11 Ways to Fix Windows PC Booting up With a Black Screen

Learn the common fixes for the black screen of death on Windows PC

Written by Luigi Oppido | Edited by Rain Kengly

Last Updated: March 30, 2024 Fact Checked

Does your PC turn out but there's nothing on the display? This could indicate a problem with your wires, CPU, power supply, or drivers. Here's what to do if your computer turns on but there's no display.

Quick Ways to Fix Black Display on a PC

If your Windows computer boots up but doesn't display anything on the screen, check for damaged or loose wires. For a dedicated graphics card, plug the cable into the HDMI or DisplayPort on the GPU itself, not the motherboard. You can also reset your graphics driver using Windows + Ctrl + Shift + B.

1

Check all wired connections.

Download Article

Make sure your wires are plugged in properly. Check for any loose connections on your computer and monitor, and make sure they're securely fitted.
- If your computer has a dedicated graphics card (non-integrated), make sure you're plugging your monitor into the HDMI or DisplayPort of the actual graphics card. The location will be different from the ports on your computer's motherboard.

2

Try a different cable.

Download Article

Use a new cable. If the wires are plugged in properly, you may not see a display due to a damaged wire. Try using a newer cable.
- If your monitor has both HDMI and DisplayPort ports, try using the alternate port instead.

3

Check the monitor power.

Download Article

Confirm your monitor has power. Most monitors have a light indicator when it's turned on. It may be green when first powered on and stay orange when it's in standby mode. If you don't see any light on your monitor, make sure you're using the correct power cord.

4

Check the monitor source.

Download Article

On most monitors, you can press a physical button to switch sources. Cycle through each source, allowing at least 30 seconds for the change to register.

5

Restart your graphics driver.

Download Article

Press ⊞ Win+Ctrl+⇧ Shift+B. This will restart the graphics driver on your computer.^{[1]
X
Trustworthy Source

Microsoft Support
Technical support and product information from Microsoft.

Go to source} If the screen turns on after using this keyboard, make sure to update your drivers.

6

Hard restart your computer.

Download Article

Press and hold your computer's power button. This will force your computer to turn off. Wait 30 seconds, and then press it again to turn it on.
- Try to avoid turning off your computer this way more than necessary; it can cause issues with startup in the future.

7

Use a different monitor.

Download Article

Try using another monitor or screen. If you're able to connect to the other monitor, the problem lies with your previous monitor rather than your computer.

8

Check all individual components.

Download Article

If you built your PC, check the components. Make sure to ground yourself to avoid damaging your computer with electrostatic discharge.
- Double-check that each component is fitted properly and is in the correct position.

9

Test your power supply.

Download Article

Purchase a power supply tester to check your PC. Your computer may still be off even if the fans and lights are working. Use a power supply tester to make sure your computer is fully powered on.

10

Disconnect all peripherals.

Download Article

Restart your computer with just your monitor plugged in to make sure the problem isn't caused by other devices.

11

Open the BIOS.

Download Article

Check your PC's performance and temperature in the BIOS. This will only work if you can see your screen sometimes. You can enter the BIOS by restarting your computer and pressing your manufacturer's designated key.
- Once you're in the BIOS, select the PC Health Status option. This may also look like System Hardware Monitor or similar. Make sure the CPU temperature is between 95-113℉ (35-45℃).
- If the temperature is above this optimal range, you may need to upgrade your components or move your PC to a different location.