�@
SL-4001
�@
�����p
�@
�S��
- ���q�d�� : 30dB ~ 130dB (����)
- ���q�W�v�d�� : 31.5 ~ 8000Hz
- ��T�� : ��1.5dB (94dB/1KHz)
- �ŦX��ڳW�dIEC61672 Class2
- �����ɶ� : �ֳt : 0.2�� ' �C�t : 1.5��
- A/C�[�v�������q���(Weighting)
- �i����̤j���q�ȥ\��
- ��y/���y�T����X
- �i�~���O����
- Size : 245x80x35mm.
FEATURES
- Large LCD display, easy to read.
- Frequency weighting networks are designed to meet the IEC 61672 CLASS 2.
- A & C weighting networks are conformity to standards.
- Time weighting(FAST & SLOW) dynamic characteristic modes.
- AC/DC output for system expansion.
- Build in adj. VR is available for easy calibration.
- Condenser microphone for high accuracy & long-term stability.
- Max. Hold function for stored the maximum value on display.
- Warning indicator for over and under load.
- LCD display for low power consumption & clear read-out even in bright ambient light condition.
- Used the durable, long-lasting components, including a strong, light weight ABS-plastic housing case.
- Small and light weight design allow one hand operation.
- Low battery indicator.
�@��W��
��� (Display)
- 18mm (0.7") LCD (Liquid Crystal Display), 3 1/2 digits.
�\�� (Function)
- dB (A & C weighting), Time weighting (Fast, Slow), Max. hold, AC output, DC output.
���q�d�� (Measurement Range)
- 3 ranges, 30 to 130 dB, input signal only..
�ѪR�� (Resolution)
- 0.1 dB.
��T�� (Accuracy) (23�� 5 �J)
- Frequency weighting meet IEC 61672 class 2, calibrating input signal on 94 dB ( 31.5 Hz to 8 kHz), the accuracy of frequency weighting is specified as following:
- 31.5 Hz : �� 3.5 dB
- 63 Hz �� 2.5 dB
- 125 Hz �� 2.0 dB
- 250 Hz �� 1.9 dB
- 500 Hz �� 1.9 dB
- 1 K Hz �� 1.4 dB
- 2 K Hz �� 2.6 dB
- 4 K Hz �� 3.6 dB
- 8 K Hz �� 5.6 dB
�[�v���� (Weighting Network)
- Characteristics of A & C.
- A weighting - The characteristic is simulated as "Human Ear Listing" response. Typical, if making the environmental sound level measurement, always select to A weighting.
- C weighting - The characteristic is near the "FLAT" response. Typical, it is suitable for checking the noise of machinery (Q.C. check) & knowing the sound pressure level of the tested equipment.
���q�W�v (Measurement Frequency)
- 31.5 Hz to 8,000 Hz.
�ե��� (Calibrator)
- B & K (Bruel & kjaer), multi-fuction acoustic calibrator, model : 4226.
���J�� (Microphone type)
- Electric condenser microphone.
���J���ؤo (Size of microphone)
- 1/2 inch standard size.
�d���� (Range selector)
- 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step, with over & under range indicating.
�ֺC�ɶ��[�v Time weighting (Fast, Slow)
- Fast - t= 200 ms, Slow - t = 500 ms,
- * "Fast" range is simulated the human ear response time.
- * "Slow" range is easy to get the avg. values of vibration sound level.
�ե� (Calibration)
- * Build in external calibration VR, easy to calibrate by external screw driver.
- * Internal oscillation system, 1 KHz sine wave generator.
��X�T�� (Output Signal)
- AC output - AC 0.5 Vrms corresponding to each range step.
- DC output - DC 0.3 to 1.3 VDC, 10 mV / per dB.
- Output impedance -
600 ohm.
��X�ݤl (Output terminal)
- 3.5 mm dia. phone output terminal is provided for connection with analyzer, level recorder, tape recorder.
�ާ@�ū� (Operating Temp. )
- 0 to 50 �J.
�ާ@�ë� (Operating Humidity)
- Less than 80% R.H.
�q������ (Power Supply)
- 006P DC 9V battery (heavy duty type)
�q���l�� (Power Consumption)
- Approx. DC 6 mA.
���q (Weight)
- 280 g/0.62 LB (including battery).
�ؤo (Size)
- 205 x 80 x 35 mm ( 8.1 x 3.2 x 1.4 inch).
���� (Standard Accessory)
- Instruction manual.................... 1 PC
- Calibration screw driver.............. 1 PC.
���ʪ��� (Optional & accessories Temp. Probe)
- 94 dB sound calibrator, SC-941
- 94 dB/114 dB sound calibrator, SC-942
- Hard carrying case, Model : CA-06.
�@
�@
�@
�@
�@
�@
�@
�@
�@
�@
�@
�@ |
���t�p�B�����p�t�C-�P��ΰe�תA��
|
|