iStyles.com Reviews

Thank you for the review. We're happy to hear that you like the EXO Pioneer Xbox Skin set!

The Skin was designed not to touch the edges on purpose as this ensures the longitivtiy of the Skin. Skins that are cut such that they reach the edges are much harder to apply as there is no margin for error and they may not stay on properly for long - such Skin edges will overhang if not applied with absolute robotic precision, will get caught up with use over time and are more likely to get lifted. This damages the Skin.

There is supposed to be a very tiny gap between each Skin piece and the edge of the surface; the Skin is to be applied such that the "gap" is equal all around the Skin piece (Skin centered on the surface). This gap is hardly visible on a design like EXO Pioneer where it's almost black on black.

We're glad you like the Skin set overall!

We're sorry to hear that you did not like the Black Woodgrain Microsoft Surface Laptop Studio i5 Skin.

This Skin set covers the top outer lid and area around the keyboard as shown in the product photo. The sides and bottom of the laptop are not covered. It is important not to cover the bottom of this laptop as this is where heat is dissipated during operation. If the bottom area is covered, the laptop will not be able to "breath" as well, resulting in higher operating temperatures that can cause reduced performance and shorten electronics lifespan. We recommend using the Skin for styling and scratch protection - when you need to transport the laptop, put it in a padded sleeve or bag. The bottom of the laptop does not require a Skin as it's usually facing a surface (eg, on a table), it does not come into direct contact with this surface (will not get scratched) because of the rubber feet on the bottom and people rarely see this surface as it's either on the table or packed in a bag.

Though we've not seen this issue ourselves, we had one other customer who had issues with the screen not staying completely flat in tablet mode and we're guessing that this may be due to the tight tolerance the lids of some Microsoft Surface Laptop Studio i5 builds. We do have a statement on our product page https://www.istyles.com/skins/computer/microsoft-surface/microsoft-surface-laptop-studio-i5/black-woodgrain-microsoft-surface-laptop-studio-i5-skin-p-522978.html stating that this can happen. Our Skins are ultra thin because of the premium cast vinyl used but such lids are so tight that adding even a thin layer in between prevents the mechanism from folding flat. Unfortunately, the only solution for such lids is to remove one or both outer lid Skins.

Our printers print at high resolutions but the perceived "quality" of the image very much depends on the artwork itself. In this case, the Black Woodgrain design https://www.istyles.com/designs/black-woodgrain-p-83140.html simulates the look of the wood grain. It looks great and is a very popular design. However, we do understand that if you're examining it up close, the design may not appear as brilliant as some of the others in our collection. Black Woodgrain is supposed to be understated and simulate the look of wood, even if it's not real wood.

We're sorry that this did not work out.

We're sorry to hear that you did not like the Solid State Lime DJI Air 2S Skin at https://www.istyles.com/skins/drone/dji-air-2s/solid-state-lime-dji-air-2s-skin-p-500274.html . This Skin set comes with 3 battery Skins and as you purchased an additional battery Skin, there should indeed be 4 in total in your package. Three of the battery Skins (2 from the set and 1 from the extra) are available in separate Skin sheets and the 4th battery Skin is in the middle of the main drone Skin sheet with the other Skin pieces for the top of the drone; many people miss this!

This Skin set is a printed set with a "solid state lime" print. The lime color will improve the visibility of the drone in flight and is much more effective than the standard grey color of the drone surface. Many customers love it. However, as it's a printed color, there is a limit to how "bright" it can become and it will not be as vibrant as fluorescent materials. We no longer have fluorescent Skins but perhaps, another color such as yellow may be more to your liking: https://www.istyles.com/skins/drone/dji-air-2s/solid-state-yellow-dji-air-2s-skin-p-500284.html

We're sorry that this did not work out. Thank you for stopping by anyway.

We're sorry to hear that you did not like the Carbon Dell XPS 15 9560 Skin. This Skin set does fit a Dell XPS 15 9560 but it sounds like you've applied the lid Skin incorrectly if you found the Dell logo not centered. This lid Skin is supposed to be applied such that the logo is centered first before aligning the edges.

We're guessing that you aligned an edge first and then tried to force the rest of the Skin into place. This is incorrect as you're supposed to centre the logo first (not align the Skin edge).

The lid Skin edges are not supposed to be flush against the edge of the lid as such edges will get caught up easily during use and get damaged. There is a very tiny gap between the Skin edge and the laptop lid edge (as shown in the photos below); this makes the Skin edges less vulnerable and ensures that they stay down.

Try gently peeling the Skin off and reapplying, centering the logo first before aligning the edges. If applied correctly, the Skin will look like this and it does fit perfectly:

https://cloud.istyles.com/images/Skins/DX15/DX15_1.jpg
https://cloud.istyles.com/images/Skins/DX15/DX15_2.jpg
https://cloud.istyles.com/images/Skins/DX15/DX15_3.jpg

Thank you for the review. We're glad to hear that you like how the White Marble Amazon Echo 1st Gen Skin set transforms the look of your Amazon Echo such that it looks like real carved marble.

We're sorry to hear that you had an issue with the bottom Skin piece. Every Skin piece should fit as they're precision cut and the layout was extensively tested but we're guessing that you might have accidentally stretched this piece when applying it. The Skins are made of high quality cast vinyl that is flexible enough to wrap around many surfaces and is less prone to shrinkage, but the material can stretch if pulled too hard. This piece is rather long and if it was stretched by just a little as it was wrapped around, it may result in the Skin being slightly too long as you've experienced.

The "fix", rather than a fold, is to cut the end of this piece slightly. Skins can be cut using a penknife or scissors. If you gently peel off the edge that's too long and cut it off, it'll look much cleaner.

Please feel free to contact us at support@istyles.com if you have any further queries or need assistance.

Thank you for the review. We're happy to hear that you like the Kraken Xbox Series X and controller Skin sets.

The premium cast vinyl used for the Skins allows the material to bend easily around a single axle surface but things get a little more complicated with rounded 3D surfaces; it's like trying to gift wrap a ball with paper. The material is however flexible enough to go on slightly rounded surfaces but when it's not possible to do so, we make incisions to help. Extra incisions are not necessary for the front controller Skin as the Skin can be gently massaged into place even though this area is rounded, but we're glad you made it work.

We've sent you a matching wallpaper via email. We hope you like the matching look!

We're sorry to hear that the custom iPad Pro 12.9-inch Magic Keyboard Skin was not sticking well to your Magic Keyboard. These Skins will stick and generally outlast the lifespan of the device but it is a little more complicated because of the Magic Keyboard's surface.

Our Skins come with a balanced adhesive that allows for easy application and goo-free removal. It is important that the Skin stays down and it is just as important that the Skin can be subsequently removed without damage to the device. For example, if the Skin was "super glued" to the device, it will stick well no matter the condition of the surface but it will not be removable.

The Skin adhesive does stick properly based on feedback from our other customers, but it is important to clean the device surface properly prior to Skin application. Magic Keyboards in particular have to be cleaned very well prior to Skin application because as it is, the rubbery like material on the cover's surface makes it difficult for anything adhesive to stay on, and this same material also appears to be a magnet for human oil (tends to become more slippery with use); if it's not perfectly clean, the Skin will not be able to stick to to such a surface.

Likewise, environmental factors, such as constant abrasion against the edge of the Skin, which is a similar action to peeling the Skin, will inevitably result in the edge lifting. In addition, incorrect Skin positioning such that an edge overhangs the device edge will make these edges more vulnerable to peeling or damage. It's also possible the Skin adhesive might have been damaged during the Skin application process if you reapplied the Skin (peeling off and sticking again) too many times when positioning a piece.

We can get another custom iPad Pro 12.9-inch Magic Keyboard Skin made for you so that you can give this another go, and you just have to cover the ship cost to get the new package to you. If you would like to go for this replacement, please contact us at https://support.istyles.com/hc/en-us/sections/201764305-Contact-Us and we will set this up for you.