1.) Antique 24" jointer block plane, (Sold).
2.) Sargent #609 Kenewa jack plane, (Sold). |
Stanley #29 transitional fore plane, with L. Bailey's patent Dec. 24, 1867 (Sold). |
Stanley #26 transitional jack plane, (Sold). |
Antique molding planes, $10. each. (Some are sold) |
1.) Richard Ibbotson, Sheffield, 1 3/4" concave, $35.
2.) Alfred Ridge & Sons Sheffield, 1 3/4" round, $35.
3.) R. Atwill Plymouth, 1 5/8" curved bottom, (Sold)
4.) Marples & Son, Hibernia, 2" flat bottom, $35. |
1.) Fulton Warranted low angle block plane with knuckle jointed lever cap small repair, asking $45.
2.) Stanley #18 low angle block plane with Patented Dec. 28, 1886 knuckle jointed lever cap, (Sold). |
1.) #113 Stanley 1921 Circular plane, (Sold).
2.) #113 Stanley 1936 Circular plane, (Sold).
3.) #113 Stanley 1879 Circular plane, asking $120. |
1.) #11 Stanley 1909 Belt Maker's plane, $100.
2.) #11 Stanley 1905 Belt Maker's plane, $120. |
1.) #71 Stanley router plane, (Sold)
2.) #71 Stanley router plane, (Sold). |
1.) #607 Stanley Bed Rock Jointer plane, (Sold).
2.) #7 Stanley Bailey 1910 Jointer plane, $280.
3.) #7C Stanley Bailey 1960 Jointer plane, (Sold). |
1.) #75 Stanley 1936 bullnose Rabbeting (Sold)
2.) #78 Stanley U.S.A. Rabbet & Filletster, $35.
3.) #78 Stanley Canada Rabbet & Filletster, $35.
4.) #180 Stanley Rabbet plane, 1886 (Sold)
5.) #190 Stanley Rabbet plane with box, (Sold). |
1.) #45 Stanley 1896 molding plane, (Sold) with box of cutters.
2.) #45 Stanley 1922 molding plane, (Sold) with box of cutters.
|
Antique Buck Brothers cast iron 16" shooting plane, weighs 9 lbs, (Sold) |
1.) #605 Stanley Bed Rock 1910 Jack plane, (Sold)
2.) #606 Stanley Bed Rock 1910 Fore plane (Sold)
3.) #607 Stanley Bed Rock 1910Jointerplane (Sold) |
Set of two antique tongue & groove cast iron hand planes, (Sold). |
Antique bronze or brass chariot plane 8 3/4" x 2 3/8" with a 2" McPherson Brothers blade, (Sold). (Sold to one of Antiques Roadshow appraiser) |
1.) #8c Stanley Bailey Jointer plane, (Sold).
2.) #6c Stanley Bailey Fore plane, (Sold).
3.) #5c Stanley Bailey 1910 Jack plane, (Sold). |
1.) #4 Stanley Handyman $20. smooth plane.
2.) #4 Stanley Handyman smooth plane (Sold).
3.) #4 Footprint made in England $20. smooth plane. |
Union MFG. Co. #6C Fore plane, Made in USA, corrugated bottoms, (Sold). |
Stanley #10 1/2 carriage maker's rabbet plane, was repaired, still a good user, has original blade in good condition, (Sold). |
Antique brass or bronze 1" bull nose chariot plane, missing blade, asking $75. (Missing Blade) |
1.) 1922 Stanley sweetheart #78 duplex rabbet & filletster plane, (Sold).
2.) 1922 Stanley sweetheart #192 rabbet plane (Sold) |
1.) 1867 Stanley #3 smooth plane, asking $140.
2.) 1910 Stanley Bailey #4c smooth plane, (Sold).
3.) Stanley Bailey #4 smooth plane, asking $60. |
Stanley #194 chamfer plane, no blades, asking $45. |
1876 Leonard Bailey's #3 Victor smooth plane with cast iron handle, short rosewood front knob instead of the steel one, blade has Bailey's Apr. 23, 1867 & Dec. 12, 1876 patent dates on it. (Sold). |
Stanley #20 circular compass plane, asking $180. |
Antique 1854 D. Kimberley & Sons plough plane, Made in England, with patent #19943, asking $75. |
Antique original filletster bed part for Stanley Miller's patent adjustable plow planes No. 41 or 42, (Sold) (TOOLS OF THE TRADES) |
Stanley #49 tongue & groove plane with swing fence, (Sold). |
1.) Select Planer razor blade plane, $20.
2.) 3 planers in one razor blade plane, $20.
3.) Acme Razor blade plane, $20. |
1896 Stanley #98 & #99 left & right side rabbet planes, patent Jan. 29, 1895, asking $185. for the set. |
1.) Stanley #75 bullnose plane, (Sold).
2.) 1879 Stanley #75 bullnose plane, asking $75.
3.) Embossed name bullnose plane, (Sold). |
1.) 1891 Stanley #102 block plane, $35.
2.)Vintage Stanley #101 instrument making plane with 1" blade, pocket block plane, asking $45. |
Vintage Craftsman No.3740BL cast aluminum planes 4-Edge blades, Made in USA, asking $30. each. |
#12 Stanley veneer scraper plane, asking $125 .
#12 Stanley veneer scraper plane, asking $100 .
#81 Stanley 1909 nickel plated cabinet scraper (Sold) |
#71 Stanley 1884 router plane with March 4, 1884 patent date, asking $175. |
1.) Stanley #24 smooth plane, 2" cutter, asking $65.
2.) Stanley #122 Liberty Bell smooth plane, 1 3/4" cutter, 1876-1918, asking $75. |
Antique 1879-94 Marten Doscher New York, screw arm plough plane, asking $120. |
1.) Stanley 1897 low angle $85. block plane
2.) Millers Falls #16 low angle $65. block plane
3.) Stanley low angle $65. block plane |
1.) Record #05 Jack plane, Made in England, $85.
2.) #5 Stanley Bailey Jack plane, (Sold).
3.) #5c Victory Jack plane, made in Canada, (Sold). |
1.) #4 1/2 Stanley Bailey 1910 smooth plane (Sold)
2.) #5 1/2 Stanley Bailey 1930 Jack plane, $160.
3.) #5 1/2c Stanley Bailey 1910 Jack plane, $160. |
1.) Ohio Tool Co. USA #O180 double ended block plane, asking $30.
2.) Woden England #W130 double ended block plane, asking $30. |
Vintage 7" Union Mfg. Co. squirrel tail low angle plane, asking $120. |
1923 Stanley #45 molding plane, with box & cutters, (Sold). |
1.) Wards Master low angle block plane (Sold)
2.) Millers Falls #56 low angle block plane, (Sold)
3.) Record 060 1/2 low angle block plane $50. |
1.) Stanley #220 block plane, asking $25.
2.) Stanley #120 block plane, asking $25. |
Henry Slater 1873-1877 Meredith St. Clerkenwell London, infill 1 1/2" shoulder plane with rosewood wedge, weighs 3 lbs. (Sold). |
Two Shelton No. 05, made in USA, patent #1914609, asking $40. each. (One Sold). |
1.) #82 Stanley 1909 cabinet scraper, (Sold).
2.) #82 Stanley 1942 cabinet scraper, asking $50.
3.) #70 Stanley 1950 box scraper, (Sold). |
1.) The A. E. Bennett adjustable scraper Patent Jan 5 1909, Bennett Specialty Mfg. Co. Buffalo N.Y. $25.
2.) E.C. Stearns & Co. scraper, $25. (Crack handle)
3.) #181 L.S. Starrett Co. 1910, scraper, asking $30. |
1856 E.C. Atkins & Co. Indianapolis Ind. scraper with rams horn style handle, (Sold) |
Stanley #386 jointer plane fence, Pat'd 4-1-1913, The adjustable fence attaches to a jack, fore or jointer plane for obtaining accurate angles from 30* to 90*. (Sold). |
1.) Stanley #66 hand beader, missing clamp, patent Feb. 9, 1886 on handle, asking $40.
2.) Stanley #66 hand beader with one cutter, patent Feb. 9, 1886 on base, asking $75.
3.) Stanley #66 hand beader with one cutter, and fence, nickle plated, asking $65. |
1922 Stanley #83 cabinet scraper with adjustable back roller guide, a 3 7/8" wide S.W. scraper blade, asking $75. |
Log House & Timber Framing Tools
Antique & vintage tools used to build log houses & timber framing buildings. Most of these items sold, but there are more throughout the website for sale.
|
Antique Adze
Adze handles are $30. each with purchase of an adze. |
Antique Railway ties 4 1/2" adze with a 1" dia. Pole, and a 34" handle, it weighs 7 lbs. (Sold). |
Antique Hills Galt lipped pole adze, (Sold) |
Antique T. H. Witherby pole adze (Sold) |
Barco FSS #5100-355D USA Pulaski axe-adze (Sold) |
Vintage Garant 5 lb. mattock brush axe-adze, $40. |
Mann Lewistown PA. American Pulaski axe-adze, (Sold). |
1837 L. & I.J. White 4 1/4" pole adze, asking $120. |
True Temper Flint Edge 4" pole adze, (Sold). |
1832 D.R. Barton 4 1/4" pole adze, $120. |
Stelletto 4" pole adze, asking $85. |
Keen Kutter 4" pole adze, asking $100. |
No name antique 4" pole adze, $60. |
J. Fowler Co. St. John N.B. 4 1/2" lipped adze (Sold). |
Antique no-name 4" lipped pole adze, asking $120. |
Unledgeable name 4" pole adze, (Sold). |
|
|
|
|
1) Antique 2 1/2" coopers adze, $40. (Sold).
2) Antique 3 1/4" coopers adze, $35. (Sold). |
1922 William Hunt's, Brades Co. #1513 solid steel 4" hewing adze, it weighs 3 1/4 lbs. (Sold) |
3 1/2" Curved scoop gutter adze, (Sold). |
#3 Xlnt Quality 3 3/4" hewing adze, asking $65. |
3 True Temper Flint Edge Kelly Works Pulaski axe-adze, 4 3/8" edge, weighs 4 lbs. each, asking $75. each. (One is Sold) |
Hand forged 3 1/2" curved scoop log adze, asking $30. |
Modified 2 1/4" curved water trough adze, (Sold). |
1.) Antique 4 3/4" hewing adze, it weighs 4 lbs. (Sold).
2.) Antique 4 1/4" hewing adze, it weighs 3 1/2 lbs. Sharp and ready to work, (Sold). |
Hand forged curved carving adse 1 1/2" & 3" wide blades, asking $40. each. (Sold) |
|
|
|
|
1876 Klein Logan & Co. Pittsburg, PA. 14" cutting edge froe, with 20" handle, asking $185. |
Antique Froe with unledgeable name, 10" cutting edge, no handle, asking $120. |
Antique hand forged Froe with 12" cutting edge, no handle, asking $85. |
1.) Iron City 15" cutting edge froe, weighs 5 lbs. $225.
2.)1868 Iron City (in Star) Warranted Solid Steel, 12 1/2" cutting edge froe, weighs 3 lbs. asking $175. |
Antique hand forged curved froe with 10" cutting edge original handle in rough shape, (Sold). |
Newer Lee Valley shingle and riving Froe 15" x 2" blade, 16" handle, (Sold). |
 |
|
|
|
|
|
Axe Files
Four 8" Nicholson Axe files, asking $10. each. |
1) 1865 Goosewing Bearded 10" Hewing Axe, with makers emblem, (Sold).
2) 1805 Goosewing Bearded 9" Hewing Axe, (Sold) |
Antique 7 1/2" Medieval Horseman's Hammer Head Broad Axe, (Sold). |
Antique 2" carpenters strap hatchet, asking $75. |
1828 Eagle Edge Tool Co. 311B No. 2 with an eagle embossed in it, 4" broad axe, (Sold). |
Antique Rusca Montana M in star, goosewing 10 1/4" hewing axe with 45" original handle, asking $320. |
1) Vintage 1 3/4" carving hatchet with hand made handle, (Sold).
2) Antique 1 3/4" L.A. Sayre Co. Newark N. J. #140 hatchet, (Sold).
3) Antique 2" detail carving hatchet, (Sold). |
1839-1882 W.M. Beatty & Son, Chester PA. 13 1/4" Hewing axe, (Sold). |
1) 6" Warnock & Co. Galt, Hewing axe, (Sold).
2) 10 3/4" Warnock & Co. Galt, Hewing axe, with new 31 1/2" bent offset handle, (Sold). |
1840 S. & W. Hedge broad axe 7 1/4" x 8", weighs 4 1/2 lbs. (Sold). |
Huge 5" x 8" Tasmanian 5 1/4 lb. axe head, $160. |
1.) 4 3/4" True Temper Welland Vale Fireman's 4 1/2 lbs axe head, (Sold).
2.) 4 3/4" Collins & Co. Hartford Legitimus Fireman's axe, Made in USA. embossed crown emblem, (Sold). |
3" hand forged tomahawk axe heads forged out of high carbon old rasp files, weighs 1 lb. (Sold). |
1) Welland Vale Co. 3 3/8" Lion Brand hatchet with hand carved deer foot handle, (Sold).
2) Welland 2 3/4" hatchet with hand carved deer foot handle, (Sold). |
Walters Fireman's axe, 5" x 11" weighs about 6 lbs. Asking $160. |
Garantie Ger Forge 4" french broad axe with log stamp end, $160. |
1.) Antique Rich-Con embossed 4 3/4" hewing axe, Richards & Conover Hardware Co, (Sold).
2.) Antique Rich-Con embossed 4 1/4" hewing axe, Richards & Conover Hardware Co, (Sold).
3.) Rich-Con embossed 4" hewing axe, (Sold). |
1.) Antique 1909 Eclipse 4 3/4" hewing axe, (Sold).
2.) Antique DCH CleanCut embossed 4" hewing axe, Dunham Carrigan & Hayden, (Sold). |
1.) I. H. Co. embossed "Our Own" 5" hewing axe, weighs 2 lbs. asking $120.
2.) Olympic embossed 5 1/4" hewing axe, hand forged natural gas temper, 3 lbs. (Sold). |
1.) Antique Belknap Bluegrass, Louisville 4 1/2" hewing axe, (back side is pitted on this one). $85.
2.) Antique 1832 D.R. Barton, Rochester NY. 5 3/4" hewing axe, original bent handle, (Sold). |
1.) Plumb Anchor Brand w/anchor, 5 1/2" hewing axe, (Sold).
2.) Antique The Acme Co. 4" hewing axe, (Sold). |
1.) Vaughan & Bushnell V&B Supersteel 3 1/4" hammerhead broad axe hatchet, weighs 1 lb. $60.
2.) Salesman sample 2 1/4" x 3 1/4" broad axe hatchet, weighs 1/4 lb. Asking $65.
3.) 1869 C.Hammond, Philadelphia 3" hammerhead broad axe #1 hatchet, weighs 1 lb. $75. (With handle) |
6" hewing axe Weighs about 3 lbs. asking $65. |
Vintage Stanley Bell System B Lineman's 4 1/4" broad axe with the 1-inch square bolt nut hole, it weighs about 4 lbs. asking $95. |
1) Collins & Co. Hartford Conn.,5 3/4" hewing axe, 3 1/2 lbs. (Sold)
2) Northern King, 5 1/2" hewing axe, 3 lbs. (Sold). |
1) OVB (our very best) Hibbards Spencer Bartlett & Co. 4 1/2" hewing axe, (Sold).
2) Antique Hibbard, 4 1/2" hewing axe, (Sold).
3) True Temper Flint Edge, 4 1/2" hewing axe, (Sold). |
1.) Briar Edge service tools 4 3/8" hewing axe (Sold).
2.) Kelly Hand Made 4" hewing axe (Sold).
3.) 1927 Craftsman 4 3/4" hewing axe, (Sold). |
1) Farwell Ozmun Kirk & Co. 5" hewing axe, weighs 2 1/4 lbs. $95.
2) A. A. & Tool Co. Gassport Pa. 2 1/2 lbs. 5" hewing axe, $95. |
Loggers 4" sledge hammer head 5 lb. axe, (Sold). |
1) Vintage 5" Iltis Ox-Head axe, asking $185. (Sold).
2) Vintage 4 1/4" Iltis Ox-Head axe, asking $125. 3) Vintage 4 1/8" Iltis Ox-Head axe, (Sold). |
Antique embossed "U.S.M.C. Scrap Hatchet" 3" blade, measures about 7" long all cast iron, weighs 2 lbs. Asking $55. |
10 1/2" Warnock & Co. Galt, hewing axe, it weighs about 7 lbs. with a nice 29" handle, asking $240. |
1) W. Gilpin Wedges Mills 5" broad axe, (Sold)..
2) Blodgett Tool Co. 4" broad axe, (Sold). |
Hult Bruks, Hudson Bay style 4 1/4" axe, weighs only 2 1/2 Lbs. Made in Sweden, (Sold). |
Vintage U.S.A. Council Tools El Lobo, 4" hatchet, 2 lb. head, with original handle, (Sold). |
1) 4 1/2" Fulton Tool Co. hewing axe, (Sold).
2) 5" CPR stamped hewing axe, (Sold).
3) 5 1/4" Collins hewing axe, (Sold). |
3 1/2" Billnäs 12.3 Finnish Finland axe head, it weighs 2 1/4 lbs. (Sold). |
12 1/4" Council broad axe, it weighs about 7 lbs (Sold). |
1.) S.J. Crown logo 4" axe, Made in England, it weighs 2 1/2 lbs. (Sold).
2.) Garant 4" axe, it weighs 1 3/4 lb. asking $25.
3.) Walters 3 7/8" axe, weighs 2 1/2 lbs. asking $65. |
Antique W. Lutze 3" x 7 1/2" splitting axe, weighs 4 3/4 lbs. (Sold) |
Welland Vale True Temper ice harvesting axe head, asking $120. |
1) Gifford Wood Co. #605 ice harvesting axe, (Sold).
2) Gifford Wood Co. #612 ice harvesting axe, $120.
3) Gifford Wood Co. #611 ice harvesting axe, $100. |
Alce (moose) 5" blade 5 lbs.axe head, (Sold). |
1) Antique 3 1/4" half hatchet, (Sold).
2) 1904-1930 embossed Kelly Axe & Tool Co. Charleston W. Va. half hatchet, (Sold).
3) Underhill Edge Tool Co. 2 1/2" half hatchet, (Sold). |
1) Embossed Vaughan & Bushnell Mfg. Co. Chicago, Uncle Sam ,4 3/8" x 6" hewing axe, asking $120.
2) Westline 4 1/2" x 6" hewing axe, weighs 2 1/4 lbs. hole on back, (Sold). |
Shapleigh Hardware Co. Diamond Edge “For Sportsmen” Mallard DUCK Hatchet/Axe (Sold) |
1.) Plumb 5" hewing axe (Sold).
2.) Vaughan, made in USA, 4 1/4" hewing axe, (Sold). |
1.) Hewiing axe 4 3/8" x 5 1/2", weighs 1 3/4 lbs. $55.
2.) Antique Walters hewing axe 4 3/8" x 6 1/4", weighs 2 1/2 lbs. asking $85.
3.) Hewing axe 5 1/2" x 7", weighs 2 1/4 lbs. (Sold). |
Antique Phoenix 3 1/2" half hatchet, has a few chips in hammer head, weighs about 1 1/2 lbs. Asking $40. |
1.) 3 3/4" hammerhead broad axe hatchet, (Sold).
2.) 4" hammerhead broad axe hatchet, (Sold).
3.) 3 1/2" Winchester #2 broadaxe, (Sold). |
1.) Acme 3 1/2" half hatchet, 1 1/2 lb. (Sold).
2.) True Temper Flint Edge 3 1/2" half hatchet, (Sold).
3.) True Temper No. TFH 3 1/2" half hatchet (Sold).
4.) Super Duty USA 3 1/2" half hatchet, 1 1/2 lb. (Sold)
5.) Plumb 3 1/8" half hatchet, 1 lb. (Sold). |
1.) M 3 1/2 by Mann Edge Tool Co. Connecticut pattern 4 3/4" axe head, 3 1/2 lbs. $60.
2.) Clearcut Geo Worthington Co. Cleveland Ohio, 4 1/2" axe, 3 lbs. (Sold).
3.) Lion Brand by Welland Vale Co. 4 3/8" axe head, 3 1/4 lbs. (Sold). |
Antique Hand Made Drop Forged, 2 3/4" x 7" Bow-Tie mason's axe, asking $120. |
1889 Walters 9" hewing axe, from Hull Quebec, with whale tail blade, (Sold). |
1.) True Temper Tommy Axe for chopping, driving, and pulling3 3/4" x 6 1/2" broad axe with claw, weighs 1 3/4 lbs. (Sold).
2.) Collins Red Seal, 4" x 6 1/4" broad axe with claw, weighs 1 1/2 lbs. asking $85. |
N.O.S. Vintage adjustable swivel-axe, Patt Brothers Company, Willoughby Ohio, 3 3/8" edge, (Sold). |
1.) 2 1/2" No-name antique hatchet, 1 lb. $25.
2.) 2 3/4" Ushark ? hatchet, 1 1/2 lbs. $35.
3.) 2 5/8" Elwell, made in England, 1 1/4 lbs. (Sold). |
WW11 embossed 1944 U.S. Plumb 3" axe head, hatchet for world war 2 military back packs, weighs 1 1/4 lb. (Sold). |
1.) J. Hatton 6 1/2" x 6 3/8", 3 lbs. hewing axe, (Sold).
2.) Cast Steel 6 1/2" x 6 1/2" weighs 2 3/4 lbs. Hewing axe, asking $85.
3.) Unledgeable name 5" x 6", weighs 2 1/4 lbs. Hewing axe, asking $65. |
1.) Winchester trade mark, 5" x 6 3/8", phantom bevels hewing axe, weighs 2 3/4 lbs. asking $160.
2.) Phantom bevels 4" x 5 1/2", weighs 1 1/2 lbs. (Sold) |
1.) Hewiing axe 4 3/8" x 5 1/2", weighs 1 1/2 lbs. (Sold).
2.) Hewing axe 4 1/4" x 5 1/4", weighs 1 1/2 lbs. (Sold).
3.) Hewing axe 4" x 4 1/2", weighs 1 1/4 lbs. $55. |
1.) No-name 5" x 6", weighs 2 1/4 lbs. Hewing axe, asking $65.
2.) True Temper No. TB2 4 1/2" x 6", weighs 2 lbs. (Sold). |
1.) Morticing hewing axe 3 3/4" x 6", weighs 2 lbs. (Sold)
2.) Plumb 4" x 5 1/2" broad axe 1 1/2 lbs. (Sold). |
1.) Walters 2 1/2" x 4 3/4" kids hatchet, weighs 1 lb. (Sold).
2.) Walters Black Diamond 2 3/4" x 4 1/4" kids hatchet, weighs 1 lb. asking $55. |
1863-1926 Campbells XXX Tools St. John N.B. (New Brunswick), 3 1/2" x 8 3/8" double bit axe, (Sold). |
1.) Walters 4" axe, engraved D.T.C. (Sold).
2.)Welland Vale True Temper Black Prince, 4" axe, poor markings, asking $45. |
Welland Vale 4" x 6 1/4", 2 1/2 lbs. $45. |
1937 Sager Chemical Axe, 4 1/2" x 10 3/8" double bit axe head, weighs 4 1/4 lbs. (Sold). |
1.) True Temper Kelly Perfect, 4 3/4" x 9 7/8" Phantom Bevels, weighs 3 1/2 lbs. (Sold).
2.) True Temper Red Warrior Kelly Works, 4 7/8" x 10" weighs 4 lbs. Asking $170. |
Winchester, canoe pattern double bit axe head, 4 3/8" x 8 5/8" ,weighs 3 3/4 lbs. (Sold). |
1.) Walters Black Diamond, 4 1/2" x 9", (Sold).
2.) Walters made in Canada, 4 3/4" x 10 1/4", weighs 4 3/4 lbs. (Sold). |
1.) Plumb phantom bevels, 4 3/8" x 9 5/8", (Sold).
2.) Plumb phantom bevels, 4 1/4" x 9 1/2", (Sold). |
Small Tru-Test 3 1/2" x 8 1/4", weighs 2 3/4 lbs. Pitted on back side, (Sold). |
Gransfors Bruks, GAB with crown in a circle, Made in Sweden, 5" x 10", weighs 4 lbs. Asking $260. |
1.) Collins 4 3/4" x 10", 3 1/4 lbs. (Sold)
2.) Collins 4 1/2" x 9 3/4", weighs 3 lbs. (Sold). |
Zenith Marshall-Wells 3 1/2" x 10 1/2", weighs 4 1/4 lbs. (Sold) |
1.) True Temper Kelly Perfect, 4 3/4" x 9 1/2" Phantom Bevels, weighs 3 1/2 lbs. Asking $160.
2.) True Temper Kelly Works, 4 7/8" x 10" Phantom Bevels, weighs 4 lbs. Asking $140. |
1.) Sager Chemical 193? Axe, 4 7/8" x 10", weighs 4 1/2 lbs. Asking $130.
2.) Sager Chemical 1929 Axe, 5" x 9 1/4", weighs 3 3/4 lbs. Asking $140. |
Red Knight 4 1/2" x 11 1/8", weighs 3 3/4 lbs. Asking $180. |
1.) Sager Warren Axe & Tool Co. Warren PA. 5" x 10 1/8", weighs 3 3/4 lbs. Asking $160.
2.) Sager Warren Axe & Tool Co. Warren PA. 4 5/8" x 11 1/8", weighs 3 1/2 lbs. Asking $170. |
1.) Plumb 5 1/4" x 10", weighs 4 lbs. Asking $100.
2.) Plumb 4 5/8" x 11 1/8", weighs 4 lbs. Asking $130. |
True Temper Kelly Works Red Warrior, 4 3/4" x 9 7/8", weighs 4 lbs. Asking $160. |
1.) Kelly Axe & Tool Co. West VA. True Temper, 4 1/2" x 10 3/4", weighs 3 1/2 lbs. Asking $170.
2.) Kelly Axe & Tool Co. True Temper Zenith Marshall Wells, 4 3/8" x 10 3/4", weighs 3 1/2 lbs. Asking $180. |
1.) True Temper Flint Edge Kelly Works, canoe pattern axe head, 4 3/4" x 10 1/2" ,weighs 3 1/2 lbs. $145.
2.) True Temper Flint Edge Kelly Works, swamping pattern axe head, 4 1/2" x 11" ,weighs 3 1/2 lbs. $160. |
Cayuga Barker Rose & Kimball Elmira, NY. with lightly embossed indian head, 4 5/8" x 9 1/2", weighs 3 1/2 lbs. Asking $180. |
True Temper Kelly Works Stilletto 4 3/4" x 11 1/4", weighs 4 lbs. 35" handle, asking $180. |
Keen Kutter 4 3/4" x 9 1/2", weighs 3 1/2 lbs. $120. |
Antique 5 5/8" with embossed emblem, has a crack on top of head, weighs 3 1/4 lbs.$45. |
Walters Hull 4 1/4" x 8 3/8", with 29" handle, (Sold). |
1.) Sager Warren Axe & Tool Co. Warren PA. 4 1/2" x 10 3/4", weighs 3 1/4 lbs. asking $160.
2.) Sager Chemical Axe 4" x 10 1/2", weighs 3 3/4 lbs. Asking $125. |
1.) Vintage Craftsman Axe, 4 3/4" x 10", weighs 3 3/4 lbs. Asking $90.
2.) Stamped #1109 Axe, 4 3/4" x 9 5/8", weighs 4 lbs. (Sold). |
1.) 5" Collins Homestead Jersey pattern 3 1/2 lb.axe head, Asking $180.
2.) 4" Council Tool Co. Wananish NC. 1884 Jersey pattern 3 1/4 lb. axe head. Asking $160. |
1.) Collins Homestead 5" x 6 1/2" Jersey pattern 3 1/4 lb. axe head, Asking $140.
2.) No-Name 4 1/2" x 6 1/2" Jersey pattern 3 1/4 lbs. axe head, asking $120. |
Plumb Rock Away pattern 4 1/2" x 7", weighs 3 1/2 lbs. Asking $120. |
Walters 5" x 6 3/4" Jersey pattern, 3 1/2 lbs. $220. |
1.) Belknap Bluegrass 5 1/2" Jersey pattern 3 lb.axe head, (Sold).
2.) Red Warrior True Temper Kelly Works 5 1/2" Jersey pattern 3 lb. Axe head, (Sold). |
Knott Klipper Warranted Mann Lewistown Pa. 5" Jersey pattern 4 lb. axe head, (Sold). |
Antique No. 210 Council 9 1/2" double edge brush hook axe, (Sold). |
1.) 1857-1871 Taylor's Old Hickory, Waterloo, Que. 4" axe head, weighs 2 1/2 lbs. (Sold).
2.) Walter's Black Diamond, 3 1/4" hudson bay style axe head, weighs 2 lbs. (Sold). |
Antique pitted ship wreck find 4 5/8" Jersey pattern 4 1/2 lb. axe head, (Sold). |
Howlands Samson Quality 4 1/2" axe, H. Howland, Sons & Co. Limited Toronto, (Sold). |
1.) S (crown) J UK 4 1/4" axe head, 3 1/2 lbs. $45.
2.) Walters 4 3/8" x 7" axe head, 3 lbs. (Sold).
3.) Walters 3 3/4" axe head, 2 lbs. (Sold). |
Antique #55 Revollier 4 1/4" x 7", weighs 1 1/2 lbs. Axe head, $85.
|
1930 Dunlap Tasmanian axe with phantom bevels, 4 3/4" x 8", it weighs about 3 3/4 lbs. Asking $95. |
Vintage 4" Iltis Ox-Head axe, weighs 2 lbs. $75. |
1.) True Temper Dynamic Kelly Works axe with phantom bevels, 4 1/2" x 7 1/4" weighs 3 3/4 lbs. $85.
2.) Collins Tasmanian axe, 4 1/2" x 7 3/4", weighs 4 1/2 lbs. asking $85. |
1.) Vintage Collins 12 " x 2 1/4" brush axe with 28" handle, asking $85.
2.) Antique embossed The Collins Company 12 " x 1 3/4" brush axe with no handle, asking $95. |
Antique 12" x 2 1/2" brush axe with 30" handle, $75. |
M. & W. Canada Black Hawk 4" throwing tomahawk axe, (Sold).
|
13" T. Foster (Dundas Axe Works) Pembroke Ontario, 1850 hewing axe, weighs 8 1/4 lbs. asking $280. |
13 1/2" S. Washburn (Chaudiere Island Axe Factory) Chaudiere Island, Hull, Que. 1854 hewing axe, weighs 10 lbs. asking $320. |
11 3/8" No-name hewing axe, weighs 6 1/4 lbs. asking $100. |
11 3/4" Drough & Co. hewing axe with bentwood handle, weighs 7 1/4 lbs. (Sold). |
12" D.R. Barton 1832 hewing axe, weighs 6 1/2 lbs. asking $300. |
9 1/2" No-name hewing axe, 5 1/2 lbs. asking $160. |
1878 Collins & Co. Hartford, Cast Steel Warranted, Legitimus with the Crown, Arm & Hammer logo, 13 1/2" hewing axe, with 28" bent wood handle, axe head weighs about 7 1/2 lbs. asking $320. |
12" Bangor hewing axe, weighs 6 1/2 lbs. $160. |
10 3/4" Warnock & Co. Galt, hewing axe, it weighs about 7 lbs. (Sold). |
|
|
13" unlegible name hewing axe, weighs 9 lbs. $120. |
12" no-name hewing axe, weighs 8 lbs. $100. |
1.) 4 1/2" Ardex hewing axe with Canada maple leaf logo, asking $85. (Sold).
2.) 3 3/4" Vaughan broad axe, (Sold). |
NOS 1940's Burgess Tools Limited, Ottawa Canada, BT trade mark, 3 3/4" Challenger Axe, original label, weighs 2 1/2 lbs. takes a Tomahawk style handle, they are a good throwing axe, asking $85. each (Only 2 left for sale) |
Antique 2" Hatchet with screwdriver, 8 12" long (Sold). |
Antique mountain climbing walking stick ice pick axe, 38 1/2" long, 2 3/8" edge, it weighs 2 1/4 lbs. (Sold). |
 1.) The Bridgeport Hardware Mfg. Corp. USA crate opening tool, Pat. Sept. 29, 1908, asking $55.
2.) Bridgeport Hdwe Mfg. Co. #120 Seminole crate opening tool hachet, asking $75.
|
Swordfish Brand 2 3/4" crate hachet, prybar, hammer, nail puller, Made in China, asking $45. |
Snow & Nealley Penobscot Bay Kindling Axe, Est. 1864, like new with leather sheath, 17" hickory handle, 4" blade, asking $165. |
Chopper 1 USA spring loaded splitting maul 5" axe, weighs 6 1/2 lbs. springs are in good working condition, asking $45. |
Ames USA sport axe backpack hatchet, Made by Plumb, weighs only 1 lb. $40. |
Russel Jennings Auger Bits Set
Antique The Russel Jennings Mfg. Co.13 spur auger bits set 32½ Qrs in a 3 tiered oak box, Pat'd Jan. 30, 1855 (Sold). |
Irwin Auger Bits Set
Vintage Irwin 13 auger bits set, (Sold). |
Square Tang Auger Bits
Square tang auger bits, $2. each. |
Hardware Store Bits Display
Vintage hardware store display case for Ace drill bits from 1/2" to 1/16", it measures 26" x 2 1/2" x 9" Made with finger joints, solid oak with hinged lid, (Sold). |
1952 Irwin Auger Bits Set
1952 Irwin stock No. AM 9 auger bits and 1 screw driver bit set, in oak wood box with manual, The Irwin Auger bit Co. Wilmington, Ohio, (Sold). |
Stanley #49 Auger Bit Stop
Stanley No. 49 adjustable auger bit stop gauge, (Sold). |
Auger Bits with Tool Roll
Vintage mixed set of 15 hand brace auger bits with canvas tool roll, (Sold). |
Antique Bat Wing Bits
Antique 1800's bat wing bits, some have makers names on them: Mathieson, Henry Boker, J. Howarth, J. Tyzack & Son, etc. Asking $10. each. (Some sold). |
Wood Mortiser
Antique Grand Rapids Sash Pulley Co. bat wing bits wood mortiser for window sash pullies and locks. (Sold). |
Tapered Auger Bit Reamers
Two antique tapered auger bit reamers, 1/2" & 1" top diameters, (Sold). |
Rosebud Countersinks
3 antique rosebud countersinks 3/8", 1/2", 5/8",(Sold). |
Long Auger Bits
Extra long auger bits from 12" to 30" long, asking $5. each. (Some are Sold). |
Irwin Adapter Shank Bits
Vintage NOS #11 Irwin adapter shank wood bits for brace or electric drills, asking $10. each. |
Adjustable Expansive Drill Bits
Vintage adjustable expansive drill bits, Irwin #22, Russel Jennings, Craftsman, asking $20. each |
Vintage Adjustable Counter Bore
Vintage #80 adjustable 3/8" counter bore with #36 drill bit, 1/4" shank, with original box, Made by Conn. Valley Mfg. Co. $25. |
Vintage Mephisto square shank 18" bit extension, $20. |
Vintage 3-jaw chuck attachment, asking $25. |
|
Tapered Spoon Auger Bit
Antique tapered 1/2" to 1 1/4" auger spoon bit, (Sold). |
Gimlet Auger Bits
Antique square tang auger gimlet bits, (Sold). |
Antique Countersink
Antique square tang countersink for 1/2" to 1 1/2" diameter holes, with 10 flutes, asking $40. |
Vintage B.S.V. Co. Cleveland Ohio, brace chain drill attachment, asking $30. |
Vintage Millers Falls Co. brace chain drill attachment, asking $40. |
Millers Falls adjustable angle auger brace adapter, (Sold). |
1923 Stanley Sweetheart # 610 pistol grip drill,(Sold). |
Made in Germany hand drill, (Sold). |
1939 Stanley 1220 Defiance hand drill, $25. |
Talco made in England hand drill, (Sold). |
1.) 1911 John S. Fray Co. #80 corner brace, $75.
2.) 1901 rosewood handles 10" corner brace. (Sold) |
Made in Germany clamp on drill press (Sold). |
Made in Germany, breast drill, asking $40. |
Millers Falls #12 breast drill with level, (Sold). |
Nice 12" hand drill, asking $25. |
1812 wood & brass brace & bat wing bit, asking $35. |
1882 A.H. Reid, Archimedean drills $20. each (Sold) |
1.) Hobbies 7 1/2" archimedes drill, (Sold).
2.) Archimedes 10" wood handle drill $25. |
1895 Goodell-Pratt Co. Greenfield, Mass.USA Patented Aug.13, 1895 rosewood, (Sold). |
1890 Billings & Spencer Co. Packer Ratchet drill No. 1, for square shank drill bits, (Sold). |
Millers Falls No. 2A hand drill, (Sold). |
1908 Skinner Irrigation Co. hand crank, clamp on pipe drilling & tapping drillpress with attached level, (Sold) http://www.freepatentsonline.com/0893667.pdf |
Clipper Fleetway Product, two speed breast drill, Model D with 3-jaw chuck, Made in England, asking $40. |
1945 Stanley 1220 Defiance hand drill, with 7 bits in the handle, asking $45. |
1910 Yankee #1555 North Bros. MFG. Co. ratcheting breast drill, asking $85. (Sold). |
1890 Millers Falls Mass. USA. Breast drill with level, $65. |
1922 Stanley #742 two speed breast drill, with Stanley Sweetheart emblem, $50. |
1890 Millers Falls Mass. USA. two speed breast drill with level, asking $75. |
Antique hand drill, it has hollow handle with screw off cap for bits, 3-jaw chuck, 11 1/2" long, asking $45. |
Hoppe made in Germany 13" hand drill with small drill bits in handle, asking $30. |
1921 Stanley #982 corner bit brace, asking $85. |
Stanley #626, Made in Canada, hand drill, asking $30. |
1896 Goodell-Pratt Company Toolsmiths breast drill, Made in Greenfield, Mass. USA. Pat'd Mar. 31 1896, $35. |
Rusby Patent 1912, #1,046,223 extendable drill brace, Made in Newark, N.J. (Sold). |
1851 Brown & Flather Sheffield, brass plated beech brace with ebony pad and ivory cap, asking $140. |
Vintage hand drill, it has hollow handle with screw off cap for bits, 3-jaw chuck, 14" long, (Sold). |
Antique brace & bit, looks like ebony pad, with batwing bit, asking $65. |
Samson #8012 brace with nice rosewood handles, (Sold). |
1922 Stanley sweetheart #731 breast drill, two speed, 3-jaw chuck, rosewood handles, with level, (Sold). |
Antique gentleman's ball brace & bit, asking $85. |
Antique Colquhoun & Cadman Sheffield, brass framed with ebony infill ultimatum brace & bit, (Sold). |
1911 Millers Falls #4 dual position ratchet corner brace, $85. |
Millers Falls No. 5 hand drill, (Sold). |
Millers Falls #120. two speed breast drill, asking $40. |
Stanley Handyman hand drill, with drill bit storage in handle, asking $20. |
20TH CENTURY / PAT. MAY 21, 1901 brace wrench, adjustable angle feature, "P. LOWENTRAUT MFG.CO. NEWARK N.J. and "TERRITORIES FOR SALE BY S.J.JOHNSTON, LEESBURG,VA". asking $220. |
Antique Millers Falls Mass. breast drill with removeable extra large breast plate, asking $40. |
|
Vintage Stanley Brace & Bits
Vintage Stanley brace & bits $10. each with a free bit. (Some are sold) |
Antique Millers Falls Brace
1) 1911 Millers Falls 14" brace, asking $45.
2) 1890 Millers Falls #222 brace, asking $30.
3) Millers Falls #1710 brace, asking $25.
4) Millers Falls #322 brace, asking $25.
5) Millers Falls #732 brace, askinf $30. |
Amidon, Yankee, Pexto, Stanley
1) Amidon's patent brace, asking $25.
2) Pexto #4910-10 brace, asking $30.
3) 1925 Yankee #2100-8, (Sold).
4) Stanley #965N-10 brace, asking $25. |
|
|
|
|
1913 Diamond Rapid Fire Drill
Antique Diamond Rapid Fire hand crank hammer drill with star bit for drilling holes in concrete, brick and stone, asking $220. |
Vintage Stanley #923 Brace
Vintage Stanley #923 braces, 8", 10", 14", $20. each. |
Antique Wedge Chuck Brace
Antique wedge style chuck brace, $40. (Sold). |
Auger Bit Handles
Antique auger bit handles, (Both Sold). |
1888 Auger Bit Handles
1.) Antique P.S. & W. Co. Pat'd Mar. 20, 1888 auger bit handle, 18" long, (Sold).
2.) Antique weathered auger bit handle, 17 1/2" long, asking $30. |
Antique Auger Bit Handle
Antique auger bit handle, about 16" long, asking $65. |
1876 sugar devil auger, 16" long, (Sold). |
1) Antique tapered 1" to 2" spoon bit auger, (Sold)
2) Antique tapered 3/4" to 1 1/2" spoon bit auger (Sold) |
Antique tapered spoon bit auger, 1" to 3 1/2", 23 1/2" long, weighs about 6 lbs. (Sold) |
Vintage Auger Bits
Vintage easy sharpening factory made auger bits, one 7/8", three 1 7/16", three 1 1/4", $40. each. (The 7/8", two 1 1/4", two 1 7/16" sold) |
Vintage Auger Bits
Vintage like new auger bits, 1 1/2", 1 1/4", 1", 15/16", 7/8", asking $40. each. (Sold) |
3" & 3 1/2" Auger Bits
1.) Huge antique 3 1/2" auger bit, (Sold).
2.) Antique 3" auger bit, (Sold). |
2 1/2" & 3" Auger Bits
1.) Antique 2 1/2" x 27" long auger bit, asking $60.
2.) Antique 2 1/2" x 37" long auger bit, asking $70.
3.) Antique 3" x 31" long auger bit, asking $65. |
Hand Auger Bits
Antique hand auger bits, 1 1/2", 2", 2 1/2", $45. Each. (One on right Sold). |
|
1884 Spoke Tenon Cutters
1.) E.C. Stearns & Co. 3/8" to 1" tenon cutter, (Sold)
2.) Ladd Tool Co. 3/8" to 1" adj. tenon cutter, $40.
3.) E.C. Stearns & Co. 3/8" to 1" tenon cutter, (Sold) |
1878 Spoke Tenon Cutters
1.) G.N. Stearns, tenon cutter, with stop, the largest of the tenon cutters, will cut tenons up to 1 1/4", (Sold).
2.) G.N. Stearns, May 7, 1878 tenon cutter, (Sold). |
Spoke Tenon Cutters
Spoke tenon cutter with 5/8", 3/4", & 7/8" removeable heads, (Sold). |
1899 Spoke Tenon Cutters
1.) 1899 A. A. Wood & Sons Co. Atlanta, Ga, adjustable tenon cutter, with stop, (Sold).
2.) Sargent & Co. tenon cutter, (Sold). |
Antique Spoke Pointers
1.) Short spoke pointer, asking $25.
2.) The middle spoke pointer, (Sold).
3.) Tall spoke pointer, on right (Sold) |
Spoke Tenon Cutters
1.) Spoke tenon cutter, with 3/4" insert, $50.
2.) Spoke tenon double cutter 3/4", (Sold) |
1899 A. A. Wood & Sons Co.
1899 A. A. Wood & Sons Co. Atlanta, Ga, adjustable 1/4" to 1 1/4" tenon cutter, with stop, .(Sold). |
Antique Spoke Tenon Cutters
1.) Stearns patented Nov. 23, 1880, 3/8" to 1" tenon cutter with stop, asking $90.
2.) Stearns 3/8" to 1" adj. tenon cutter with stop, $90. |
Antique Spoke Tenon Cutters
1.) E.C. Stearns & Co. Syracuse NY. Patented March 16, 1880 with stop, will cut tenons up to 1 1/4", asking $90.
2.) G.N. Stearns Syracuse NY. Patented March 6, 1878 tenon cutter, very rare, asking $125. |
Buell Bros. boxwood tool handle, with 7 assorted bit tools in handle, (Sold). |
Cocobolo tool handle, with 10 assorted chisel bit tools in handle, unmarked, (Sold). |
Antique tool handle, with 8 tool bits, chisels, saw, unmarked, Asking $55. |
Millers Falls rosewood tool handle with 6 tool bits, chisels, Pat. Jan.14th, 1868, asking $75. |
Antique tool handle with 6 tool bits, asking $45. |
Buell Bros. Clinton, Conn. USA, boxwood tool handle with 5 tool bits, asking $40. |
Vintage knurled steel tool holder with 2 bits, (Sold). |
1867 Stanley Excelsior multy tool cast iron handle with 11 assorted tool bits, (Sold). |
Antique cast iron file or tool handles, asking $30. each. |
Vintage screw on axe head, tool bits in handle (Sold) |
Vintage 4 in 1 brass nesting screw drivers that screw on to the hammer to make the handle of the hammer, unmarked, asking $30. |
|
|
|
Antique & Vintage turn screws, ratchet screw drivers, push drills, tool holder handles, etc.
Antique tools and vintage ratchet spiral screwdrivers, flat turn screws, push drills, archimedean drills, tool holder handles, pocket screwdrivers, awl haft handles, etc..some are over 100 years old.
Starting at the bottom row from left to right are:
1) Hale Bros. Sheffield, 16 1/2" long turnscrew, asking $20.
2) W. Kent Sheffied, 11 3/4" long turnscrew, asking $15.
3) No name flat, 10" long turnscrew, asking $15.
4) No name flat, 8 1/2" long turnscrew, asking $10.
5) No name flat, 6 " long turnscrew, asking $20.
6) No name flat, 4 1/2" long turnscrew, asking $20.
7) 1891 Weltrecord pat. 800293, ratchet screwdriver, (Sold).
8) No name spiral, 8" long screwdriver, asking $20.
9) 1923 Yankee 30A spiral ratchet screwdriver, 13" long, (Sold).
10) Craftsman, west Germany, spiral ratchet screwdriver, 15" long, asking $30.
11) Edu-Drill, spiral ratchet screwdriver, 14 1/2" long, (Sold).
12) Hoppe Made in Germany pushdrill with 5 bits, asking $25.
13) 1923 Yankee #131A brass, spiral ratchet screwdriver, w/bit, (Sold)
14) Stanley Yankee No. 10A ratchet screwdriver, 10 1/2" long, asking $20.
15) Stanley Yankee No. 10A ratchet screwdriver, 7 1/8" long, asking $20.
16) No name, Germany, ratchet screwdriver, 8 1/4" long, asking $20.
17) Surex Allemagne, mini ratchet screwdriver, 4 1/2" long, (Sold).
18) 1903 H.D. Smith Perfect, Handle flat screwdriver, 11 1/4" long, asking $10.
19) Irwin USA flat screwdriver, 14" long, asking $15.
20) Yankee No. 45, push drill, w/4 bits, 8 1/2" long, (Sold).
21) Stanley Yankee No 41, push drill, w/4 bits, 9 1/4" long, (Sold).
22) Archimedes, push drill, w/ hollow handle for bits, 10" long, asking $45.
23) 1891 Goodell Brothers, pat. Nov. 17, 1891, push drill, 9 indexing holes handle, 10" long, $85. 24) A. H. Reid, Pat'd Dec. 12, 1882, Archimedean push drill, 16" long, $75.
25) Boxwood tool handle, W / 7 assorted bit tools in handle, 6" long, asking $65.
26) Cocobolo tool handle, 10 assorted chisel bit tools in handle, 6 1/4" long, $75.
27) 1909 P. L. Robertson Mfg. Co. Milton On. 6" long, (Sold).
28) 3 in 1 Brass mini pocket screwdriver set, 4 1/4" long, asking $10.
29) No name, tool handle chuck screwdriver, 10" long, (Sold).
30) Stanley No. 55, screwdriver 7 1/4" long, asking $5.
31) Stanley No. 20 Hurwood screwdriver, 11 5/8" long, asking $10.
32) Perfect Handle, mini flat screwdiver, missing wood, 3 1/2" long, asking $10.
33) The next 4 are mini sewing machine screwdrivers, asking $10. each.
34) The next 13 are Awl haft handles, asking $10. each.
35) EDU ratchet tool handle, 8 1/2" long, hollow handle, has cracked cap, $20.
36) Stanley No. 49 adjustable bit gauge, asking $20. |
Vintage Perfect Handle
Vintage Perfect Handle flat srew drivers, 3 1/2" to 14 1/2" long, asking $10. to $20. each. (Some are sold) |
Brass Nesting Screwdrivers
1.) Gam Mfg. Co. Lancaster Pa. 4 in 1 nesting screwdrivers, (Sold).
2.) Frey Co. New York, N.Y. 4 in 1 nesting screwdivers, (Sold).
3.) 3 in 1 nesting screwdrivers with pocket clip, (Sold)
4.) Brass adjustable quick release air valve with pocket clip, (Sold). |
Antique Flat Turnscrews
1) Hale Bros. Sheffield, 16 1/2" long (Sold)
2) W. Kent Sheffied, 11 3/4" long $15.
3) No name flat, 10" long turnscrew, (Sold).
4) No name flat 8 1/2" long turnscrew (Sold)
5) No name flat, 6 " long turnscrew, $20.
6) No name flat, 4 1/2" long turnscrew, $20. 7.) unledgeable name 17 1/2" turnscrew (Sold). |
Yankee Ratchet Screwdrivers
1) Yankee #131A plated, (Sold)
2) Yankee #131A brass, 1923 patent dates, (Sold)
3) Yankee #130A plated, (Sold)
4) Yankee #30A plated, 1923 patent dates, (Sold)
5) Yankee #30A plated, 1897 patent dates, (Sold)
6) Yankee #135 plated, asking $25. |
Vintage Push Drills
4 Vintage Stanley Yankee #41Y and 2 Yankee North Bros. #41, they all have 7 bits each, asking $35. each. (Some are sold). |
6" Steel Screwdrivers
Vintage solid steel screwdrivers (Sold). |
|
|
Antique & Vintage wrenches
Antique tools and vintage wrenches from 1844 to 1960's all in good working condition, H.D. Smith Perfect Handle, Abingdon King Dick spanner, Shelley spanner, monkey wrench, stillson wrench, westcott wrench, international harvester wrench, ford wrench, auto wrench, Bemis & Call wrench, Whitman & Barnes wrench, Westcott Keystone Mfg. wrench, Kraeuter & Co The Victor Pat 1903 alligator wrench, Billings A pocket/bike wrench, pipe wrench, adjustable wrench, gray and cresent wrench, horse drawn buggy wrench, 1 11/16" Warren bull dozer wrench, Ford model T 5893 & Ford model A 81A-17017 spark plug wrenches, Mossberg 623, Kawasaki wrench, etc...
Horse drawn buggy & farm wrenches, asking $20. each. |
Monkey Wrenches
Monkey wrenches, asking $25. to $35. each. |
Westcott Wrenches
Westcott wrenches, asking $25. to $35. each. |
Auto Wrenches
Auto wrenches, asking $20. to $25. each. |
12" Bemis & Call Wrenches
Bemis & Call Company, Springfield, Mass. USA, 12" wrenches, weighs 3 1/4 lbs. Asking $55. each. |
King Dick Flyer
Advertizing flyer, (Sold). |
IHC Tractor Wrenches
International Harvester Co. IHC Tractor wrenches, asking $25. each |
15" Bemis & Call Wrenches
Bemis & Call Company, Springfield, Mass. USA, 15" combination nut & pipe wrench, weighs 4 lbs. (Sold). |
18" Bemis & Call Wrench
Bemis & Call Company, Springfield, Mass. USA, 18" wrench, jaws open to 5", weighs 6 1/2 lbs. says "G.N.R.Y." for the Great Northern Railway on it, with Patented Dec. 02, 1873 (Sold). |
16" Bemis & Call, Billings Wrench
Embossed Bemis & Call Co. on one side and Billings on the other side, 16" combination wrench, weighs about 4 1/2 lbs. This is new old stock, asking $125. |
1911 Trimo 18" Wrench
Trimo 18" adjustable wrench, Trimont Mfg. Co. Roxbury Mass. USA patented 12-19-1911, $45. |
12" CNR Spike Puller
Vintage 12" CNR spike puller 1 3/8" diameter hole, $30. |
9 1/4" Ford Auto Wrenches
1.) 1914 Moore Drop Forging Co. Springfield Mass. $30.
2.) Ford 1927 adjustable wrench with square oil plug wrench end, Made by McKinnon Industries, $35. |
1919 Universal Wrench Co.
Universal Wrench Co. 8" adjustable squeeze handle wrench, Patent 6-3-19, 7-22-19, Made in Windsor & Detroit, (Sold). |
1857 E. Ripley's wrench
Antique Ezra Ripley's 12 1/2" long, levers interlock to form an adjustable open end pincer wrench, Patent #16,997, April 7, 1857, (Sold). |
Pexto 18" Monkey Wrench
Pexto 18" monkey wrench, $45. |
1865 J.H. Stubbs Multi-Tool
J.H. Stubbs Multi-Tool, patent number 56166 was awarded to A.W. Park on May 30, 1865, and to B. Boardman for a improved combination tool on July 10, 1866, with a hammer claw, a monkey wrench, a hammer face and a 5/16" square hole in the bottom of the hollow handle for use as a nut driver. Asking $75. |
6" Billings & Spencer Wrench
6" Billings & Spencer Co. Hartford, Conn. USA model D 6 with the B triangle logo, bicycle wrench, made between 1915-1926, asking $45. |
FootPrint Sheffield
1.) Footprint made in England 9" wrench $20.
2.) Sheffield made in England 7" wrench $20. |
Universal Wrenches
1.) 7" Millea's Emergency Tool, Universal Tool Co. Springfield, Mass. Pat. #720168, Feb 10, 1903. Combination tool, nut, pipe, buggy wrench, pipe cutter, screwdriver, wire cutter. (Sold).
2.) 9." Utilex comb. wrench, hammer, screwdriver, nail puller, ruler, file. Bernard Forster, Manchester, England, BRITISH MADE- PAT NO 579210 - REG DES 841889 - Oct. 31,1950. asking $30. (Sold) |
Spanner Wrenches
1.) 6" Shelley spanner, for 1948 Jaguar XK120 toolkit, (Sold)
2.) 4" Abingdon King Dick spanner, Pat 1923, (Sold) Abindon Works Ltd. Tyseley Birmingham, |
1903 Alligator Wrench
1.) 7" MCCORMICK / Pat'd SEP. 7, 97 Vandegrift's patent wrench, asking $20.
2.) 7" alligator wrench, THE VICTOR - PAT MAY 26 03 - KRAEUTER & CO. INC./ FORGED HIGH CARBON STEEL, made by Kraeuter & Co. Newark, New Jersey, $25. |
24" Dickson Automatic Wrench
Dickson Automatic 24" wrench, patented Sept. 30, 1913, it weighs about 6 1/2 lbs. US patent 1,055,724 Canadian patent CA-150,764 asking $35. |
Brace Wrench
20TH CENTURY / PAT. MAY 21, 1901 brace wrench, adjustable angle feature, "P. LOWENTRAUT MFG.CO. NEWARK N.J. and "TERRITORIES FOR SALE BY S.J.JOHNSTON, LEESBURG,VA". (Sold). |
WW2 Auto Wrench
WW2 #41-W-450 15" auto wrench, Universal Metal Products LA. Calif. (Sold). |
Antique Buggy Wrench
Antique S-Curve Buggy Wrench, asking $45. |
Millea's Universal Tool
7" Millea's Emergency Tool, Universal Tool Co. Springfield, Mass. Pat. #720168, Feb 10, 1903. Combination tool, nut, pipe, buggy wrench, pipe cutter, screwdriver, wire cutter. asking $45. |
|
1921 Andree Wrench
Antique Andree Wrench patent May 10, 1921, plumbing basin wrench, $30. |
CNR 20" S-Curve Wrench
Antique CNR 20" S-curve wrench 372A Gray 1 1/4" & 1 1/16", Made in Canada, asking $85. |
Herbrand #194
1945 Herbrand No.194 drain plug 7 in 1 wrench, Made in USA for square & hex nuts, asking $20. each |
1913 Carll Wrench
8" Carll Wrench P.T. Co. Pat'd May 6, 1913, adjustable reverseable wrench, made in USA, asking $25. |
4" German Spanner Wrench
Vintage 4" spanner, made in Germany, asking $35. |
4" Abingdon spanner
Vintage 4" Abingdon spanner, $40. |
Ford Wrenches
1.) Antique embossed Ford oil can, (Sold).
2.) Ford model A & T wrenches, asking $20. each.
3.) Ford model T T truck wrench, asking $25.
4.) Ford 1927 adjustable wrench with square oil plug wrench end, Made. by McKennon Industries, $35. |
Connecting Rod Wrench
1908 Mossberg 623 5/8 hex socket wrench, The offset shank of this wrench was designed to clear obstacles when servicing the fourth connecting rod of the Model T Ford. Asking $15. |
Eifel Flash PlieRench
1916 Eifel flash plieRench, Patent 5-2-1916, Flashsls Chicago, (Sold). |
Square Lug Wrenches
1.) Antique hand forged 1" square wheel lug nut ratchet for wagon wheels, (Sold)
2.) Antique hand forged cylinder tooth wrench or wagon wheel wrench, 1" square nut hand T-wrench, $45. |
Speed Wrenches
Gray #1737 & #1729 assembly line speed wrench, $20. for the pair. |
Duro Socket Set
1929 Duro metal products Co. hex drive ratchet socket set, $10. |
Antique wire casing stripper & scriber with roller cutter, and pull handle, asking $25. |
Antique hog ring pliers & a box of Decker's hump Hill's hog pig rings, asking $25. |
Vintage P-D-Q wheel weight removers, pliers, cutter, hammer, screwdriver, combination tool, (Sold). |
1914 Bernard's shoe button tool, stapler, pliers, cutter, Schollhorn Co. Newhaven Conn. Paragon, $20. http://www.datamp.org/patents/displayPatent.php?id=45109 |
Antique spring spreader pliers, hammer, asking $20. |
Antique J.M.C. forged J-clip crimper pliers, asking $25. |
Vintage piano wire cutters, Fur Harten Draht, $20. |
Vintage grommet leather punch eyelet crimper (Sold). |
1.) 8" knob & claw pincer, nail remover, $20.
2.) 6" Elliott Lucas Ltd. Cannock, England, knob & claw pincer, nail remover, $20. |
|
|
|
|
Distillery Bung Hole Auger
Antique US. Bung MFG. Co. Cincinnati Ohio, whiskey barrel 2 1/2" bung hole distillery auger & reamer, from 1 7/8" to 2 1/2", weighs 6 1/2 lbs. asking $120. |
Bung Hole Auger
Antique barrel, wine keg, bung hole auger & reamer, from 1 1/8" to 2 1/8', weighs 2 1/4 lbs. $30. (Sold). |
Enterprise Bung Hole Auger
Antique Trade "Enterprise" Mark "The Best" bung hole auger & reamer, from 5/8" to 1 1/2", weighs 2 lbs. (Sold). |
Barrel Hoop Driver
Antique cooper's hoop driver to install hoops on barrels, asking $30. |
Enterprise Bung Hole Auger
Antique Enterprise barrel bung Hole auger, asking $55. |
Bung Hole Reamer
Antique Monument 1 1/4" hand countersink, made in Sheffield, (Sold). |
Distillery Bung Hole Auger
Antique Dry Cino pat'd Feb. 17, 1885, whiskey barrel 3" bung hole distillery auger & reamer, (Sold). |
1832 Barrel Shave Chamferer
D.R. Barton 1832 barrel shave chamferer, also called a coopers froe for splitting barrel staves, has a 6" blade, weighs 7 1/4 lbs. (Sold). |
Cooper's Adzes
1) 2 1/2" coopers adze, $45. (Sold).
2) 3 1/4" coopers adze, $45. (Sold). |
1867 Henry Disston & Sons
Antique Henry Disston & Sons 19 1/4" spokeshave barrel stave shave with a 4" blade, (Sold). |
1889 Cincinnati Tool Co.
1889 Cincinnati Tool Company, cooper's barrel stave shave 18" spokeshave with a 2 7/8" blade, (Sold). |
1837 L. & I.J. White
Antique 1837 L. & I.J. White cooper's barrel stave shaves 16" spokeshave with a 2 1/2" blade, asking $120. |
Rare Spokeshaves
1.) A.A. Wood & Sons Co. #2 double sided concave & flat cutters, curved bottom, (Sold).
2.) Stanley #62 reversible spokeshave with V-shaped Stanley blade, (Sold).
3.) Stanley bronze spokeshave with side guides, V Stanley blade, rounded bottom, (Sold). |
Rare Spokeshaves
1.) E.C. Stearns & Co. Syracuse NY. Pat'd Mar. 27, 1900 flex bottom compass plane spokeshave, (Sold).
2.) The Cin'Ti Tool Co. with Hargrave blade, (Sold)
3.) Bronze Gullwing Pat. Nov. 17, 1868 with Charles Buck blade, (Sold). |
Spokeshaves & Shaves
1.) Stanley #68 carrage makers $120. rabbet spokeshave Sweetheart blade,
2.) Union MFG. Co. New Britain Ct. $85.
3.) 1884 Tatum & Co. cabinet shave, Keiser's patent June 10, 1884 no blade, asking $85.
4.) Antique wood concave spokeshave, (Sold). |
Round Concave Spokeshaves
1.) E.C. Stearns & Co. #9 concave spokeshave, $65.
2.) Keen Kutter #K95 concave spokeshave, (Sold).
3.) Bailey #5 concave spokeshave, (Sold).
4.) L. Bailey #5 w/ Bailey blade spokeshave, (Sold).
5.) Cin. T. C. W/ Hargrave blade spokeshave, (Sold). |
Double Spokeshaves
1.) A.C. Bachelder 1887, concave & straight (Sold).
2.) Seymour Smith & Sons, concave & straight $50.
3.) Seymour Smith & Sons, concave & straight $60.
4.) Newer Green Kunz, concave & straight $30.
5.) Stanley 60 concave & straight $40. (missing blade)
6.) Stanley 60 concave & straight $70. (not pictured) |
Antique Wood Spokeshaves
1.) 3" blade wood spokeshave, (Sold).
2.) 2 1/2" blade spokeshave, (Sold).
3.) 3" blade for a wood spokeshave, $20. |
Stanley Chamfer Shaves
1) Stanley #65 Sw. chamfer spoke shave, (Sold).
2) Stanley #65 chamfer spoke shave, that was fixed asking $90. |
Spokeshaves & Shaves
1.) L. Bailey July 13, 1858 spokeshave, asking $120.
2.) Stanley #67 Universal spoke shave with 2 detachable bottoms, round & flat, asking $180.
3.) Millers Falls #1 cigar shave, Feb. 19, 1884, (Sold). |
Stanley #66 Hand Beader
1) Stanley #66 hand beader with one cutter, pat. Feb. 9, 1886, asking $100.
2) Stanley #66 hand beader, missing clamp, type 1, pat. Feb. 9, 1886, asking $60. |
Convex & Concave Spokeshaves
1.) Clifton #550 concave spokeshave, asking $220.
2.) The Cin. T. I. Tool company convex spokeshave with original marked blade, (Sold). |
Bronze Stanley Spokeshaves
1.) Stanley #51R bronze spoke shave, $85.
2.) Stanley #52 bronze spoke shave, $85.
3.) Stanley #68C bronze spoke shave, $220.
4.) Stanley #68 bronze spoke shave, $220.
5.) Stanley #68R bronze spoke shave, $220.
6.) Bronze carrage builders spoke shave, $220. |
|
Round Spokeshaves
1.) 1870 S. Packard heel shave, asking $45.
2.) 1870 S. Packard #5 round inshave, (Sold).
3.) Snell & Atherton #4 round inshave, (Sold).
4.) Moniark Mfg. concave spokeshave, (Sold).
5.) Stanley #55 hollow face spokeshave, (Sold).
|
Spokeshaves
1.) Stanley #151 spoke shave, (Sold).
2.) Stanley #151 SW. spoke shave, (Sold).
3.) 1870 Stanley #54 spoke shave, asking $50.
4.) Stanley #51 spoke shave, asking $20.
5.) Stanley #51 new spoke shave, (Sold).
6.) No name #51 spoke shave, (Sold). |
Spokeshaves
1.) Dunlap spoke shave, asking $40.
2.) Stanley #64 SW. spoke shave, $30.
3.) Stanley #64 spoke shave, $25.
4.) Stanley #63 spoke shave, (Sold).
5.) Seymour Smith & Sons double shave, concave & straight cutters $50.
6.) 1848-1849 W. Trowbridge, Worcester Mass. brass spoke shave body, missing blade & cover, asking $35. |
Folding Drawknives
1.) Watrous & Co.1857 adjustable drawknife (Sold)
2.) C.E. Jennings, 1878 folding 8" drawknife, (Sold)
3.) A.J. Wilkinson, 1895 folding 9" drawknife, (Sold)
4.) A.J. Wilkinson, 1895 folding 8" drawknife, (Sold)
5.) J.S. Cantello, 1880 folding 8" drawknife, (Sold)
6.) C.E. Jennings 1906 folding 10" drawknife,(Sold)
7.) GreenLee, Ill. USA. folding 10" drawknife, (Sold)
8.) Winsted Edge Tools, folding 14" drawknife, (Sold) |
Folding Drawknives
1.) Pat. Applied for folding 10" drawknife $120.
2.) Palmer Meadville PA. folding 10" drawknife $100.
3.) Winsted Edge Tool Works 10" drawknife, $120.
4.) J.S. Cantello, 1880 folding 8" drawknife, $120.
5.) A.J. Wilkinson, 1895 folding 8" drawknife, $160.
6.) A.J. Wilkinson, 1895 folding 8" drawknife, (Sold).
7.) Fulton Feb. 20, 1906 folding 8" drawknife $100. |
Antique Drawknives
1.) D. Hobson Sheffield 12" drawknife, (Sold)
2.) Marples & Sons Sheffield, 10" (Sold).
3.) Pexto 8" drawknife, (Sold).
4.) H. Galt 16" drawknife, (Sold).
5.) Essex Mfg. 10" drawknife, (Sold).
6.) 1909 Hills-Galt 9" drawknife, (Sold).
7.) 1883 E. Broad & Sons 8" (Sold) St. Stephen, New Brunswick.
8.) Warnock & Co. 10 1/2" drawknife, $60. Galt
9.) Biebroah & Sons 10" drawknife, (Sold) |
Folding Drawknives
1.) Bridge Tool Co.1900 folding 8 1/2" drawknife $120.
2.) Shapleighs D.E. 1909 folding 9" drawknife, $120.
3.) Witherby, 1849 folding 9" drawknife, $160.
4.) H.S.B. & Co. (O.V.B) 9" Wilkinson 1895, $170.
5.) Jennings & Griffin 1906 folding 8" drawknife $120.
6.) A.J. Wilkinson, 1895 folding 8" drawknife,(Sold).
7.) Approved Dunlap Tools 8" drawknife (Sold).
8.) Fulton, Feb. 20, 1906 folding 8" drawknife, $100. |
Folding Drawknives
1.) A.J. Wilkinson, 1895 folding 7" drawknife, $140.
2.) J.S. Cantello, 1880 folding 6" drawknife, $180.
3.) A.J. Wilkinson, 1895 folding 7" drawknife, $140.
4.) Palmer Meadville PA. Folding 8" drawknife $90.
5.) Shapleighs D.E. 1909 folding 8" drawknife, $140.
6.) No Name Wilkinson folding 8" drawknife $140.
7.) H.S.B. & Co. (O.V.B) 8" Wilkinson 1895, $170.
8.) A.J. Wilkinson, 1895 folding 8" drawknife, $140. |
1885 Chandler's Chamferer
1885 Chandler's brass chamfer guides for drawknife blades up to 1 3/8", F.W. Slayton, patented July 14, 1885 (Sold). |
Antique Drawknives
1.) Nobles Mfg. Co. Elmira NY. 1857-1870 adjustable 10" drawknife, asking $95.
2.) Nobles Mfg. Co. Elmira NY. 1857-1870 adjustable 8" drawknife, asking $85.
3.) Rare 1880 P.S. & W. 10" drawknife, $90. (Sold). |
1894 Snow & Nealley Drawknife
Antique 1894 Snow & Nealley Co. Bangor Maine, 12" blade log peeling mast drawknife, for making ships mast, (Sold). |
1832 D.R. Barton Shave Peeler
Antique 1832 D.R. Barton 17" wide heavy duty 8" curved blade shave peeler hollowing draw knife, (Sold). |
1.) 1832 D.R. Barton 20" with 10" blade, (Sold).
2.) D.R. Barton 16" with 5 1/2" curve blade (Sold)
3.) Beatty & Son 22" with 11 1/2" blade, asking $120. |
1.) 1832 D.R. Barton 19" with 9" blade, asking $120.
2.) No-Name 20" with 10" blade, (Sold).
3.) No-Name 18" with 8" curved blade, (Sold). |
1.) Hand forged 1 3/4" gouge drawknife, asking $60.
2.) Carriage builders 1/2" groover drawknife, asking $40.
|
C. Drew & Co. Scorp Caulk Trimmer
Antique 1837 C. Drew & Co. Shipwrights scorp caulk trimmer, asking $120. |
Bagshaw & Field Scorp
Antique Bagshaw & Field 4 3/4" scorp, (Sold). Walter Bagshaw and Albert Field were toolmakers in Philadelphia from 1881 -1925 |
No-name Scorp
Vintage scorp, 4 1/4" blade, (Sold). |
Schaffer & Cobb Scorp
1.) Antique Schaffer & Cobb 5 1/2" round scorp, $100.
2.) Antique heavy 5" scorp, ornate handles, $100. |
Stortz & Son Scorp
1.) Antique Stortz & Son Phila. PA. 4 3/4" scorp, $100.
2.) Antique Cast Steel 5" scorp, asking $90. |
One Handed Scorp
Antique one handed scorp, 3" cutting edge, hand forged, (Sold). |
Letter & Number Stamp Sets
Vintage letter & number steel stamping sets, (Sold). |
Leather Hole Cutters
1.) Braunsdorf Mueller Co. Elizabeth, N.J. (Sold).
2.) Small antique 5" leather cutter, (Sold).
3.) Hargrave leather hole or gasket cutter, (Sold). |
Antique Awl Haft Handles
Antique awl haft handles, $10. each. |
Wiss inlaid 4N Mule Shears
Wiss inlaid 4N Mule shears 13" long, (Sold). |
Lasting Pinchers
Two Union Whitcher 1887 shoe makers lasting pinchers pliers, (Sold to www.charkowshoes.com) |
Pinking Iron
Antique pinking iron, strap end leather cutter tool, it measures 1" wide by 7" long, asking $20. (Sold) |
Antique Barsky Hachinette Cutter
Antique French Comptoir De Barsky, Paris New York hachinette cutter, (Sold). |
Antique Hammer & Tack Remover
Small antique hammer with tack remover, about 9" long, asking $35. |
Antique Swivel & Strait Cutter
Antique cast iron swivel & straight cutter for cutting patterns, asking $45. |
1903 Atkins Belt Punch
Antique E.C. Atkins & Co Inc. retractable hole punch for 1/8" to 1/2" leather belt holes, Made in Indianapolis Indiana, (Sold). |
Union Warranted Cutter
Antique cast iron embossed Union Warranted cutter wheel, (Sold). |
Leather Scrap Hatchet
Antique leather SCRAP Hatchet Made by U.S.M.C. United Shoe Machine Co. 3" blade, 7" long all cast iron, weighs 2 lbs. Asking $45. |
Sew Awls for All
1.) Two vintage C.A. Myers Co. sew awls with wrench & needle, (Sold).
2.) One antique sew awl with needle, asking $30. |
1878 Empire Leather Lace Cutter
Antique cast iron 1878 Empire leather lace cutter slitter with original box with instructions on box, (Sold) |
Leather Lace Cutter
Antique cast iron leather lace cutter slitter in good working condition, asking $75. |
36 CrafTool Co. Stamps
36 Vintage Craft Tool Co. Leather punching stamps with wood stand, $40. (Sold). |
Hackbarth Stamp
Vintage Hackbarth Phoenix Arizona, stainless steel leather punching stamp, (Sold). |
Antique Swivel Knife
Antique swivel knife with 3/8" blade (Sold). |
OTC #613 Hole Punch Set
Vintage OTC hole punch set with metal box, (Sold). Owatonna Tool Company, Made in Owatonna Minn. |
Antique Fleshing Knife Tool
Antique Billeric double sided with two removable 11 1/4" blades hide fleshing knife tool to flesh hides before tanning, (Sold). |
3 1/2" Leather Cutter
Antique 3 1/2" wide blade leather cutter with a 4" rosewood handle, (Sold). |
Leather 3/4" Hole Punch
Antique 3/4" hole punch with copper pad for leather or rubber belting, asking $65. |
Large Hole Punches
1.) 3/4" Kraeuter & 3/8" Kraeuter, (Sold).
2.) 5/8" Henry Boker & 1/2" Henry Boker, (Sold).
3.) 2 1/4" C. S. Osborne & Co. Harrison N.J. (Sold). |
Small Hole Punches
M F Co., Henry Boker,Marples Sheffield, hole punches, (Sold). |
1826 C.S. Osborne 4" Draw Slitter
Estd. 1826 C.S. Osborne Newark NJ. "Latta" #52 rosewood & steel twist handle 4" leather cutter slitting draw gauge with a unique design the body rotates to slide quickly to different widths, asking $140. |
1865 Henry Boker 4" Draw Slitter
1865 Henry Boker cast iron pistol grip 4" leather cutter slitting draw gauge, (Sold). |
1906 C.S. Osborne 4" Draw Gauge Slitter
1906 C.S. Osborne Harrison NJ. wood handled pistol grip 4" leather cutter slitting draw gauge, (Sold). |
1826 C.S. Osborne 5" Draw Slitter
Estd. 1826 C.S. Osborne Newark NJ. ebony & brass pistol grip handled 5" leather cutter slitting draw gauge, (Sold). |
C.S. Osborne 4" Draw Slitter
C.S. Osborne & Co. Newark NJ. ebony & steel pistol grip handled 4" leather cutter slitting draw gauge, asking $95. |
C.S. Osborne 4" Draw Slitter
Estd. 1826 C.S. Osborne & Co. Newark NJ. rosewood & brass handled 4" leather cutter slitting draw gauge, asking $120. |
1900 American Slug Cutter
Antique cast iron American letter press lead block slug cutter with patent date May 22, 1900 on it. Grandpa last used it as a tobacco cutter. It weighs about 8 lbs. Asking $120. |
Arrow Tobacco Cutter
Antique Arrow tobacco cutter, S.C.W.W. Co. it measures about 18" x 4 1/4" x 6 1/2", asking $120. |
1866 Nashua Tobacco Cutter
Antique 1866 Nashua Lock Co. New Hampshire, Pat'd April 24,1866 tobacco cutter, asking $120. |
Champion Knife Improved 
The Champion Knife Improved tobacco cutter, Interprise MFG. Co. Philada. Patented July 25. 1871, 6 3/4" x 4 1/4" x 18", it weighs 7 1/2 lbs. (Sold). |
1820 Tobacco Cutter
Antique cast iron tobacco cutter chopper, has patent date May 11, 20, it weighs 2 1/2 lbs. (Sold). |
Battle Axe Tobacco Cutter
Antique Battle Axe Tobacco Cutter made by The Rogers Iron Co. Springfield Ohio, some were popular for decapitating chickens, asking $125. |
Antique 1902 The Parmenter & Bulloch MFG. Co. LTD. Ganonoque, Ont. # 2 cast iron rivet setter for brake shoe linings, asking $35. |
Antique 1896 Tom Thumb, The Sheehan MFG. Co. Salem O. USA. Pat'd Jan. 21, 1896 & June 11, 1901, cast iron rivet setter, asking $35. |
Antique 1884 cast iron, leather eyelet riveter press, asking $25. |
|
|
|
|
Vintage cast iron DECKER, Dr. Miller animal marker & snout cutter tool, Made in Keokuk Iowa, $30. |
1925 Whitney Metal Tool Co. Rockford Ill. capacity 1/4" in 18 gauge steel punch #5-2, asking $45. |
Vintage Handy Button Mach. Co. Chicago, USA # 83542, weighs 13 1/2 lbs. Asking $35. |
Shoe button press pliers, BX1 126 & 127, asking $25. |
Antique 1897 E.J. Brooks & Co. NY. Patent Dec. 7, 1897 crimper, lead sealing tool, $35. |
Hand press on wood base, $20. |
Sharpening Whetstones
Antique razor hone & knife sharpening oil stones in wood boxes, asking $30. each. (One on right is sold). |
Quick Cut Oil Stone
Antique Quick Cut Oil Stone with original paper label & a walnut or mahogany wood box that is 8 1/2" x 2 1/2" x 1 3/8" high. The label says "Quick Cut Oil Stones, unattainable in quality, warranted free from soft or hard spots" and has a Trade Mark crest. $120. |
Norton Sharpening Stone
Norton #57-8015-4 double sided fine and course sharpening stone with wood box that measures about 6 3/4" x 2 3/4" x 1 5/8" high, (Sold). |
|
|
Antique Sharpening Stone
Antique very hard sharpening stone for straight razors in a nice 5 1/2" x 2 3/4" x 1 3/4" walnut or rosewood box, $85. |
Soft Stone
Antique soft sharpening stone 2 1/2" x 2" x 1 1/4", asking $20. |
Bay Chaleur Sharpening Stone
Vintage NOS, Bay Chaleur Sharpening Stone, The Read Stone Co. Ltd. Stonehaven NB. With original paper, it measures 10" x 1 1/4" x 3/4", asking $30. |
Pocket Sharpening Stones
Three vintage 3" pocket sharpening stones with leather pouches, asking $10. each. (Right one Sold) |
Scythe Sharpening Stone
Vintage NOS scythe sharpening stone, it measures 9" x 1 3/8" x 1/2", $25. |
Carborundum Stones
1.) Carborundum #45 aluminum oxide sharpening stone, asking $25.
2.) Carborundum #193 axe stone, Niagra Falls Canada, with original box, asking $25. |
#57 Carborundum Stone
Vintage wood handled #57 Carborundum brand stone mainly used for sharpening long blade items like a scythe, lawn mower blade, etc. asking $25. |
Hand Crank Grinder Wheel
New old stock 16" x 3" grinding wheel for a very large hand crank grinder, weighs 50 lbs. $50. |
1877 E.C. Stearns Honing Guide
Antique 1877 E.C. Stearns & Co. Syracuse NY. honing guide for chisels & plane irons up to 2 1/2" wide, adjustable angles, (Sold). |
Antique Honing Guide
Antique honing guide for chisels & plane irons up to 2 3/4" wide, adjustable angles, has a wood roller wheel, (Sold). |
Eclipse #36 Honing Guide
Vintage Eclipse No. 36 honing guide for chisels and plane irons, (Sold). |
Small Antique Oiler Cans
Small antique oiler cans, asking $20. each. (Top & bottom cans on left and flat one is sold) |
Antique Brock Snyder Oiler
Antique oiler that has the stamp of "The Brock Snyder MFG. Co. Grimsby Ont." on the bottom of it. It is green, which probably was for the military during the war since the factory was open between 1920 and 1958. $50. |
Huffman Swing Arm Oil Can
Antique swing arm 1/2 gallon oil can with can piercer, Huffman MFG. Co. Dayton Ohio, with US Patents on can 1364889, 1966082, 2002610, 2002611, 2017818 . (Sold). |
Beatty Oiler Can
Antique Beatty oiler can, (Sold). |
28" CPR Train Oiler
Antique CPR embossed train oiler, 28-inches tall, asking $85. |
WW2 Machine Gun Oilers
1.) German WW11 Wehrmacht MG34 MG42, 7.92×57mm Mauser needle oiler coded evx, oil can from Nazi Germany machine gun armourers pouch MG 34 42, in good condition, it measures about 3 1/4" dia. x 1" x 6", asking $60.
2.) Small brass 2 1/4" dia. gun oiler, $25. |
1940's Brass Primer Pump
Antique 1940's brass hose primer pump, S.S. Holden LTD. Ottawa, it measures 25" long, (Sold). |
Cyclops 1922 Nail Puller
1922 Cyclops nail puller MFG. by Union Hardware Co. Torrington Conn. USA, Extends 18" to 23", $40. |
Rivet Setters
Tinner's rivet setting tools for copper and steel rivets, (Sold). |
Ezy-Outs Screw Extractor Sets
1) 1920 Ixion Made in Germany #1 to #5 screw extractor set with wood box, asking $35.
2) 1914 Cleveland T.D. Co. set no. 15 ezy-outs screw extractors, #1 to #5 with wood box, asking $40. |
Stanley Clapboard Siding Gauge
Vintage Stanley #89 clapboard siding gauge, $45. |
W. W. France Glass Cutter
Antique two piece brass glass cutter & small screwdriver, W.W. Made in France, asking $20. |
Craftmaster Wedge Vise
Vintage NOS Craftmaster Wedge Vise, from Winston Sales Company Chicago Illinois, (Sold). |
Wood Thread Cutter Dies
Vintage wood thread cutting dies, 1 1/2", 1", 7/8", 3/4", and 3/8", asking $30. each. (Some are Sold). |
Tap & Die Set
Vintage Tap & Die Set, asking $40. |
1885 Antique Tap & Die set
Antique Butterfield & Co. tap & die set, Reece's Patent July 3, 1885, asking $220. |
Vintage Tap & Die set
Vintage Tap & Die set, asking $420. |
Antique Tap & Die set
Antique Tap & Die set, asking $30. |
|
|
|
|
1876 Four Dies Handle
Antique D. Saunders' Sons Pat'd April 25, 1876
Yonkers, NY, U.S.A. US Patent #176,694, plumbers 4 size pipe die handle, it weighs about 5 1/2 lbs. it measures about 18 1/2" long, asking $65. |
Wood Thread Cutters
1) Wood thread cutting 3/4" tap & die, (Sold).
2) Wood thread cutting 1/2" tap & die, (Sold). |
New & Used Taps & Dies
80 Lbs. of taps and dies, some new , some used and some were used once, asking 25% of new cost for new ones, and $2. to $20. each on used ones. |
Antique Butt Mortiser
Antique Waller Tool Co. Chicago IL. Butt Mortiser Mortising Tool Pre-Dates Stanley No.280, (Sold). |
Auto Body Files & Rasp Holder
1.) Proto #1509 auto body file holder with file, (Sold).
2.) Two antique wood file holders with files, (Sold).
3.) Two 14" auto body files with tang, asking $30. |
Skarsten Scraper File
Vintage Skarsten folding scraper file, Skarsten MFG. Co. Ltd. Welwyn GDN City Herts England (Sold). |
Miter Cutting Guide
Antique cast iron bench mount miter cutting guide attachment for cutting up to 3" thick wood, (Sold). |
1899 Miter Cutting Guide
Antique C.O. Seavey Patented Mar. 28,1899 miter cutting saw guide, asking $85. |
1902 Langdon Mitre Guide #41 Star
1902 Millers Falls Langdon Star Mitre Box Co. #41, Mass. portable bench top miter guide, (Sold). |
Gem Folding Mitre Box
Antique 1909 Gem folding mitre box, MFD. by the Alaska Freezer Co. Inc. Winchendon, Mass. (Sold). |
H.C. March 1907 Mitre Vice
Antique H.C. March mitre vice, Pat'd Jan. 8, 1907 Rockford Ill. Asking $120. |
#400 Stanley Mitre Vice
Vintage Stanley #400 mitre vice, weighs 12 lbs. Asking $75. |
1912 Antique 1" Door Hole Guide
1912 National Brass Co. Grand Rapids Michigan, door lock mortice hole guide that's adjustable for 1 3/8" to 2 1/4" thick doors, 1" hole guide, asking $30. |
Molding Miter Trimmer
Antique Pootatuck Corp. Lion Homecraft miter trimmer Stratford, Conn. 17" x 6" x 6", (Sold). |
Stanley #59 Doweling Jig
Vintage Stanley #59 Doweling jig with 5 drill guides & original instructions sheet, (Sold) |
Horse Hoof Trimming Nippers
1.) HELLER Bros. horse hoof trimming nippers , 14 '' long, Pat'd May 28, 1907, asking $30.
2.) HELLER Bros. horse hoof trimming nippers , 14 '' long, Made in USA, (Sold).
3.) Henry Boker horse hoof trimmers, 12" long, $25. |
Samson Pexto Tin Snips
1.) #100 Pexto 10" small tin snips, (Sold).
2.) #50 Samson Pexto 11 1/2" tin snips, (Sold).
3.) #012 Blue Bird 12" tin snips, (Sold).
4.) #46 Samson 16 3/4" tin snips, (Sold). |
Arnolds Tin Snips
Vintage Arnolds, Made in Poland, heavy duty tin snips, (Sold). |
 |
Antique & Vintage Hammers |
|
|
Caulking & Leather Mallet
1.) Antique C. Drew & Co. shipwrights caulking mallet. (Sold)
2.) 1898 rawhide mallet, Brockton Mallet Manufacturing Co, Brockton, MA (Sold). |
|
|
Blacksmith's Hammers
1.) Blacksmith crosspeen 3 lb. hammer, (Sold).
2.) Blacksmith crosspeen 2 lb. hammer, (Sold).
3.) Blacksmith crosspeen 1 lb. hammer, (Sold).
4.) Blacksmith crosspeen 1 1/2 lb. hammer, (Sold).
5.) Blacksmith crosspeen 2 1/2 lb. hammer, (Sold). |
Blacksmith's Hammers
1.) Rectangular punch hammer, (Sold).
2.) V-point punch hammer, (Sold).
3.) Cut-off hammer, (Sold).
4.) Round flatter tinsmith hammer, (Sold). |
Farrier's Hammers
1.) Champion, patent July 26, 1910,(Sold)
2.) Heller Bros. 1901, hammer, (Sold).
3.) No-name farrier's hammer, $35. |
Antique Wood Mallet
Antique Timber framers brass ringed mallet, with 3" striking face, weighs 2 lbs. (Sold). |
Cobbler or Tinsmith Hammers
Antique french style leather, coppersmith or tinsmith flatter hammers, asking $65. each. |
Log Marking Hammers
1.) Antique Gilles log marking hammer (Sold)
2.) Vintage bronze log marking stamp hammer "4SE895", it weighs 5 lbs. Asking $60. |
Antique Wood Mallets
Antique wood mallets, asking $20. $30. & $40. each. |
1923 CN Uncoupling Hammer
1923 CN railroad car uncoupling hammer with a nice Hartwell 15" hickory handle, asking $65. |
Bronze Tack Hammer
1958 G.W. Mount P6 bronze magnetic tack hammer, patent #2821222, (Sold). |
Antique Timber Framers Mallet
Antique Timber framers steel ringed mallet, 3 1/4" striking face, 3 1/2 lbs. (Sold). |
Antique Ships Caulking Mallets
Antique shipwrights caulking mallets. $220. each. |
1870 Gilmour & Co. Log Stamp
Antique letter G, 1870 Gilmour & Co. Gatineau Mills, Quebec, log marking hammer, it measures 10 1/2" long, $120. |
Wood Carvers Mallets
1.) Wood carving mallet made from Callphlum wood from New Genia south pacific, asking $65.
2.) Wood carving mallet made from ash wood, (Sold) |
U.S. Navy Caulking Mallet
Antique (United States Engineering Department) U.S. Navy marines shipwrights caulking mallet. Head measures about 2 1/8” diameter by 15 1/4” wide and the handle is about 14 1/2” long.It is stamped on the head and the handle with U.S.E.D. It weighs about 3 1/4 lbs. It is in excellent condition, (Sold) |
Antique Caulking Mallet
Antique shipwrights caulking mallet. Head measures about 2” diameter by 14 1/2” wide and the handle is about 14” long. It weighs about 3 1/4 lbs. (Sold) |
C. Drew & Co. Caulking Mallet
Antique C. Drew & Co. 000 live oak caulking mallet. Head measures about 1 7/8” diameter by 15 3/8” wide and the handle is about 16” long. Christopher Prince Drew was a tool manufacturer, established 1837 in Kingston, Massachusetts, (Sold) |
1885 Slater's Stake Hammer
Antique 1885 embossed Belden Machine Co. of New Haven, Conn. Slater's stake hammer and nail puller, with leather handle, asking $120. |
Rubber Face Steel Mallet
Vintage 2 lb. steel head with hard rubber face mallet asking $30. |
Vintage Caulking Mallet
Vintage caulking mallet, with solid brass ferrules, had inserts at each end, asking $100. |
Log Marking Hammer S
Antique log marking hammer letter S on it, (Sold). |
Punch-Lok & Brass Mallets
1.) Vintage punch-loc mallet, 2 lbs. (Sold).
2.) Vintage 3 lb. Brass mallet, $25. |
Setting Hammers
Four setting hammers, asking $35. each (Some are sold) |
Stone Masons Hammers
Three Stone Masons, Geologist, or Prospectors hammers asking $30. each (One on right & on left sold) |
Brick Layers Hammers
Two brick layers hammers, $30. each |
Antique Log Marking Hammer
Antique solid brass log marking stamp hammer, letter "L", asking $180. |
Specialty Mallets
Three heavy specialty mallets, asking $45. each (The one on right and center sold) |
Planishing Hammers
Four planishing hammers, (Sold) |
Verona Spike Hammer
Vintage Verona spike hammer, 13" long with a 28" long handle, (Sold). |
Small Hammers
1.) Steel 7 1/2" long, weighs 1/4 lb. asking $20.
2.) Steel with hollow brass handle and brass screw cap on end, 8" long, weighs 1/2 lb. (Sold).
3.) 1901 Heller USA embosed horse, ball peen hammer head, it weighs 1/2 lb. asking $25. |
Nox Tox Crate Hammer
Vintage Nox Tox crate hammer, made by Bridgeport Hdwe. Mfg. Corp. Made in USA, asking $20. |
Antique Log Marking Stamp
Antique 1902 Graves and Bigwood Co. "Bell shaped" with letter "X" log marking stamp hammer, it weighs 6 lbs. and in mint condition, (Sold). |
Antique Log Marking Stamp
Antique log marking stamp hammer "47T", it weighs about 3 3/4 lbs. asking $120. |
Planishing Hammer
Antique planishing hammer, (Sold). |
Hub 5 Leather Mallet
Antique cast iron Hub #5 rawhide leather mallet maul, it weighs 10 3/4 lbs. (Sold). |
Goddard's #5 Leather Mallet
Antique 1875 Goddard cast iron #5 rawhide leather mallet maul, it weighs 9 1/2 lbs. (Sold). |
Champion DeArment Hammer
Antique Champion DeArment claw hammer with extra long pole head, made between 1911 to 1927 in Meadville Pa. (Sold). |
Chisels listed on the right are not pictured, Let me know which ones you are interested in and we will email you some pictures.
|
Framing Chisels
Antique & vintage framing chisels, corner chisels, incanell gouges, most are thick webed socket style and not with the tang. They are between 75 and 200 years old. Great old chisels for timber framing and log house building, patternmaker, for making mortice & tenon joints.
length listed is only of the steel part and not with the handle. Some have handles, some don't and some have handles that need replaced.
Antique & vintage chisels with a socket
2) 1/2" x 6 1/2", P. S. & W. Co. $25.
3) 3/8" x 9 3/4", Spear & Jackson 1830, asking $50.
4.) 5/8" x 9 3/4" W Greaves & Sons Sheaf Works Electro Boracic Steel $75.
5.) 3/4" x 6 1/2" Buck Bros. Asking $45.
6.) 9/16" x 7 3/8" gouge, Pexto, Made in USA, asking $45.
7.) 1/2" x 8 3/8" Russell & Brothers, New York, (Sold).
8.) 7/8" x 7" , J. Bentley & Co. Buffalo NY. asking $30.
9.) 1/4" x 6 1/4" Marples & Sons, asking $30.
10.) 3/4" x 8 1/4", Bridge Tool Co. asking $40.
11.) 1/4" x 6 1/2" unledgeable name, asking $30.
12.) 1 3/4" x 10", G. Sheldan, Asfield Mass. 1840, (Sold).
13.) 1" x 6 3/4" Canadian Champion 1870-1910 Warnock Galt $35.
14.) 1 1/16" x 6 3/4" Canadian Champion 1870-1910 Warnock Galt $40.
15.) 1 1/2" x 8 3/4" Warnock & Co. Galt asking $85.
16.) 1 x 11 1/4" Worn-name, asking $60.
17.) 1/4" x 5 1/2", Union Mfg. Co., $30.
18.) 1/2" x 6 1/2", 1882 Hibbard, Spencer, Bartlett & Co. OVB gouge, $40.
19.) 1 1/2" x 6", Craftsman, USA, asking $15.
20.) 1 1/4" x 6", Craftsman, USA, asking $15.
21.) 9/32" x 5 3/8" Craftsman, asking $10.
22.) 2" x 11", E. Broad & Sons, 1883 to 1895, (Sold)
23.) 3/8" x 6 1/2", Thos Ibbotson, cast steel, (Sold)
24.) 2" x 9 1/4" Lakeside, asking $85.
25.) 2" x 11" hand forged chisel, $60.
26.) 1 11/16" x 10 3/4", No-name, asking $60.
27.) 1 7/16" x 10 5/8", Centc, (Sold).
28.) 1/8" x 8 3/4", No-name, asking $25.
29.) 25/32" x 4 3/4", Green Lee, Rochester Ill. $20.
30.) 1/4" x 10 1/2", Union Hardware Co. Torrington Conn. $40.
31.) 1/2" x 5", Stanley Defiance #1251 USA, asking $25.
32.) 1/4" x 6 1/4", Hoppe, Germany, asking $20.
33.) 1/4" x 5 1/4", No-name just Sweden, asking $25.
34.) 1/4" x 5 1/4" E. A. Berg, Eskilstuna Sweden, (Sold).
35.) 3/4" x 6", E. A. Berg, Eskilstuna Sweden, (Sold).
36.) 1/2" x 5 5/8", Kronan crown logo, Eskilstuna Sweden, $25.
37.) 3/4" x 6", Kronan crown logo, Eskilstuna Sweden, $25.
38.) 1" x 6 1/2", Jernbolaget, Eskilstuna, Sweden, (Sold).
39.) 1 3/4" x 10" Keen Kutter, asking $60.
40.) 1/4" x 8", Ohio Tool Co. asking $40.
41.) 1/2" x 8", Ohio Tool Co. asking $50.
42.) 1" x 8 7/8", T.H. Witherby, asking $35.
Antique & vintage chisels with a tang:
1.) 1 9/16" x 6", Spear & Jackson,Sheffield cast steel, (Sold).
2.) 1 1/2" x 4 3/4", James Howarth, Sheffield 1846, (Sold).
3.) 1 1/4" x 6 3/8", James Howarth, Sheffield 1846, asking $20.
4.) 1" x 4 3/8", E. A. Bell & Son, Sheffield, asking $15.
5.) 1/4" x 3 5/8", S. Tyzach & Sons, 345 Old Street, 1892, asking $15.
6.) 7/16" x 4 1/2",W. Parples & Sons, asking $20.
7.) 1 1/8" x 5 1/2", W.P., cast steel, asking $40.
8.) 11/16" x 5 1/8", gouge, F. Woodcock, Sheffield, (Sold).
9.) 9/16" x 4 1/2", No-name, asking $20.
10.) 1 1/4" x 6 1/4", Buck Bros. asking $40.
11.) 1/2" x 7", I. & H. Sorby, heavy thick chisel, asking $60.
12.) 3/4" x 4 3/4", Charles Taylor's, Sheffield Tools Ltd. $30.
13.) 3/8" x 4 1/4", gouge, cast steel, F.G. Pearson, (Sold).
14.) 1/2" x 4 5/8", F. Woodcock, Sheffield, asking $20.
15.) 3/8" x 5", V groove, 1850 SJ. Addis London, (Sold).
16.) 1/4" x 4 1/2", R. Sorby, cast steel, asking $15.
17.) 2" x 5 1/2", W. Butcher, cast steel, asking $40.
18.) 1/2" x 3 1/2", Groover, 1870, Douglass Mfg. Co. asking $15.
Some have handles, some don't, some handles need replaced. |
Timber Framing Chisels & Slicks
1.) 4 3/4" x 18 1/4", Humphreysville Mfg. 1866 (Sold)
2.) 3 1/2" x 15 1/2", Warnock & Co. slick, (Sold).
3.) 3 1/2" x 15 1/2", D.R. Barton 1832, (Sold)
4.) 3 1/2" x 14", Lakeside, (Sold).
5.) 3" x 13 1/2" Samson Union Hardware Co. (Sold)
6.) 2 7/8" x 15", no name, no handle, (Sold).
7.) 3" x 12 1/2", unledgeable name, slick, (Sold). |
Massive Timber Frame Chisels
1.) 2" x 13", Underhill Edge Tool Co. (Sold).
2.) 2" x 12 1/4" Peck, Stow & Wilcox Co. (Sold).
3.) 2" x 12 3/8", T.H. Witherby, (Sold).
4.) 2" x 12", The James Swan Tool Co., (Sold).
5.) 2" x 11", Underhill Edge Tool Co. (Sold).
6.) 1 1/2" x 12", Hart MFG. Co. 1870, (Sold).
7.) 1 3/16" x 9 1/4", Mottram 1825, (Sold).
8.) 1" x 10 5/8", Buck Bros. W/deer emblem, (Sold)
9.) 3/4" x 11 1/4", Page & White 1855, (Sold).
10.) 3/4" x 11", L. & I.J. White 1837, (Sold). |
Massive Timber Frame Chisels
1.) 2" x 11 1/2", P. S. & W. Co. (Sold).
2.) 2" x 12" Hubbard & Curtiss Mfg (Sold).
3.) 2" x 12 1/2", P. S. & W. Co. (Sold).
4.) 1 1/2" x 12" New Haven Edge Tool (Sold)
5.) 1 1/2" x 12", Humphreysville Mfg. (Sold).
6.) 1 1/2" x 11 1/4", P.S. & W. Co. (Sold).
7.) 1 1/4"x 10 3/4" T .H. Witherby (Sold). |
1875 Buck Bros. Gouge Set
1875 Buck Bros. pattern makers crank neck gouge chisel set, 1 1/2", 1", 3/4", 1/2", 1/4", (Sold). |
1832 D.R. Barton Gouge Set
1832 D.R. Barton pattern makers crank neck gouge chisel set, 1 1/4", 1 1/8", 7/8", 1/2", 3/8", 1/4", (Sold). |
Warren Axe & Tool Co.
Embossed Warren Axe & Tool Co. 4" x 11 3/8" double edge socket chisel cedar spud, it had a 36" handle, weighs 2 lbs. (Sold). |
L & I J White Pattern Makers Gouge
1837 L & I J White pattern makers crank neck gouge chisels set, 13/16", 3/4", 11/16", 1/2", 1/4", asking $360. |
L & I J White Pattern Makers Gouge
1837 L. & I. J. White pattern makers crank neck gouge chisels set, 1" & 1 1/16", asking $160. |
|
|
|
|
|
Heavy Timber Frame Chisels
1.) 1 3/16" x 9", W. Butcher, (Sold).
2.) 1" x 11 1/2" Horton & Arnold NY. (Sold).
3.) 1" x 8 1/2", Marples & Sons, (Sold).
4.) 15/16" x 11", Hubbard & Curtiss Mfg. Co. (Sold).
5.) 7/8" x 10 3/4", Douglas Mfg. Co. (split), $40.
6.) 3/4" x 9 1/2", Robt. Sorby, (Sold).
7.) 11/16" x 9", I.K. Penfield & Son 1869-1875, $60.
8.) 5/8" x 9 3/4", W. Greaves & Son, asking $75.
9.) 1/2" x 12", Fredk Stones, 1841, asking $50.
10.) 1/2" x 8", J. Warnock & Co. 1870, $40. (Sold)
11.) 3/8" x 9 3/4", Spear & Jackson 1830, (Sold).
12.) 1/4" x 9", W. M. Greaves & Sons 1832, (Sold). |
Antique Socket Chisels
1.) 1 15/16" x 10", Charles Buck, (Sold).
2.) 1 15/16" x 10" heavy no-name, (Sold).
3.) 1 15/16" x 8", no-name, asking $30.
4.) 1 13/16" x 10 1/4", T.H. Witherby, (Sold).
5.) 1 3/4" x 11 1/2", ??? S.H.F. Extra, $70.
6.) 1 3/4" x 9 3/4", J.S.H. & Co. Crown, (Sold).
7.) 1 1/2" x 8 3/4", GreenLee #251, (Sold).
8.) 1 1/2" x 10 3/4", no-name, (Sold).
9.) 1 7/16" x 8 3/4", Buck Bros. deer emblem, (Sold).
10.) 1" x 11", Union Mfg. Co. (Sold).
11.) 1" x 11 1/4", Union Mfg. Co. (Sold).
12.) 1" x 10 5/8", Essex Mfg. Co. asking $60. |
Heavy Tanged Chisels
1) 2" x 6", Spear & Jackson 1830, $40.
2) 1 3/4" x 6 1/2" W. Butcher $40. with arrow & cross emblem
3) 1 1/2" x 9", no-name, asking $30.
4) 1 1/4" x 6 1/2", unledgeable name, $30.
5.) 2" x 5 1/2", W. Butcher, (Sold). (Not pictured) |
Long Narrow Chisels
1.) 11/16" x 7 1/2", Geo Parr, asking $30.
2.) 1/2" x 9" , no-name, asking $20.
3.) 3/8" x 8", New Haven Edge Tool Co., $30.
4.) 5/16" x 10 1/2", Union Mfg. Co., $40.
5.) 1/4" x 8 1/2", no-name, $20.
6.) 1/4" x 11 1/4", G. I. Mix & Co. No. 1 EX. $40.
7.) 1/4" x 8 1/2" W.C. Bailey Sag Harbor Tool Co. $30.
8.) 3/16" x 7 1/2", no-name, asking $20.
9.) 1/8" x 8 1/2", no-name, asking $20. |
Antique Chisels
1.) 1 1/4" x 8 1/2", Tenk's Clipper, (Sold).
2.) 1" x 8 1/4" Jennings & Griffin No. 6, asking $30.
3.) 1" x 8", Winchester #4987, asking $40.
4.) 1" x 8 3/4", New Haven Edge Tool Co. $30.
5.) 3/4" x 8 1/4", Tenk's Clipper, asking $30.
6.) 3/4" x 8 3/4", T.H. Witherby, asking $30.
7.) 5/8" x 8 1/4", Reliance Edge Tool Works, $30.
8.) 1/2" x 8 3/4", no-name, asking $20.
9.) 1/2" x 8 1/4", P. S. & W. Co. asking $25. |
Antique Chisels
1.) 1" x 7 3/4", Jennings & Griffin, $30.
2.) 1" x 7 3/4" Winchester #4987, $30.
3.) 1" x 6 1/2" Jernbolaget Eskilstuna (Sold). (Sweden)
4.) 7/8" x 7 1/4", Ohio Tool Co. $30.
5.) 7/8" x 7", J. Bentley & Co. $30.
6.) 1/2" x 7 1/4", P. S. & W. Co. $25.
7.) 1/2" x 7 3/4", no-name, $20.
8.) 3/8" x 7 1/2", G. I. Mix & Co. $25.
9.) 1/4" x 6 3/4", Jennings & Griffin, $25. |
Socket Gouge Chisels
1.) 2 1/8" x 10 1/4" gouge, Shapleigh Hdw. Co. Diamond Edge, asking $120.
2.) 2" x 11" gouge D.R. Barton 1832, (Sold).
3.) 1 3/4" x 12" gouge, Douglass Mfg. Co. (Sold).
4.) 1 9/16" x 10" gouge, Buck Brothers, (Sold)
5.) 1 1/2" x 12" gouge, Douglass Mfg. Co. (Sold).
6.) 1 3/8" x 8" gouge, The James Swan USA, (Sold)
7.) 1 5/16" x 12" gouge, Douglass Mfg. Co. $90.
8.) 1 1/4" x 9" gouge, Buck Brothers, (Sold).
9.) 1 1/16" x 11" gouge, Buck Bros. $70. |
Socket Gouge Chisels
1.) 1 1/16" x 8 3/8" gouge, Buck Bros. (Sold).
2.) 1 1/32" x 9" gouge, Witherby, asking $80.
3.) 1" x 8 3/4" gouge, Buck Bros. (Sold).
4.) 7/8" x 10 3/4" gouge, Buck Bros. (Sold).
5.) 13/16" x 9 1/2" gouge, Keen Kutter, $75.
6.) 3/4" x 8" gouge, Buck Bros. (Sold).
7.) 5/8" x 8 5/8" gouge, T.H. Witherby, $45.
8.) 9/16" x 6 1/4" gouge, Buck Bros. (Sold).
9.) 1/2" x 7 3/4" gouge, Buck Bros. asking $40.
10.) 7/16" x 9" gouge, Witherby, (Sold). |
Tanged Gouge Chisels
1.) 1 3/4" x 6 1/4" gouge, W. Butcher, (Sold).
2.) 1 1/2" x 6 1/2" gouge, ??earled, $50.
3.) 1 1/2" x 7" gouge, D.R. Barton & Co. (Sold).
4.) 1 1/2" x 6 1/4", A. Thomson NY, (Sold).
5.) 15/16" x 5 3/8", Spear & Jackson (Sold).
6.) 13/16" x 4 3/4" gouge, P. L ? $30.
7.) 3/4" x 4 1/2" gouge, Robt. Sorby $40.
8.) 5/8" x 5" gouge, Robt. Sorby, (Sold).
9.) 13/16" x 7" gouge, T.H. Witherby $60.
10.) 9/16" x 5" gouge, Jas. Swan Co. (Sold).
11.) 3/8" x 3 1/4" Barton Brothers Sheffield (Sold). 12.) 1" x 6 1/2" gouge E. A. Berg, Eskilstuna Sweden, not pictured, (Sold). |
Antique Corner Chisels
1.) 1" x 12", G.I. Mix & Co. corner chisel, (Sold).
2.) 1" x 11 1/4" Buck Bros. corner chisel, (Sold).
3.) 7/8" x 16", No-name corner chisel, $85.
4.) 1 1/8" x 12" 1832 D.R. Barton (Sold).
5.) 1" x 9" Buck Brothers, Millbury Mass. $130.
6.) 1" x 11 3/8" No-name corner chisel, $100.
7.) 7/8" x 10 1/2" N0-name corner chisel (Sold).
8.) 1" x 9 1/2" No-name. corner chisel, $60.
9.) 3/4" x 10 1/2" Ohio Tool Co. Corner chisel, $85. |
Tanged Gouge Chisels
1.) 1 3/4" x 7 3/8" gouge, Made in USA. (Sold).
2.) 3/4" x 4 5/8" gouge, Buck Bros. (Sold).
3.) 3/4" x 4 3/4" gouge, Buck Bros. (Sold).
4.) 9/16" x 5" gouge, 1832 D.R. Barton, (Sold).
5.) 1/2" x 6" gouge, No-name, (Sold).
6.) 1/2" x 5 1/8" V-gouge, Buck Brothers, (Sold).
7.) 3/8" x 5" gouge, James Swan Co. $40.
8.) 1/4" x 4 1/2" gouge, Buck Brothers. (Sold).
9.) 3/16" x 4 1/2" gouge, Buck Brothers. (Sold). |
Socket Gouge Chisels
1.) 3" x 15" gouge, No-name. $220.
2.) 2" x 12" gouge, Made in USA, $100.
3.) 1 3/8" x 11" gouge, Made in USA, $80.
4.) 1 1/2" gouge, 1832 D.R. Barton, (Sold). |
2" Lipped Butteris Chisel
Antique 2" lipped palm butteris chisel, hand forged 14 1/2" long, double handled butteris hoof trimming chisel, asking $85. |
James Swan & Keen Kutter
 1.) James Swan Co. slick chisel 3 1/2" x 13" steel 28" with original handle, asking $420.
2.) Keen Kutter timber framing chisel 3 1/2" x 16" steel, no handle, asking $320.
|
Antique Corner Chisels
1.) 7/8" x 10 1/4" Ohio Tool Co. $85.
2.) 7/8" x 11 1/4" Douglass Mf' Co. $120.
3.) 7/8" x 12" N-N corner chisel (Sold).
4.) 1" x 10 1/2" no-name corner chisel $95.
5.) 1" x 10" Peck, Stow & Wilcox $120. |
Antique Timber Framing Chisels
1.) 2 1/8" x 10 1/2", No-name, asking $60.
2.) 2" x 11 3/4" New Haven Tool Co. (Has a rough shallow socket), asking $75.
3.) 2" x 11", Tapered Hand Forged, asking $60.
4.) 1 1/2" x 10 1/2", No-name, asking $30.
5.) 1" x 10 5/8", Essex Mfg. Co. asking $60.
6.) 1" x 11 1/4", No-name, asking $60.
7.) 1" x 10", Unledgeable GF Mark, asking $65.
8.) 7/8" x 10 3/4", Douglass Mfg. Co. (Cracked Socket), asking $40.
9.) 11/16" x 9", I.K. Penfield & Son, 1869-1875, $60.
10.) 5/8" x 9 3/4", W. Greave & Son, asking $75.
11.) 1/2" x 12", Fredk Stones, Sheffield 1841, $50. |
Timber Framing Chisels & Slicks
1.) 4" x 16", Douglass Mfg. Co. (Sold).
2.) 3 1/2" x 14 1/4", No-name slick, (Sold).
3.) 3 1/8" x 15", Warnock & Co. slick, (Sold).
4.) 3" x 14 3/4", Underhill, slick, (Sold).
5.) 3 3/8" x 13", Hand forged slick, $200. |
W.M. Greaves & Sons Race
1832 W.M. Greaves & Sons Sheffield, race knife timber scribe, pull style 1/4" gouge end, used for marking roman numerals on timbers, (Sold). |
Buck Brothers Lathe Chisels
Antique set of 3 Buck Brothers lathe chisels, $90. |
Craftsman Lathe Chisels
Vintage set of 2 Craftsman lathe chisels, asking $25. |
Marples Lathe Chisels
Set of 3 Marples Sheffield England, (Sold). |
Ajax Timber framing Mortising Drill
Antique Ajax portable angled timber framing mortising hand crank drill, missing wood handles and has small crack on steel up-right but still works good, asking $280. |
1872 Timber framing Mortising Drill
Antique portable angled timber framing mortising hand crank drill, works good, with patent date Jan. 1872, asking $520. |
|
|
|
|
|
 |
Antique
Hand Crank
Grinders |
|
|
Antique hand crank , clamp on grinders , some are very rare and hard to find.
They are from 80 to 160 years old. |
|
|
Antique Fire Fly Luther Mfg.Co. Milwaukee USA hand crank, clamp-on grinder, asking $125. |
Pike No. 5 , Pike Mfg. Co. Pike NH. (Sold). |
Niagara No. 4-60, The Carborundum Co.(Sold) |
1800's Hand crank grinder, asking $65. |
1899 The Universal Sharpening Machine Co. Chicago, hand crank grinder, (Sold). |
1911 The Luther Line No. 5M model 17, (Sold) |
Hand crank 8" wet stone grinder with cast iron water trough, (Sold). |
Hand crank 7" wet stone grinder with cast iron water trough, ready to use to sharpen your axe, $85. |
Large 14" wheel, hand crank wet grinder with water trough, in working condition, (Sold). |
Hand crank clamp on sycle mower blade grinder, $45. |
Keystone Railroad Tool Grinder, Keystone grinder & Mfg. Co. Pittsburgh Pa. USA. (Sold). |
 Vintage small hand crank grinder in good working condition, (Sold).
|
Antique blow torch with brass soldering iron, Smelting crucible burner fire pot stove, Lead melting cast iron pot and ladle, and a stilson pipe wrench, Nice Kit to add to your antique plumbing collection. This set for $120. |
Antique hand forged smelting ladles, (Sold). |
Brass soldering irons, factory & blacksmith forged.
1.) Small size brass $5. to $10. each.
2.) Medium size brass, $10. each.
3.) Medium size brass, twisted steel, $30. each
4.) Large size brass, $20. to $25. each. . (Some are Sold) |
Monitor #26 paraffin copper & brass blow torch, made in England, (Sold). |
1921 No. 146 copper & brass with cast iron knob, blow torch, made by Clayton & Lambert Mfg. $55. |
Turner #180 blow torch, $65. |
1934 T .E. Bladon & Son Ltd. B61 petrol, brass blow torch, made in Birmingham England, (Sold). |
910 Otto Bernz blow torch with rare 2" flat tank & Nov. 15, 1910 patent date, in mint condition, (Sold) |
#101 G. Barthel, Little wonder copper & brass torch, Made in Germany, (Sold). |
1940 Butler #100, steel tank model (made during WW2) blow torch with cast iron knob, asking $30. |
#504 Dominion copper & brass blow torch, Made in Canada, (Sold). |
Small antique copper blow torch, $25. |
#823 Primus (AB) B.A. Hjorth & Co. Made in Sweden, blow torch, asking $120. |
1921 No. 308 copper & brass blow torch, made by Clayton & Lambert Mfg. Co. Detroit Michigan, embossed with name and patent date Jan 4, 1921, asking $65. |
1.) No-info, wood handle, cloth bond cord, $30.
2.) Esico #64, 130 watts, bakelite handle, $40.
3.) Wall Mfg. Co. #1106, 100 watts, $20.
4.) Lenk Mfg. Co. 100 watts, wood handle, $20. |
Antique embossed #600A-1 brass blow torch, Made by Clayton & Lambert Mfg. Co. USA, asking $45. |
Antique G. Barthel #60 blow torch, Made in Germany, with the G.B. Trademark, asking $120. |
Original Max Sievert type 223, Stockholm Sweden, 1 pint brass blow torch, asking $85. |
Small to large heavy cast iron smelting pots, asking $40. to $60. each. (Some are Sold)
|
Antique can of White Gas for blow torches, still has a little inside the can, asking $25. |
Smelting solder crucible burner firepot stove, Clayton Lambert MFG. Co. (Sold) |
1/2" Feathers & Wedges
Stone masons tapered feathers and wedges for 1/2" diameter hole to split stone, $10. each or 3 for $20. |
Shipwrights Caulking Irons
Antique shipwrights caulking irons, the 3 to the left are embossed Joseph Tyzack & Son, Sheffield England, all are (Sold) |
Stone Masons Irons
Antique Stone masons chisel irons, asking 4 for $20. |
Goodyear Tire Irons
2 antique 9" tire irons, one says Goodyear on it, asking $25. for the pair. |
1912 Oster Bull Dog Diehead
1912 Oster Bull Dog Diehead #103R Die Stock #104 hand pipe threader with 24" long handles, Made in Cleveland Ohio USA , asking $45. |
Osborne Caulking irons
One C.S. Osborne 3 1/2" caulking iron,(Sold) and one W.E.C. 1 7/8" caulking iron, (Sold). |
2-man Crosscut Saw Wedges
Antique two-man crosscut saw tapered steel wedges to prevent binding, (Sold). |
1819 W. Gilpin Caulking iron
Antique 1819 W. Gilpin, Wedges Mills, embossed cross axes, caulking reefing iron, about 8" long, (Sold). |
C. Drew & Co. marlin spike
Antique C. Drew & Co. marlin spike wire rope splicing tool, 6" long, asking $45. |
Two 6-foot two man crosscut saws, both (Sold)
 
One man crosscut saw & crosscut saw handles, (Sold) |
Antique & Vintage Hand Saws
Antique Hand Saws, brass back dovetail saws, keyhole saws, hack saws, meat saws, compass saws, crosscut saws, ripping saws, logging saws, docking saws, etc.
1) 1865 Atkin & Sons Sheffield, brass back dovetail saw, (Sold).
2) 1886 H. Disston & Sons brass back dovetail saw , (Sold).
3) 1884 W. Tyzack Sons & Turner No. 13B Sheffield, brass back saw, (Sold).
4) Antique 18" Ship Wrights saw with brass split nuts, asking $60.
5) Antique No Name keyhole compass saw, asking $30.
6) 1860 Wheeler Madden & Clemson, split nuts, compass saw, asking $30.
7) Challenge Canada 15" meat saw, asking $20.
8) Henry Disston & Sons #4 steel back dovetail saw, (Sold).
9) 1877 Disston cast iron saw pad handle, (Sold).
10) 1886 H. Disston & Sons 20" crosscut saw, (Sold).
11) 1873 Shurly & Dietrich Galt, Ont. Can. 25" log notching saw, (Sold).
12) 1880 H. Disston & Sons Philada.,Dual grip 26" ripping saw, asking $100.
13) 1917 Disston Phila. Dual grip 26" ripping saw, asking $85.
14) Steel handle 30" block ice saw, asking $75.
15) Henry Disston & Sons #196 Docking saw, asking $85.
16) Deep throat coping saws, asking $20. each.
17) Electric coping saw, asking $25.
18) Adjustable frame coping saw, asking $25.
19) Antique cast iron Wheeler, Madden, & Clemson 3 stars 8" bone saw, $45.
20) Cast iron hacksaw frame, asking $30.
21) Pistol Grip keyhole saw, asking $35.
22) 1914 Henry Disston & Sons #14 adjustable flooring 9" steel back saw, asking $35.
23) Saint Joseph crosscut bucking saws, $45. each.
24) Two man logging crosscut saws, asking $100. to $220. each. .
25) Shurly & Dietrich Galt Ont. Can. 25 1/2" crosscut saw, (Sold).
26) 1887 The Simonds Saw MFG. Co. Pat. Dec. 27, 1887, has broken handle, $20.
27.) 1928 Warranted Superior 24" Victor crosscut saw, (Sold).
28.) Stanley No. 39-122, 26" X 4" miter box saw, asking $25.
29.) Disston Canada, 24" crosscut saw, asking $25.
30.) Sandvik Tradition #277, 26" crosscut saw, asking $25.
31.) 1886 Shurly & Dietrich Galt Ont. Can. 20" crosscut saw, (Sold).
32.) 1910 Disston USA 15 1/2" crosscut saw, open handle, (Sold).
33.) Warranted Superior 24" crosscut saw, asking $10.
34.) No name removable handle, 16" crosscut saw, asking $20.
35.) 1935 Disston Pacemaker K-3 Keystone 26" crosscut saw, asking $30.
36.) 1876 D. Kimberley & Sons 14" dovetail backsaw, (Sold).
37.) K. In star emblem, made in Germany, 26" crosscut saw, asking $30.
38) E.C. Atkins & Co. 26" 5 tpi ripping saw, asking $90.
39.) 1917 The Arrow Head Saw, vanadium steel, 26" crosscut saw, asking $50.
40.) Warranted Superior, 26" ripping saw, 5 1/2 T.P.I. asking $25.
41.) Disston Canada, 25" crosscut saw, 7 T.P.I., asking $30.
42.) Two man 6' shipwrights saw, asking $140.
43.) 1852 Wingfield Rowbotham & Co. Sheffield, 14" brass back, split nut, 8 T.P.I. asking $160.
44.) Vintage Warranted Superior, 10" brass back dovetail saw, 15 T.P..I. asking $90.
45.) 1828 Moulson Brothers, London Sheffield Spring, 8" steel back, split nut, 16 T.P.I. (Sold).
46.) 1832 Spear & Jackson, Sheffield 14" brass back, split nut, 12 T.P.I. asking $150.
47.) Antique English beechwood & brass keyhole pad saw, asking $35.
|
Antique ice saws with a 60" blade and 76" long with removable adjustable handles, asking $240. each. (One is Sold) |
Nice antique pit saw, 54" blade 70" long with rotatable handle, asking $250. |
Antique 60" blade pit saw, 18 1/2" handle, asking $200. |
Antique buzzsaw saw blades, we have 3 available, 26", 28", and 29" diameter, they weigh about 25 lbs. each, asking $90. each. (26" & 28" are sold) |
Saint Joseph crosscut bucking saw all stained to mount as a wall hanger, asking $45. |
Saint Joseph crosscut bucking saw, (Sold) |
Antique one man 4 1/2' crosscut saw, asking $120. |
Antique one man 4 1/2' crosscut saw, (Sold). |
|
Rare E.C. Atkins 4-foot one man logging crosscut saw with steel riveted handle, asking $145. |
| | |
