Infrared | Infrared | Thermography | Avaliação gratuita de 30 dias | Scribd
Você está na página 1de 29
Infrared From Wikipedia, the free encyclopedia For other uses, see <a href=Infrared (disambiguation) . A false color image of two people taken in long-wavelength infrared (body-temperature thermal) light. This infrared space telescope image has (false color) blue, green and red corresponding to 3.4, 4.6, and 12 µm w avelengths, respectively. Infrared ( IR ) is invisible radiant energy, electromagnetic radiation with longer wavelengths than those of visible light , extending from the nominal red edge of the visible spectrum at 700 nanometers ( frequency 430 THz ) to 1 mm (300 GHz ) (although people can see infrared up to at least 1050 nm in experiment s ). Most of the thermal radiation emitted by objects near room temperature is infrared. Infrared radiation was discovered in 1800 by astronomer Sir William Herschel , who discovered a type of invisible radiation in the spectrum lower in energy than red light, by means of its effect upon a thermometer . Slightly more than half of the total energy from the Sun was eventually found to arrive on Earth in the form of infrared. The balance between absorbed and emitted infrared radiation has a critical effect on Earth's climate . Infrared energy is emitted or absorbed by molecules when they change their rotational- vibrational movements. Infrared energy excites vibrational modes in a molecule through a change in the dipole moment , making it a useful frequency range for study of these energy states for molecules of the proper symmetry. Infrared spectroscopy examines absorption and transmission of photons in the infrared energy range. Infrared radiation is used in industrial, scientific, and medical applications. Night-vision devices using active near-infrared illumination allow people or animals to be observed without the observer being " id="pdf-obj-0-2" src="pdf-obj-0-2.jpg">

Infrared

From Wikipedia, the free encyclopedia

For other uses, see Infrared (disambiguation).

A <a href=false color image of two people taken in long-wavelength infrared (body-temperature thermal) light. This infrared space telescope image has (false color) blue, green and red corresponding to 3.4, 4.6, and 12 µm w avelengths, respectively. " id="pdf-obj-0-13" src="pdf-obj-0-13.jpg">

A false color image of two people taken in long-wavelength infrared (body-temperature thermal) light.

A <a href=false color image of two people taken in long-wavelength infrared (body-temperature thermal) light. This infrared space telescope image has (false color) blue, green and red corresponding to 3.4, 4.6, and 12 µm w avelengths, respectively. " id="pdf-obj-0-19" src="pdf-obj-0-19.jpg">

This infrared space telescope image has (false color) blue, green and red corresponding to 3.4, 4.6, and 12 µmwavelengths, respectively.

Infrared (IR) is invisible radiant energy, electromagnetic radiation with longer wavelengths than those of visible light, extending from the nominal red edge of the visible spectrum at 700 nanometers (frequency 430 THz) to 1 mm (300 GHz) [1] (although people can see infrared up to at least 1050 nm in experiments [2][3][4][5] ). Most of the thermal radiation emitted by objects near room temperature is infrared.

Infrared radiation was discovered in 1800 by astronomer Sir William Herschel, who discovered a type of invisible radiation in the spectrum lower in energy than red light, by means of its effect upon a thermometer. [6] Slightly more than half of the total energy from the Sun was eventually found to arrive on Earth in the form of infrared. The balance between absorbed and emitted infrared radiation has a critical effect on Earth's climate.

Infrared energy is emitted or absorbed by molecules when they change their rotational- vibrational movements. Infrared energy excites vibrational modes in a molecule through a change in the dipole moment, making it a useful frequency range for study of these energy states for molecules of the proper symmetry. Infrared spectroscopy examines absorption and transmission of photons in the infrared energy range. [7]

Infrared radiation is used in industrial, scientific, and medical applications. Night-vision devices using active near-infrared illumination allow people or animals to be observed without the observer being

detected. Infrared astronomy uses sensor-equipped telescopes to penetrate dusty regions of space, such as molecular clouds; detect objects such as planets, and to view highly red-shifted objects from the early days of the universe. [8] Infrared thermal-imaging cameras are used to detect heat loss in insulated systems, to observe changing blood flow in the skin, and to detect overheating of electrical apparatus.

Thermal-infrared imaging is used extensively for military and civilian purposes. Military applications include target acquisition, surveillance, night vision, homing and tracking. Humans at normal body temperature radiate chiefly at wavelengths around 10 μm (micrometers). Non-military uses include thermal efficiency analysis, environmental monitoring, industrial facility inspections, remote temperature sensing, short-ranged wireless communication, spectroscopy, and weather forecasting.

Definition and relationship to the electromagnetic spectrum[edit]

Infrared radiation extends from the nominal red edge of the visible spectrum at 700 nanometers (nm)
Infrared radiation extends from the nominal red edge of the visible spectrum at 700 nanometers (nm)
to 1 mm. This range of wavelengths corresponds to afrequency range of approximately
430 THz down to 300 GHz. Below infrared is the microwave portion of the electromagnetic
spectrum.
Infrared in relation to electromagnetic spectrum
Light comparison [9]
Name
Wavelength
Frequency (Hz)
Photon Energy (eV)
Gamma ray
X-ray
Ultraviolet
less than 0.01 nm
0.01 nm – 10 nm
10 nm – 380 nm
more than 30 EHz
30 EHz – 30 PHz
30 PHz – 790 THz
124 keV – 300+ GeV
124 eV – 124 keV
3.3 eV – 124 eV

380 nm–700 nm

790 THz – 430 THz

1.7 eV – 3.3 eV

 

Infrared

700 nm – 1 mm

430 THz – 300 GHz

1.24 meV – 1.7 eV

1 mm – 1 meter

300 GHz – 300 MHz

1.7 eV – 1.24 meV

1 mm – 100,000 km

12.4 feV – 1.24 meV

Natural infrared[edit]

Sunlight, at an effective temperature of 5,780 kelvins, is composed of nearly thermal-spectrum radiation that is slightly more than half infrared. At zenith, sunlight provides an irradiance of just over 1 kilowatt per square meter at sea level. Of this energy, 527 watts is infrared radiation, 445 watts is visible light, and 32 watts isultraviolet radiation. [10]

On the surface of Earth, at far lower temperatures than the surface of the Sun, almost all thermal radiation consists of infrared in various wavelengths. Of these natural thermal radiation processes only lightning and natural fires are hot enough to produce much visible energy, and fires produce far more infrared than visible-light energy.

Regions within the infrared[edit]

In general, objects emit infrared radiation across a spectrum of wavelengths, but sometimes only a limited region of the spectrum is of interest because sensors usually collect radiation only within a specific bandwidth. Thermal infrared radiation also has a maximum emission wavelength, which is inversely proportional to the absolute temperature of object, in accordance with Wien's displacement law.

Therefore, the infrared band is often subdivided into smaller sections.

Commonly used sub-division scheme[edit]

A commonly used sub-division scheme is: [11]

Division Nam

 

Wavelengt

Frequenc

Photon Energ

 

e

Abbreviation

h

y

y

Characteristics

 

NIR, IR-

0.75–1.4 µ

214-400 T

 

Defined by the water absorption, and commonly used in fiber optictelecommunication because of low attenuation losses in the SiO 2 glass

Near-infrared

A DIN

m

Hz

886-1653 meV

(silica) medium. Image intensifiers are sensitive to this area of the spectrum. Examples include night vision devices such as night vision goggles.

Short-

SWIR, IR-

1.4-3 µm

100-214 T

413-886 meV

Water absorption increases

wavelength

significantly at 1,450 nm.

infrared

B DIN

 

Hz

 

The 1,530 to 1,560 nm range is the dominant spectral region for long- distance telecommunications.

 

MWIR, IR-

     

In guided missile technology the 3–5 µm portion of this band is the atmospheric window in which the homing heads of passive IR 'heat seeking'

C

DIN;

missiles are designed to

Mid-

wavelength

infrared

MidIR. [12] Also called intermediate infrared (IIR)

3–8 µm

37-100 TH

z

155–413 meV

work, homing on to the Infrared signature of the target aircraft, typically the jet engine exhaust plume. This region is known as thermal infrared, but it detects only temperatures somewhat above body temperature.

Long-

       

The "thermal imaging" region, in which sensors can obtain a completely passive image of objects only slightly higher in temperature than room

wavelength

infrared

LWIR, IR-

C

DIN

8–15 µm

20-37 THz

83–155 meV

temperature - for example, the human body - based on thermal emissions only and requiring no illumination such as the sun, moon, or infrared illuminator. This region is also called the "thermal infrared."

   

15–1,000 µ

0.3-20 TH

 

(see also far-infrared

Far-infrared

FIR

m

z

1.2–83 meV

NIR and SWIR is sometimes called "reflected infrared," whereas MWIR and LWIR is sometimes referred to as "thermal infrared." Due to the nature of the blackbody radiation curves, typical 'hot' objects, such as exhaust pipes, often appear brighter in the MW compared to the same object viewed in the LW.

CIE division scheme[edit]

The International Commission on Illumination (CIE) recommended the division of infrared radiation into the following three bands: [13]

IR-A: 700 nm – 1400 nm (0.7 µm – 1.4 µm, 215 THz – 430 THz)

IR-B: 1400 nm – 3000 nm (1.4 µm – 3 µm, 100 THz – 215 THz)

IR-C: 3000 nm – 1 mm (3 µm – 1000 µm, 300 GHz – 100 THz)

ISO 20473 scheme[edit]

ISO 20473 specifies the following scheme: [14]

Designation

Abbreviation

Wavelength

Near-Infrared

NIR

0.78–3 µm

Mid-Infrared

MIR

3–50 µm

Far-Infrared

FIR

50–1000 µm

Astronomy division scheme[edit]

 

Astronomers typically divide the infrared spectrum as follows: [15]

Designation

Abbreviation

Wavelength

Near-Infrared

NIR

(0.7–1) to 5 µm

Mid-Infrared

MIR

5 to (25–40) µm

Far-Infrared

FIR

(25–40) to (200–350) µm.

These divisions are not precise and can vary depending on the publication. The three regions are used for observation of different temperature ranges, and hence different environments in space.

A photometric system used in astronomy allocates letters to different spectral regions according to filters used; JHK is a frequent set for the near-infrared, and this set of letters appears in the titles of many papers.

Sensor response division scheme[edit]

Plot of atmospheric transmittance in part of the infrared region.

Plot of atmospheric transmittance in part of the infrared region.

A third scheme divides up the band based on the response of various detectors: [16]

Near-infrared: from 0.7 to 1.0 µm (from the approximate end of the response of the human eye to that of silicon).

Short-wave infrared: 1.0 to 3 µm (from the cut-off of silicon to that of the MWIR atmospheric window). InGaAs covers to about 1.8 µm; the less sensitive lead salts cover this region.

Mid-wave infrared: 3 to 5 µm (defined by the atmospheric window and covered by Indium antimonide [InSb] and HgCdTeand partially by lead selenide [PbSe]).

Long-wave infrared: 8 to 12, or 7 to 14 µm (this is the atmospheric window covered by HgCdTe and microbolometers).

Very-long wave infrared (VLWIR) (12 to about 30 µm, covered by doped silicon).

Near-infrared is the region closest in wavelength to the radiation detectable by the human eye, mid- and far-infrared are progressively further from the visible spectrum. Other definitions follow different physical mechanisms (emission peaks, vs. bands, water absorption) and the newest follow technical reasons (the common silicon detectors are sensitive to about 1,050 nm, while InGaAs's sensitivity starts around 950 nm and ends between 1,700 and 2,600 nm, depending on the specific configuration). Unfortunately, international standards for these specifications are not currently available.

The onset of infrared is defined (according to different standards) at various values typically between 700 nm and 800 nm, but the boundary between visible and infrared light is not precisely defined. The human eye is markedly less sensitive to light above 700 nm wavelength, so longer wavelengths make insignificant contributions to scenes illuminated by common light sources. However, particularly intense near-IR light (e.g., from IR lasers, IR LED sources, or from bright daylight with the visible light removed by colored gels) can be detected up to approximately 780 nm, and will be perceived as red light. Sources providing wavelengths as long as 1050 nm can be seen as a dull red glow in intense sources, causing some difficulty in near-IR illumination of scenes in the dark (usually this practical problem is solved by indirect illumination). Leaves are particularly bright in the near IR, and if all visible light leaks from around an IR-filter are blocked, and the eye is given a moment to adjust to the extremely dim image coming through a visually opaque IR-passing photographic filter, it is possible to see the Wood effect that consists of IR-glowing foliage. [17]

Telecommunication bands in the infrared[edit]

In optical communications, the part of the infrared spectrum that is used is divided into seven bands based on availability of light sources transmitting/absorbing materials (fibers) and detectors: [18]

 

Band

Descriptor

Wavelength range

O band

Original

1260–1360 nm

E band

Extended

1360–1460 nm

S band

Short wavelength

1460–1530 nm

C

band

Conventional

1530–1565 nm

L

band

Long wavelength

1565–1625 nm

U band

Ultralong wavelength

1625–1675 nm

The C-band is the dominant band for long-distance telecommunication networks. The S and L bands are based on less well established technology, and are not as widely deployed.

Heat[edit]

Main article: Thermal radiation

Materials with higher <a href=emissivity a ppear to be hotter. In this thermal image, the ceramic cylinder appears to be hotter than its cubic container (made of silicon carbide), while in fact they have the same temperature. " id="pdf-obj-7-85" src="pdf-obj-7-85.jpg">

Materials with higher emissivityappear to be hotter. In this thermal image, the ceramic cylinder appears to be hotter than its cubic container (made of silicon carbide), while in fact they have the same temperature.

Infrared radiation is popularly known as "heat radiation" [citation needed] , but light and electromagnetic waves of any frequency will heat surfaces that absorb them. Infrared light from the Sun accounts for 49% [19] of the heating of Earth, with the rest being caused by visible light that is absorbed then re- radiated at longer wavelengths. Visible light or ultraviolet-emittinglasers can char paper and incandescently hot objects emit visible radiation. Objects at

room temperature will emit radiationconcentrated mostly in the 8 to 25 µm band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law). [20]

Heat is energy in transit that flows due to temperature difference. Unlike heat transmitted by thermal conduction or thermal convection, thermal radiation can propagate through a vacuum. Thermal radiation is characterized by a particular spectrum of many wavelengths that is associated with emission from an object, due to the vibration of its molecules at a given temperature. Thermal radiation can be emitted from objects at any wavelength, and at very high temperatures such radiations are associated with spectra far above the infrared, extending into visible, ultraviolet, and even X-ray regions (i.e., the solar corona). Thus, the popular association of infrared radiation with thermal radiation is only a coincidence based on typical (comparatively low) temperatures often found near the surface of planet Earth.

The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface that describes how its thermal emissions deviate from the ideal of a black body. To further explain, two objects at the same physical temperature will not show the same infrared image if they have differing emissivity. For example, for any pre-set emissivity value, objects with higher emissivity will appear hotter, and those with a lower emissivity will appear cooler. For that reason, incorrect selection of emissivity will give inaccurate results when using infrared cameras and pyrometers.

Applications[edit]

room <a href=temperature will emit radiation c oncentrated mostly in the 8 to 25 µm band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law ). Heat is energy in transit that flows due to temperature difference. Unlike heat transmitted by thermal conduction or thermal convection , thermal radiation can propagate through a vacuum . Thermal radiation is characterized by a particular spectrum of many wavelengths that is associated with emission from an object, due to the vibration of its molecules at a given temperature. Thermal radiation can be emitted from objects at any wavelength, and at very high temperatures such radiations are associated with spectra far above the infrared, extending into visible, ultraviolet, and even X-ray regions (i.e., the solar corona ) . Thus, the popular association of infrared radiation with thermal radiation is only a coincidence based on typical (comparatively low) temperatures often found near the surface of planet Earth. The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface that describes how its thermal emissions deviate from the ideal of a black body . To further explain, two objects at the same physical temperature will not show the same infrared image if they have differing emissivity. For example, for any pre-set emissivity value, objects with higher emissivity will appear hotter, and those with a lower emissivity will appear cooler. For that reason, incorrect selection of emissivity will give inaccurate results when using infrared cameras and pyrometers. Applications [ edit ] This section needs additional citations for verification . Please help improve this article by adding citations to reliable sources . Unsourced material may be challenged and removed. (August 2007) Night vision [ edit ] Main article: Night vision " id="pdf-obj-8-38" src="pdf-obj-8-38.jpg">

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and

removed. (August 2007)

Night vision[edit]

Main article: Night vision

room <a href=temperature will emit radiation c oncentrated mostly in the 8 to 25 µm band, but this is not distinct from the emission of visible light by incandescent objects and ultraviolet by even hotter objects (see black body and Wien's displacement law ). Heat is energy in transit that flows due to temperature difference. Unlike heat transmitted by thermal conduction or thermal convection , thermal radiation can propagate through a vacuum . Thermal radiation is characterized by a particular spectrum of many wavelengths that is associated with emission from an object, due to the vibration of its molecules at a given temperature. Thermal radiation can be emitted from objects at any wavelength, and at very high temperatures such radiations are associated with spectra far above the infrared, extending into visible, ultraviolet, and even X-ray regions (i.e., the solar corona ) . Thus, the popular association of infrared radiation with thermal radiation is only a coincidence based on typical (comparatively low) temperatures often found near the surface of planet Earth. The concept of emissivity is important in understanding the infrared emissions of objects. This is a property of a surface that describes how its thermal emissions deviate from the ideal of a black body . To further explain, two objects at the same physical temperature will not show the same infrared image if they have differing emissivity. For example, for any pre-set emissivity value, objects with higher emissivity will appear hotter, and those with a lower emissivity will appear cooler. For that reason, incorrect selection of emissivity will give inaccurate results when using infrared cameras and pyrometers. Applications [ edit ] This section needs additional citations for verification . Please help improve this article by adding citations to reliable sources . Unsourced material may be challenged and removed. (August 2007) Night vision [ edit ] Main article: Night vision " id="pdf-obj-8-61" src="pdf-obj-8-61.jpg">

Active-infrared night vision : the camera illuminates the scene at infrared wavelengths invisible to thehuman eye. Despite a dark back-lit scene, active-infrared night vision delivers identifying details, as seen on the display monitor.

Infrared is used in night vision equipment when there is insufficient visible light to see. [21] Night vision devices operate through a process involving the conversion of ambient light photons into electrons that are then amplified by a chemical and electrical process and then converted back into visible light. [21] Infrared light sources can be used to augment the available ambient light for conversion by night vision devices, increasing in-the-dark visibility without actually using a visible light source. [21]

The use of infrared light and night vision devices should not be confused with thermal imaging, which creates images based on differences in surface temperature by detecting infrared radiation (heat) that emanates from objects and their surrounding environment. [22]

Thermography[edit]

Thermography helped to determine the temperature profile of th <a href=e Space Shuttle thermal protection system during re-entry. " id="pdf-obj-9-35" src="pdf-obj-9-35.jpg">

Thermography helped to determine the temperature profile of theSpace Shuttle thermal protection system during re-entry.

Main article: Thermography

Infrared radiation can be used to remotely determine the temperature of objects (if the emissivity is known). This is termed thermography, or in the case of very hot objects in the NIR or visible it is termed pyrometry. Thermography (thermal imaging) is mainly used in military and industrial applications but the technology is reaching the public market in the form of infrared cameras on cars due to the massively reduced production costs.

Thermographic cameras detect radiation in the infrared range of the electromagnetic spectrum (roughly 900–14,000 nanometers or 0.9–14 μm) and produce images of that radiation. Since infrared radiation is emitted by all objects based on their temperatures, according to the black body radiation law, thermography makes it possible to "see" one's environment with or without visible illumination. The amount of radiation emitted by an object increases with temperature, therefore thermography allows one to see variations in temperature (hence the name).

Hyperspectral imaging[edit]

Main article: Hyperspectral imaging

Active-infrared night vision : the camera illuminates the scene at infrared wavelengths invisible to th <ae human eye . Despite a dark back-lit scene, active-infrared night vision delivers identifying details, as seen on the display monitor. Infrared is used in night vision equipment when there is insufficient visible light to see. Night vision devices operate through a process involving the conversion of ambient light photons into electrons that are then amplified by a chemical and electrical process and then converted back into visible light. Infrared light sources can be used to augment the available ambient light for conversion by night vision devices, increasing in-the-dark visibility without actually using a visible light source. The use of infrared light and night vision devices should not be confused with thermal imaging , which creates images based on differences in surface temperature by detecting infrared radiation ( heat ) that emanates from objects and their surrounding environment. Thermography [ edit ] Thermography helped to determine the temperature profile of th e Space Shuttle thermal protection system during re-entry. Main article: Thermography Infrared radiation can be used to remotely determine the temperature of objects (if the emissivity is known). This is termed thermography, or in the case of very hot objects in the NIR or visible it is termed pyrometry . Thermography (thermal imaging) is mainly used in military and industrial applications but the technology is reaching the public market in the form of infrared cameras on cars due to the massively reduced production costs. Thermographic cameras detect radiation in the infrared range of the electromagnetic spectrum (roughly 900–14,000 nanometers or 0.9–14 μm) and produce images of that radiation. Since infrared radiation is emitted by all objects based on their temperatures, according to the black body radiation law, thermography makes it possible to "see" one's environment with or without visible illumination. The amount of radiation emitted by an object increases with temperature, therefore thermography allows one to see variations in temperature (hence the name). Hyperspectral imaging [ edit ] Main article: Hyperspectral imaging " id="pdf-obj-9-63" src="pdf-obj-9-63.jpg">

Hyperspectral thermal infraredemission measurement, an outdoor scan in winter conditions, ambient temperature −15 °C, image produced with a Specim LWIR hyperspectral imager. Relative radiance spectra from various targets in the image are shown with arrows. The infrared spectra of the different objects such as the watch clasp have clearly distinctive characteristics. The contrast level indicates the temperature of the object. [23]

Hyperspectral thermal infrared <a href=emission measurement, an outdoor scan in winter conditions, ambient temperature −15 °C, image produced with a Specim LWIR hyperspectral imager. Relative radiance spectra from various targets in the image are shown with arrows. The infrared spectra of the different objects such as the watch clasp have clearly distinctive characteristics. The contrast level indicates the temperature of the object. Infrared light from the LED of a remote control as recorded by a digital camera. " id="pdf-obj-10-13" src="pdf-obj-10-13.jpg">

Infrared light from the LED of aremote control as recorded by a digital camera.

A hyperspectral image, a basis for chemical imaging, is a "picture" containing continuous spectrum through a wide spectral range. Hyperspectral imaging is gaining importance in the applied spectroscopy particularly in the fields of NIR, SWIR, MWIR, and LWIR spectral regions. Typical applications include biological, mineralogical, defence, and industrial measurements.

Thermal Infrared Hyperspectral Camera can be applied similarly to a Thermographic camera, with the fundamental difference that each pixel contains a full LWIR spectrum. Consequently, chemical identification of the object can be performed without a need for an external light source such as the Sun or the Moon. Such cameras are typically applied for geological measurements, outdoor surveillance andUAV applications. [24]

Other imaging[edit]

In infrared photography, infrared filters are used to capture the near-infrared spectrum. Digital cameras often use infraredblockers. Cheaper digital cameras and camera phones have less effective filters and can "see" intense near-infrared, appearing as a bright purple-white color. This is especially pronounced when taking pictures of subjects near IR-bright areas (such as near a lamp), where the resulting infrared interference can wash out the image. There is also a technique called 'T- ray' imaging, which is imaging usingfar-infrared or terahertz radiation. Lack of bright sources can make terahertz photography more challenging than most other infrared imaging techniques. Recently T-ray imaging has been of considerable interest due to a number of new developments such as terahertz time-domain spectroscopy.

Reflected light photograph in various infrared spectra to illustrate the appearance as the wavelength of light

Reflected light photograph in various infrared spectra to illustrate the appearance as the wavelength of light changes.

Tracking[edit]

Main article: Infrared homing

Infrared tracking, also known as infrared homing, refers to a passive missile guidance system, which uses the emission from a target of electromagnetic radiation in the infrared part of the spectrum to track it. Missiles that use infrared seeking are often referred to as "heat-seekers", since infrared (IR) is just below the visible spectrum of light in frequency and is radiated strongly by hot bodies. Many objects such as people, vehicle engines, and aircraft generate and retain heat, and as such, are especially visible in the infrared wavelengths of light compared to objects in the background. [25]

Heating[edit]

Main article: Infrared heating

Main article: <a href=Infrared homing Infrared tracking, also known as infrared homing, refers to a passive missile guidance system , which uses the emission from a target of electromagnetic radiation in the infrared part of the spectrum to track it. Missiles that use infrared seeking are often referred to as "heat-seekers", since infrared (IR) is just below the visible spectrum of light in frequency and is radiated strongly by hot bodies. Many objects such as people, vehicle engines, and aircraft generate and retain heat, and as such, are especially visible in the infrared wavelengths of light compared to objects in the background. Heating [ edit ] Main article: Infrared heating This section does not cite any references or sources . Please help improve this section by adding citations to reliable sources . Unsourced material may be challenged and removed . (November 2013) Infrared radiation can be used as a deliberate heating source. For example, it is used in infrared saunas to heat the occupants. It may also be used in other heating applications, such as to remove ice from the wings of aircraft (de-icing). Infrared can be used in cooking and heating food as it predominantly heats the opaque, absorbent objects, rather than the air around them. Infrared heating is also becoming more popular in industrial manufacturing processes, e.g. curing of coatings, forming of plastics, annealing, plastic welding, and print drying. In these applications, infrared heaters replace convection ovens and contact heating. Efficiency is achieved by matching the wavelength of the infrared heater to the absorption characteristics of the material. Communications [ edit ] IR data transmission is also employed in short-range communication among computer peripherals and personal digital assistants . These devices usually conform to standards published by IrDA , the Infrared Data Association. Remote controls and IrDA devices use infrared light-emitting diodes (LEDs) to emit infrared radiation that is focused by a plastic lens into a narrow beam. The beam is modulated , i.e. switched on and off, to encode the data . The receiver uses a silicon photodiode to convert the infrared radiation to an electric current . It responds only to the rapidly pulsing signal created by the transmitter, and filters out slowly changing infrared radiation from ambient light. Infrared communications are useful for indoor use in areas of high population density. IR does not penetrate walls and so does not interfere with other devices in adjoining rooms. Infrared is the most common way for remote controls to command appliances. Infrared remote control protocols lik e RC-5 , SIRC , are used to communicate with infrared. Free space optical communication using infrared lasers can be a relatively inexpensive way to install a communications link in an urban area operating at up to 4 gigabit/s, compared to the cost of burying fiber optic cable. Infrared lasers are used to provide the light for optical fiber communications systems. Infrared light with a wavelength around 1,330 nm (least dispersion ) or 1,550 nm (best transmission) are the best choices for standard silica fibers. IR data transmission of encoded audio versions of printed signs is being researched as an aid for visually impaired people through the RIAS (Remote Infrared Audible Signage) project. Spectroscopy [ edit ] Infrared vibrational spectroscopy (see also near-infrared spectroscopy ) is a technique that can be used to identify molecules by analysis of their constituent bonds. Each chemical bond in a molecule vibrates at a frequency characteristic of that bond. A group of atoms in a molecule (e.g., CH ) may have multiple modes of oscillation caused by the stretching and bending motions of the group as a " id="pdf-obj-11-24" src="pdf-obj-11-24.jpg">

This section does not cite any references or sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged

and removed. (November 2013)

Infrared radiation can be used as a deliberate heating source. For example, it is used in infrared saunas to heat the occupants. It may also be used in other heating applications, such as to remove ice from the wings of aircraft (de-icing). [26] Infrared can be used in cooking and heating food as it predominantly heats the opaque, absorbent objects, rather than the air around them.

Infrared heating is also becoming more popular in industrial manufacturing processes, e.g. curing of coatings, forming of plastics, annealing, plastic welding, and print drying. In these applications, infrared heaters replace convection ovens and contact heating.

Efficiency is achieved by matching the wavelength of the infrared heater to the absorption characteristics of the material.

Communications[edit]

IR data transmission is also employed in short-range communication among computer peripherals and personal digital assistants. These devices usually conform to standards published by IrDA, the Infrared Data Association. Remote controls and IrDA devices use infrared light-emitting diodes (LEDs) to emit infrared radiation that is focused by a plastic lens into a narrow beam. The beam is modulated, i.e. switched on and off, to encode the data. The receiver uses a silicon photodiode to convert the infrared radiation to an electric current. It responds only to the rapidly pulsing signal created by the transmitter, and filters out slowly changing infrared radiation from ambient light. Infrared communications are useful for indoor use in areas of high population density. IR does not penetrate walls and so does not interfere with other devices in adjoining rooms. Infrared is the most common way for remote controls to command appliances. Infrared remote control protocols likeRC-5, SIRC, are used to communicate with infrared.

Free space optical communication using infrared lasers can be a relatively inexpensive way to install a communications link in an urban area operating at up to 4 gigabit/s, compared to the cost of burying fiber optic cable.

Infrared lasers are used to provide the light for optical fiber communications systems. Infrared light with a wavelength around 1,330 nm (least dispersion) or 1,550 nm (best transmission) are the best choices for standard silica fibers.

IR data transmission of encoded audio versions of printed signs is being researched as an aid for visually impaired people through the RIAS (Remote Infrared Audible Signage) project.

Spectroscopy[edit]

Infrared vibrational spectroscopy (see also near-infrared spectroscopy) is a technique that can be used to identify molecules by analysis of their constituent bonds. Each chemical bond in a molecule vibrates at a frequency characteristic of that bond. A group of atoms in a molecule (e.g., CH 2 ) may have multiple modes of oscillation caused by the stretching and bending motions of the group as a

whole. If an oscillation leads to a change in dipole in the molecule then it will absorb aphoton that has the same frequency. The vibrational frequencies of most molecules correspond to the frequencies of infrared light. Typically, the technique is used to study organic compounds using light radiation from 4000–400 cm 1 , the mid-infrared. A spectrum of all the frequencies of absorption in a sample is recorded. This can be used to gain information about the sample composition in terms of chemical groups present and also its purity (for example, a wet sample will show a broad O-H absorption around 3200 cm 1 ).

Thin film metrology[edit]

In the semiconductor industry, infrared light can be used to characterize materials such as thin films and periodic trench structures. By measuring the reflectance of light from the surface of a semiconductor wafer, the index of refraction (n) and the extinction Coefficient (k) can be determined via the Forouhi-Bloomer dispersion equations. The reflectance from the infrared light can also be used to determine the critical dimension, depth, and sidewall angle of high aspect ratio trench structures.

Meteorology[edit]

IR Satellite picture taken 1315 Z on 15th October 2006. A <a href=frontal system can be seen in the Gulf of Mexico with embedded Cumulonimbus cloud. Shallower Cumulus and Stratocumulus can be seen off the Eastern Seaboard . " id="pdf-obj-12-30" src="pdf-obj-12-30.jpg">

IR Satellite picture taken 1315 Z on 15th October 2006. A frontal system can be seen in the Gulf of Mexico with embedded Cumulonimbus cloud. Shallower Cumulus and Stratocumulus can be seen off the Eastern Seaboard.

Weather satellites equipped with scanning radiometers produce thermal or infrared images, which can then enable a trained analyst to determine cloud heights and types, to calculate land and surface water temperatures, and to locate ocean surface features. The scanning is typically in the range 10.3–12.5 µm (IR4 and IR5 channels).

High, cold ice clouds such as Cirrus or Cumulonimbus show up bright white, lower warmer clouds such as Stratus orStratocumulus show up as grey with intermediate clouds shaded accordingly. Hot land surfaces will show up as dark-grey or black. One disadvantage of infrared imagery is that low cloud such as stratus or fog can be a similar temperature to the surrounding land or sea surface and does not show up. However, using the difference in brightness of the IR4 channel (10.3–11.5 µm) and the near-infrared channel (1.58–1.64 µm), low cloud can be distinguished, producing a fog satellite picture. The main advantage of infrared is that images can be produced at night, allowing a continuous sequence of weather to be studied.

These infrared pictures can depict ocean eddies or vortices and map currents such as the Gulf Stream, which are valuable to the shipping industry. Fishermen and farmers are interested in knowing land and water temperatures to protect their crops against frost or increase their catch from the sea. Even El Niño phenomena can be spotted. Using color-digitized techniques, the gray-shaded thermal images can be converted to color for easier identification of desired information.

The main water vapour channel at 6.40 to 7.08 µm can be imaged by some weather satellites and shows the amount of moisture in the atmosphere.

Climatology[edit]

In the field of climatology, atmospheric infrared radiation is monitored to detect trends in the energy exchange between the earth and the atmosphere. These trends provide information on long-term changes in Earth's climate. It is one of the primary parameters studied in research into global warming, together with solar radiation.

A pyrgeometer is utilized in this field of research to perform continuous outdoor measurements. This is a broadband infrared radiometer with sensitivity for infrared radiation between approximately 4.5 µm and 50 µm.

Astronomy[edit]

<a href=Beta Pictoris , the light-blue dot off-center, as seen in infrared. It combines two images, the inner disc is at 3.6 µm. " id="pdf-obj-13-29" src="pdf-obj-13-29.jpg">

Beta Pictoris, the light-blue dot off-center, as seen in infrared. It combines two images, the inner disc is at 3.6 µm.

Astronomers observe objects in the infrared portion of the electromagnetic spectrum using optical components, including mirrors, lenses and solid state digital detectors. For this reason it is classified as part of optical astronomy. To form an image, the components of an infrared telescope need to be carefully shielded from heat sources, and the detectors are chilled using liquid helium.

The sensitivity of Earth-based infrared telescopes is significantly limited by water vapor in the atmosphere, which absorbs a portion of the infrared radiation arriving from space outside of selected atmospheric windows. This limitation can be partially alleviated by placing the telescope observatory at a high altitude, or by carrying the telescope aloft with a balloon or an aircraft. Space telescopes do not suffer from this handicap, and so outer space is considered the ideal location for infrared astronomy.

The infrared portion of the spectrum has several useful benefits for astronomers. Cold, dark molecular clouds of gas and dust in our galaxy will glow with radiated heat as they are irradiated by imbedded stars. Infrared can also be used to detectprotostars before they begin to emit visible light. Stars emit a smaller portion of their energy in the infrared spectrum, so nearby cool objects such as planets can be more readily detected. (In the visible light spectrum, the glare from the star will drown out the reflected light from a planet.)

Infrared light is also useful for observing the cores of active galaxies, which are often cloaked in gas and dust. Distant galaxies with a high redshift will have the peak portion of their spectrum shifted toward longer wavelengths, so they are more readily observed in the infrared. [8]

Art conservation and analysis[edit]

<a href=The Arnolfini Portrait by Jan van Eyck , National Gallery, London " id="pdf-obj-14-3" src="pdf-obj-14-3.jpg">
<a href=The Arnolfini Portrait by Jan van Eyck , National Gallery, London Infrared reflectography ( fr ; it ; es ) , as called by art conservators, can be applied to paintings to reveal underlying layers in a completely non-destructive manner, in particular the underdrawing or outline drawn by the artist as a guide. This often reveals the artist's use of carbon black , which shows up well in reflectograms, as long as it has not also been used in the ground underlying the whole painting. Art conservators are looking to see whether the visible layers of paint differ from the underdrawing or layers in between – such alterations are called pentimenti when made by the original artist. This is very useful information in deciding whether a painting is the prime version by the original artist or a copy, and whether it has been altered by over-enthusiastic restoration work. In general, the more pentimenti the more likely a painting is to be the prime version. It also gives useful insights into working practices. Among many other changes in the Arnolfini Portrait of 1434 (left), the man's face was originally higher by about the height of his eye; the woman's was higher, and her eyes looked more to the " id="pdf-obj-14-11" src="pdf-obj-14-11.jpg">

Infrared reflectography (fr; it; es), as called by art conservators, [27] can be applied to paintings to reveal underlying layers in a completely non-destructive manner, in particular the underdrawing or outline drawn by the artist as a guide. This often reveals the artist's use of carbon black, which shows up well in reflectograms, as long as it has not also been used in the ground underlying the whole painting. Art conservators are looking to see whether the visible layers of paint differ from the underdrawing or layers in between – such alterations are called pentimenti when made by the original artist. This is very useful information in deciding whether a painting is the prime version by the original artist or a copy, and whether it has been altered by over-enthusiastic restoration work. In general, the more pentimenti the more likely a painting is to be the prime version. It also gives useful insights into working practices. [28]

Among many other changes in the Arnolfini Portrait of 1434 (left), the man's face was originally higher by about the height of his eye; the woman's was higher, and her eyes looked more to the

front. Each of his feet was underdrawn in one position, painted in another, and then overpainted in a third. These alterations are seen in infrared reflectograms. [29]

Similar uses of infrared are made by conservators and scientists on various types of objects, especially very old written documents such as the Dead Sea Scrolls, the Roman works in the Villa of the Papyri, and the Silk Road texts found in the Dunhuang Caves. [30] Carbon black used in ink can show up extremely well.

Biological systems[edit]

Thermographic image of a snake eating a mouse Thermographic image of a <a href=fruit bat . " id="pdf-obj-15-24" src="pdf-obj-15-24.jpg">

Thermographic image of a snake eating a mouse

Thermographic image of a snake eating a mouse Thermographic image of a <a href=fruit bat . " id="pdf-obj-15-28" src="pdf-obj-15-28.jpg">

Thermographic image of a fruit bat.

The pit viper has a pair of infrared sensory pits on its head. There is uncertainty regarding the exact thermal sensitivity of this biological infrared detection system. [31][32]

Other organisms that have thermoreceptive organs are pythons (family Pythonidae), some boas (family Boidae), theCommon Vampire Bat (Desmodus rotundus), a variety of jewel beetles (Melanophila acuminata), [33] darkly pigmented butterflies (Pachliopta aristolochiae and Troides rhadamantus plateni), and possibly blood-sucking bugs (Triatoma infestans). [34]

Although near-infrared vision (780–1000 nm) has long been deemed impossible due to noise in visual pigments, [35] sensation of near-infrared light was reported in the common carp and in three cichlid species. [35][36][37][38][39] Fish use NIR to capture prey [35] and for phototactic swimming orientation. [39] NIR sensation in fish may be relevant under poor lighting conditions during twilight [35] and in turbid surface waters. [39]

Photobiomodulation[edit]

Near-infrared light, or photobiomodulation, is used for treatment of chemotherapy-induced oral ulceration as well as wound healing. There is some work relating to anti-herpes virus treatment. [40] Research projects include work on central nervous system healing effects via cytochrome c oxidase upregulation and other possible mechanisms. [41]

Health hazard[edit]

Strong infrared radiation in certain industry high-heat settings may be hazardous to the eyes, resulting in damage or blindness to the user. Since the radiation is invisible, special IR-proof goggles must be worn in such places. [42]

Earth as an infrared emitter[edit]

Schematic of the <a href=greenhouse effect " id="pdf-obj-16-11" src="pdf-obj-16-11.jpg">

Schematic of the greenhouse effect

Earth's surface and the clouds absorb visible and invisible radiation from the sun and re-emit much of the energy as infrared back to atmosphere. Certain substances in the atmosphere, chiefly cloud droplets andwater vapor, but also carbon dioxide, methane, nitrous oxide, sulfur hexafluoride, andchlorofluorocarbons, [43] absorb this infrared, and re-radiate it in all directions including back to Earth. Thus, the greenhouse effect keeps the atmosphere and surface much warmer than if the infrared absorbers were absent from the atmosphere. [44]

History of infrared science[edit]

Strong infrared radiation in certain industry high-heat settings may be hazardous to the eyes, resulting in Earth as an infrared emitter [ edit ] Schematic of the greenhouse effect Earth ' s surface and the clouds absorb visible and invisible radiation from the sun and re-emit much of the energy as infrared back to atmosphere . Certain substances in the atmosphere, chiefly cloud droplets an d water vapor, but also carbon dioxide , methane , nitrous oxide , sulfur hexafluoride , and chlorofluorocarbons , absorb this infrared, and re-radiate it in all directions including back to Earth. Thus, the greenhouse effect keeps the atmosphere and surface much warmer than if the infrared absorbers were absent from the atmosphere. History of infrared science [ edit ] This article needs additional citations for verification . Please hel p improve this article by adding citations to reliable sources . Unsourced material may be challenged and removed. (July 2006) The discovery of infrared radiation is ascribed to William Herschel , the astronomer , in the early 19th century. Herschel published his results in 1800 before the Royal Society of London . Herschel used a prism to refract light from the sun and detected the infrared, beyond the red part of the spectrum, through an increase in the temperature recorded on a thermometer . He was surprised at the result and called them "Calorific Rays". The term 'Infrared' did not appear until late in the 19th century. Other important dates include: " id="pdf-obj-16-49" src="pdf-obj-16-49.jpg">

This article needs additional citations for verification. Please helpimprove this article by adding citations to reliable sources. Unsourced material may be challenged and

removed. (July 2006)

The discovery of infrared radiation is ascribed to William Herschel, the astronomer, in the early 19th century. Herschel published his results in 1800 before the Royal Society of London. Herschel used aprism to refract light from the sun and detected the infrared, beyond the red part of the spectrum, through an increase in the temperature recorded on a thermometer. He was surprised at the result and called them "Calorific Rays". The term 'Infrared' did not appear until late in the 19th century. [45][46]

Other important dates include: [16]

Infrared radiation was discovered in 1800 by William Herschel.

Infrared radiation was discovered in 1800 by William Herschel.

1737: Émilie du Châtelet predicted what is today known as infrared radiation in Dissertation sur la nature et la propagation du feu.

1835: Macedonio Melloni made the first thermopile IR detector.

1840: John Herschel produces the first thermal image thermogram.

1860: Gustav Kirchhoff formulated the blackbody theorem

.
.

1873: Willoughby Smith discovered the photoconductivity of selenium.

1879: Stefan-Boltzmann law formulated empirically that the power radiated by a blackbody is proportional to T 4 .

1880s & 1890s: Lord Rayleigh and Wilhelm Wien solved part of the blackbody equation, but both solutions diverged in parts of the electromagnetic spectrum. This problem was called the "Ultraviolet catastrophe and Infrared Catastrophe".

1901: Max Planck published the blackbody equation and theorem. He solved the problem by quantizing the allowable energy transitions.

1905: Albert Einstein developed the theory of the photoelectric effect.

1917: Theodore Case developed the thallous sulfide detector; British scientist built the first infra-red search and track (IRST) device able to detect aircraft at a range of one mile (1.6 km).

1935: Lead salts – early missile guidance in World War II.

1938: Teau Ta – predicted that the pyroelectric effect could be used to detect infrared radiation.

1945: The Zielgerät 1229 "Vampir" infrared weapon system was introduced as the first portable infrared device for military applications.

1952: H. Welker grew synthetic InSb crystals.

1950s: Paul Kruse (at Honeywell) and Texas Instruments recorded infrared images.

1950s and 1960s: Nomenclature and radiometric units defined by Fred Nicodemenus, G.J. Zissis and R. Clark; Robert Clark Jones defined D*.

1958: W.D. Lawson (Royal Radar Establishment in Malvern) discovered IR detection properties of HgCdTe.

1958: Falcon and Sidewinder missiles were developed using infrared technology.

1961: J. Cooper demonstrated pyroelectric detection.

1964: W.G. Evans discovered infrared thermoreceptors in a pyrophile beetle. [33]

1965: First IR Handbook; first commercial imagers (Barnes, Agema {now part of FLIR Systems Inc.}; Richard Hudson's landmark text; F4 TRAM FLIR byHughes; phenomenology pioneered by Fred Simmons and A.T. Stair; U.S. Army's night vision lab formed (now Night Vision and Electronic Sensors Directorate(NVESD), and Rachets develops detection, recognition and identification modeling there.

1972: Common module program started by NVESD.

1978: Infrared imaging astronomy came of age, observatories planned, IRTF on Mauna Kea opened; 32 by 32 and 64 by 64 arrays produced using InSb,HgCdTe and other materials.

2013: On February 14 researchers developed a neural implant that gives rats the ability to sense infrared light which for the first time provides living creatureswith new abilities, instead of simply replacing or augmenting existing abilities. [47]

See also[edit]

References[edit]

Jump up ^ Reusch, William (1999). "Infrared Spectroscopy". Michigan State University. Retrieved 2006-10-27.

7.

11-07.

Jump up ^ Bryant, Lynn (2007-06-11). "How does thermal imaging

22.

Retrieved 2007-08-12.

..

43

..

02.

Tsukruk, V. V. (2002). "Biological Thermal Detection: Micromechanical

and Microthermal Properties of Biological Infrared

Receptors". Biomacromolecules 3 (1): 106–

  • 33. ^ Jump up to: a b Evans, W.G. (1966). "Infrared receptors

in Melanophila acuminata De Geer".Nature 202 (4928):

..

  • 34. Jump up ^ Campbell, Angela L.; Naik, Rajesh R.; Sowards, Laura; Stone, Morley O. (2002). "Biological infrared imaging and

sensing". Micrometre 33 (2): 211–225.doi:10.1016/S0968-

  • 35. ^ Jump up to: a b c d Meuthen, Denis; Rick, Ingolf P.; Thünken, Timo;

Baldauf, Sebastian A. (2012). "Visual prey detection by near-infrared

cues in a fish". Naturwissenschaften99 (12): 1063–

  • 36. Jump up ^ Endo, M.; Kobayashi R.; Ariga, K.; Yoshizaki, G. and

Takeuchi, T. (2002). "Postural control in tilapia under microgravity and

the near infrared irradiated conditions". Nippon Suisan

Gakkaish 68 (6): 887–892.doi:10.2331/suisan.68.887.

  • 37. Jump up ^ Kobayashi R.; Endo, M.; Yoshizaki, G. and Takeuchi, T. (2002). "Sensitivity of tilapia to infrared light measured using a rotating striped drum differs between two strains". Nippon Suisan Gakkaish 68 (5): 646–651. doi:10.2331/suisan.68.646.

  • 38. Jump up ^ Matsumoto, Taro; Kawamura, Gunzo (2005). "The eyes of the common carp and Nile tilapia are sensitive to near- infrared". Fisheries Science 71 (2): 350–355.doi:10.1111/j.1444- 2906.2005.00971.x.

  • 39. ^ Jump up to: a b c Shcherbakov, Denis; Knörzer, Alexandra; Hilbig,

Reinhard; Haas, Ulrich; Blum, Martin (2012). "Near-infrared orientation

of Mozambique tilapia Oreochromis mossambicus". Zoology 115 (4):

Transactions of the Royal Society of London 90: 284–

14 February 2013. Retrieved 14 February 2013.

External links[edit]

 

Find more about Infrared at Wikipedia's sister projects

<a href=Media from Commons " id="pdf-obj-23-35" src="pdf-obj-23-35.jpg">

Media from Commons

Infrared Data Association, a standards organization for infrared data interconnection

Infrared Waves: detailed explanation of infrared light. (NASA)

The thermographic's library, collection of thermogram

V

 T  E Electromagnetic spectrum ← higher frequencies     longer wavelengths →
T
E
Electromagnetic spectrum
← higher frequencies
longer wavelengths →
Gamma rays
X-rays
Ultraviolet
Visible
Infrared
Terahertz radiation
Microwave
Radio
Violet
Blue
Green
Visible (optical)
Yellow
Orange
Red
W band
V
band
Q band
K a band
K band
Microwaves
K u band
X
band
S band
C
band
L
band
Radio
EHF
SHF
UHF
VHF
HF
MF

This page was last modified on 12 October 2015, at 15:26.

Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

 <a href=Suomi  SvenskaTagalogதமிழТатарча/tatarçaతెలుగไทยTürkçeУкраїнськаودراەچرۇغيۇئ / UyghurcheTiếng ViệtWinarayשידיייי粵語Žemaitėška中文 Edit links  This page was last modified on 12 October 2015, at 15:26.  Text is available under the Creative Commons Attribution-ShareAlike License ; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy . Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. , a non-profit organization.  Privacy policyAbout WikipediaDisclaimersContact WikipediaDevelopersMobile view   " id="pdf-obj-28-167" src="pdf-obj-28-167.jpg">
 <a href=Suomi  SvenskaTagalogதமிழТатарча/tatarçaతెలుగไทยTürkçeУкраїнськаودراەچرۇغيۇئ / UyghurcheTiếng ViệtWinarayשידיייי粵語Žemaitėška中文 Edit links  This page was last modified on 12 October 2015, at 15