add the reminder event to the schedule list. 9. To exit the EPG menu, press the MENU button on your remote control. Please note that the steps may vary slightly depending on the specific menu layout of your Strong SRT 24HY4003 television.

To connect external devices to the Strong SRT 24HY4003 television, follow these steps: 1. Identify the available input ports on the TV. These may include HDMI, USB, AV, and VGA ports. 2. Determine the type of connection required for your external device. For example, if you want to connect a DVD player, you may need to use an HDMI or AV cable. 3. Connect one end of the cable to the corresponding output port on your external device. For example, if using an HDMI cable, connect one end to the HDMI output port on the DVD player. 4. Connect the other end of the cable to the corresponding input port on the Strong SRT 24HY4003 television. For example, if using an HDMI cable, connect the other end to an available HDMI input port on the TV. 5. Ensure that both the external device and the TV are powered on. 6. Use the TV remote control to select the appropriate input source. This can usually be done by pressing the "Source" or "Input" button and navigating to the desired input option. 7. Once the correct input source is selected, you should see the content from your external device displayed on the Strong SRT 24HY4003 television. Note: The specific steps may vary depending on the type of external device you are connecting. Refer to the user manual of your external device for detailed instructions on connecting it to a TV.

The picture quality on your Strong SRT 24HY4003 television may not be clear due to various reasons. Here are some possible causes and solutions: 1. No color: Change the color system, adjust the saturation, or try another channel as a black-and-white program may be received. 2. The remote control does not work: Change the batteries or ensure that the batteries are installed correctly. Also, check if the main power is connected. 3. No picture, normal sound: Adjust the brightness and contrast settings. It could also be a broadcasting failure. 4. Normal picture, no sound: Press the volume up button to increase the volume. If the volume is set to mute, press the mute button to restore the sound. You can also try changing the sound system. Again, broadcasting failure may be a possible cause. 5. Unorderly ripples on the picture: This is usually caused by local interference such as cars, daylight lamps, or hair dryers. Adjust the antenna to minimize the interference. 6. Snowy dots, blocking, and interference: If the antenna is located in a fringe area with weak signal, the picture may be affected. Consider installing a special antenna, adjusting the position and orientation of the antenna, checking the antenna connection, fine-tuning the channel, or trying another channel. Broadcasting failure may also be a factor. 7. Ghosting: Ghosts in the picture are caused by the television signal following two paths. Try changing the direction or position of the antenna to improve reception. 8. Radio frequency interference: This interference can result in moving ripples, diagonal streaks, or loss of contrast in the picture. Identify and remove the source of radio interference. 9. Playback of video causing picture freeze or distortion: If you experience picture freeze or macro blocks during video playback, especially on HD content, it could be due to low read/write speed of your USB device. Ensure that you use a USB storage device with sufficient speed and space. Please note that these troubleshooting steps are general guidelines. For more specific instructions or if the issue persists, refer to the user manual of the Strong SRT 24HY4003 television.

To set up the channels on your Strong SRT 24HY4003 television, follow these steps: 1. Press the MENU button on your remote control to access the main menu. 2. Use the arrow buttons (usually labeled as UP, DOWN, LEFT, RIGHT) to navigate to the "Channel" or "Installation" menu. 3. Press the ENTER or OK button to enter the Channel menu. 4. In the Channel menu, select the "Auto Tuning" or "Auto Scan" option. This will initiate an automatic search for available channels. 5. Wait for the TV to scan and detect the available channels. This process may take a few minutes. 6. Once the scan is complete, the TV will display a list of found channels. 7. Use the arrow buttons to navigate through the list of channels. Press the ENTER or OK button to select a channel. 8. Repeat the process for each channel you want to add. 9. If you want to manually tune a specific channel, select the "Manual Tuning" option in the Channel menu. Enter the frequency or channel number using the numerical buttons on your remote control. 10. After adding or tuning the channels, press the EXIT or MENU button to exit the Channel menu. Note: The specific steps may vary slightly depending on the firmware version of your Strong SRT 24HY4003 television. Refer to the user manual for more detailed instructions if needed.

There could be several reasons why the sound is not working on your Strong SRT 24HY4003 television. Here are some possible causes and solutions: 1. Check the volume level: Press the volume up button on your remote control to increase the volume. Ensure that the volume is not set to mute by pressing the mute button to restore the sound. 2. Change the sound system: In the TV menu, navigate to the sound settings and try changing the sound system to see if it resolves the issue. 3. Check the audio cables: Ensure that the audio cables are securely connected to the TV and the external devices, such as a set-top box or DVD player. Try unplugging and re-plugging the cables to ensure a proper connection. 4. Check the audio settings: In the TV menu, navigate to the audio settings and check if any audio settings, such as equalizer or audio balance, are affecting the sound output. Resetting the audio settings to default may help. 5. Broadcasting failure: If none of the above steps resolve the issue, it could be a broadcasting failure. Check if other channels or sources have sound to determine if it is a specific channel or source problem. If the issue persists, it is recommended to refer to the user manual or contact the Strong customer support for further assistance.

To access the electronic programme guide (EPG) on your Strong SRT 24HY4003 television, follow these steps: 1. Press the EPG button on your remote control. This button is usually labeled as "EPG" or "Guide". 2. The EPG interface will appear on the screen. The second bar from the top will display the current date and time. 3. The channel you are currently watching will be highlighted in the list below. To view programme information for a specific channel, use the arrow buttons on your remote control to navigate to the desired channel. 4. To check programmes that will be broadcasted on a future date, scroll up to the date field using the arrow buttons. Use the arrow buttons to select the date you want to check. 5. Press the arrow buttons to scroll through the time slots and view the programme information for each time slot. 6. Press the GREEN button on your remote control to show detailed information about the selected programme. 7. Press the YELLOW button to display the Schedule List. Use the arrow buttons to select an event, and press the RED button to delete an event. 8. Press the BLUE button to display a reminder menu. Use the arrow buttons to select an item and the arrow buttons to change the setting. Press the ENTER button to add the reminder event to the schedule list. 9. Press the MENU button to exit the EPG menu. Note: The availability and functionality of the EPG may vary depending on the broadcast signal and the programme providers.

Yes, the manual of the Strong SRT 24HY4003 is available in English .