CAMECHO Android 11 Car Stereo Radio User Manual

: May 16, 2024
: CAMECHO

Table of Contents

Android 11 Car Stereo Radio
Product Specifications
Product Usage Instructions
1. Tips and Warnings
2. Safety Tips
3. Machine Reset

Android 11 Car Stereo Radio

Product Specifications

Product: Android Car Stereo
Compatible with: Opel Vauxhall
Power Supply: 12V vehicle-mounted power supply system
Grounding Wire: Required for installation
Email Customer Service: [email protected]

Product Usage Instructions

1. Tips and Warnings

In order to emphasize important information, please pay special
attention to the labels throughout the user manual. These labels
indicate important warnings and prompts.

2. Safety Tips

Before installation, read all instructions carefully. It is
recommended to have a car audio professional install the
machine.

This machine is designed for vehicle-mounted 12V power supply
systems with a grounding wire. Do not install this machine in a 24V
vehicle-mounted system as it may damage the machine.

Do not repair the power fuse without professional guidance.
Improper use of the fuse can cause damage to the machine and result
in a fire.

Watching videos or operating the machine while driving is
prohibited to avoid violating traffic rules and prevent unnecessary
accidents.

For safety and proper use, it is advised to have professionals
install, disassemble, or repair the machine. Contact your local
professional car audio store for more information.

Avoid placing the product in humid environments or water to
prevent electric shock, fire, or other damage.

Note: To prevent short circuit, turn off the car and disconnect
the ACC connected to B+ before installation.

3. Machine Reset

The machine must be reset in the following situations:

First use of the system before or after replacing the
battery
Machine function is not normal

To reset the machine:

Click “Restore Factory Settings” in the system settings
interface to restore the machine to its initial state.
Use a pointed object to press the RESET button on the panel or
click “System Reset” in the system settings. The machine will be
reset and turned off, returning to the factory initial state.

Note: Pressing the RESET button will result in the loss of time
and set values.

Installation

Refer to the figure above for three installation methods. Choose
one according to your actual situation. Alternatively, you can
reinstall the new radio using the installation method of the
original car radio.

FAQ (Frequently Asked Questions)

Q: Can I install this car stereo in a 24V vehicle?

A: No, this car stereo is only suitable for 12V vehicle-mounted

power supply systems. Installing it in a 24V vehicle may damage the
machine.

Q: Can I repair the power fuse myself?

A: It is not recommended to repair the power fuse without

professional guidance. Improper use may cause damage to the machine
and result in a fire. Contact a professional for assistance.

Q: Can I watch videos while driving?

A: No, watching videos or operating the machine while driving

is prohibited to avoid violating traffic rules and prevent
accidents.

Q: Can I install or repair the machine myself?

A: For safety and to avoid damage to the machine, it is advised

to have professionals install, disassemble, or repair the machine.
Contact your local professional car audio store for
assistance.

Q: Can I use the car stereo in a humid environment?

A: It is recommended to avoid placing the product in humid

environments or water to prevent electric shock, fire, or other
damage.

Android Car Stereo instruction (Picture for reference only)
For Opel Vauxhall
Content
Content…………………………………………………………………………………………………………………………………………… 1 [Customer]……………………………………………………………………………………………………………………………………….2 [Instructions for use]………………………………………………………………………………………………………………………… 2 1. Tips and warnings………………………………………………………………………………………………………………………….2 2. Safety Tips…………………………………………………………………………………………………………………………………… 3 [Installation]……………………………………………………………………………………………………………………………………. 4 [Wiring]……………………………………………………………………………………………………………………………………………4 1. Product Dimension………………………………………………………………………………………………………………………..5 2. Back interface diagram…………………………………………………………………………………………………………………..5 3. Harness……………………………………………………………………………………………………………………………………….. 6 4. Installation Steps………………………………………………………………………………………………………………………….. 7 5. Schematic diagram of reversing camera wiring………………………………………………………………………………… 9 6. Fixed machine……………………………………………………………………………………………………………………………..11 7. Suitable models………………………………………………………………………………………………………………………….. 11 8. Parameters………………………………………………………………………………………………………………………………… 12 [Introduction to basic functions]……………………………………………………………………………………………………….13 [Trouble Shooting]…………………………………………………………………………………………………………………………..27 [Carplay and Android Auto Connection]……………………………………………………………………………………………. 28 1.Wired Carplay Connection……………………………………………………………………………………………………………. 29 2. Wireless Carplay Connection……………………………………………………………………………………………………….. 32 3. If Wireless Carplay Connection Fail………………………………………………………………………………………………..35 4. Wired Android Auto Connection……………………………………………………………………………………………………40 5. Wireless Android Auto Connection………………………………………………………………………………………………..43 6. Video Link (just for reference)……………………………………………………………………………………………………….43
Customer Service Contact: [email protected]
1

[Customer] Dear Customer: Thanks for buy our car player, it is our honor and pleasure to server you to using our product. Before using this product, please read this manual very carefully and keep it properly. Your kindly feedback and support will prompt us to do the better. Thank you.
[Instructions for use] For the sake of your safety, please don’t watch the video while driving and operating a machine; Please dispatch the volume to clearly while driving to the voice to the outside world. Before operation, please read this manual and other manual system, understand the use of manual and machine related safety tips and warning signs, after reading in a readily accessible place for ready reference.
1. Pay attention to traffic safety in the first place. 2. If you meet difficulty in operating the system, please again after he parked his car in a safe place. 3. Don’t let children operate this machine, lest cause personal injury and damage to the machine. 4. Please follow the traffic rules when using satellite navigation function to drive. 5. Please do not ban the use of electronic equipment or it is forbidden to use open flame such as gas stations, brewery, strong electromagnetic interference region, otherwise may cause danger. 6. Don’t maintenance, installation of the machine itself. Under the condition of the plug do not install or repair the machine, by not trained in electronic equipment or vehicles accessories installation personnel or the lack of experience installation and maintenance of this machine is very dangerous. 7. Do not install the machine storage or in direct sunlight place, don’t put it in other harmful material environment, especially the LCD screen, if the installation of the LCD screen is in the air conditioner near the air duct, please keep cool and hot air blows directly to the machine, otherwise it may damage the machine, even on the bus or personal injury. 8. Please do not use some sharp objects painted screen, don’t use hard objects to press the screen, otherwise will cause damage to display or touch screen. 9. In order to guarantee the normal operation of the machine, and prevent the occurrence of fire or get an electric shock, please don’t expose machine in damp air, more can’t liquid drying machine.
1. Tips and warnings
In order to emphasize the important information in the user manual, please pay special attention to the label when you see. It indicates some important warning and prompt information.
2

2. Safety Tips
Please read all instructions before installation, and it is recommended that car audio professionals install the machine.
This machine is suitable for vehicle-mounted 12V power supply system (there must be a grounding wire), please do not install this machine in a 24V vehicle-mounted, otherwise it will damage the machine. Do not repair the power fuse without professional guidance. Improper use of the fuse will cause damage to the machine and cause a fire.
Do not repair the power fuse without professional guidance. Improper use of the fuse will cause damage to the machine and cause a fire.
In order to avoid violating traffic rules, drivers cannot watch videos while driving and operating machines to avoid unnecessary accidents.
For safety and to ensure the normal use of the product, please invite professionals to install, disassemble or repair the machine to avoid damage to the machine and accidents. For more information, please contact your local professional car audio store.
Please avoid putting this product in humid environment and water to avoid fire caused by electric shock or other unnecessary damage.
Note: To prevent short circuit, please remember to turn off the car and disconnect the ACC connected to B+ before installation.
3. Machine Reset
1. The first use of the system before or after the replacement battery, the machine must be reset. 2. When the machine function is not normal, the machine must be reset. 3. Click restore factory settings in system settings interface, make the machine is in the initial state. 4. Use a pointed object, press the RESET button on the panel,or click the system RESET in the system settings, the machine will be RESET to turn it off, back to the factory the initial state.
Note: press the RESET button and the system initialization will lose time and set the value before.
3

[Installation] As shown in the figure above, there are three ways to install the machine, please choose one of them according to the actual situation.Of course, you can also re-install the new radio according to the installation method of the original car radio.
[Wiring] 1. Product Dimension
4

2. Back interface diagram
5

3. Harness
6

4. Installation Steps
7

1>How to find the power cord of the car? First turn the car key to the ACC state. Then regulate the Universal Watch to the 20V gear. Connect
the black stylus to the power ground (the outer ironclad of the cigar lighter) and use the red stylus to test each wire of the car. Normally a car has two wires about 12V(some cars only have one). That is the positive pole line. How to distinguish the ACC and memory line? Pull out the car key after you find the two positive pole lines. The memory line is the electrically charged one after you nu plug the key. (Look the Picture 1) 2>How to find the ground wire of the car (negative pole)?
Turn the Universal Watch to the on/off beep gear. Then connect the black stylus to the power ground (the outer ironclad of the cigar lighter) and use the red stylus to test each wire except the two power lines. The energized one is the ground wire(negative pole). Some cars have two ground wires. (Look the Picture 2) 3>How to find the horn line of the car?
Turn the Universal Watch to the on/off beep gear. Connect the black stylus to any wire except the power cord and ground wire. Then use the red stylus to test each remaining wire. The energized one is the horn wire. Then use the same method to find out the other horn lines. *(Look the Picture 3) 4>How to test whether the unit work properly?
When you get the unit, you’d better test the unit with battery or power supply before installation. Wire connection method: Twist the red wire and yellow wire together and then connect them to the positive pole. Connect the black wire to the negative pole. Then press the switch to turn on the unit and get a horn to connect to the horn wire. (Two wires connected to the horn are of the same color. The white wire is supposed to be connected to the positive pole and the white one with black part connected to the negative pole of the horn. You can make no distinction between the positive and negative poles of the horn.) Then test the function of the unit. 5>How to connect Bluetooth?
Turn on the unit and initiate Bluetooth function of phone, and then search for the user name of the unit. Click the connect button and the phone will show it is connected. If you want to play music with Bluetooth, press the function transition button to switch to Bluetooth mode and then click songs on your phone. You can also dial numbers on your phone to make a phone call with Bluetooth. 6>How to fix the unit ?
Since each car has a different way of fixing the unit and the location of the screws are different, there is no defined way to fix the unit. You may consult the fixing method of the original unit. If it was fixed by tightening screws with the steel angle, you can unload the steel angle of the original unit to both sides of our unit, then use the electrician tape to tight the steel angle (since screw hole size is probably unmatched). If the original unit was fixed with iron frame, you can fix the iron frame of our unit in the car first, and then push the unit to fasten it. If the size is not fit, you can wrap the unit with electrician tape to increase the volume of the unit, and then put it in and fasten it. Or you can think of a better way to fix it, but anyway, you can fix it. 7>How to install the navigation antenna?
First you should tighten the screws of the navigation antenna and the unit. Then you must fix the navigation antenna module in a place that has sunlight or on the windshield. (That’s very important
8

because poor installation will affect navigation signals.) 8>The default factory mode password
Factory mode password: 1617 (Different products, the password may be different) 9>The default Bluetooth Pin Code
Bluetooth Pin Code : 0000/1234
5. Schematic diagram of reversing camera wiring
There is a separately Camera Input, please do not connect to RCA cable. Here’s the complete steps of camera wiring. 1. Camera power cable: red and black. — Red connection to reverse the positive light, black to reverse the negative light. 2. Camera RCA cable: yellow port. —- Insert it on the radio rear input cable. It’s a single cable with yellow port with label “REVERSE/BACK/REAR CAMERA”) 3. Trigger Cable 3.1 near the radio: the red wire A — NO Need to connect 3.2 near the camera: the red wire B — connects to car’s rear light positive. When you pull the rear gear, the device will automatically display the rear view image.
9

Grid lines ON/OFF: This camera without grid lines by default. How to turn on Grid lines: Cut off the little circle on the knot which is close to the Len to get the guide
lines. Turn off Grid lines: Connect this line again to turn off grid lines and screen will show sharpe and vivid
reversing image.
10

Wiring method: Preparation tools: tape, screwdriver, wire cutters, plastic prying tool, traction wire . Step 1: Insert the original accessory camera wire harness into the rear license plate light hole, and
then directly snap it in. Step 2: Step 2: Remove the trunk lining, pull out the waterproof rubber ring, use the tow line to pull
the camera cable out of the suitcase, insert the camera wire harness and data connector into the hole of the baffle, and finally rein stall the waterproof rubber ring.
Step 3: Remove the decorative lining board on the left side of the trunk, plug the data power integrated extension cable with the camera harness, and lead out from the rear trim panel along the original car harness.
Step 4: Peel off the sealing strip on the left side door of the rear seat, route the cable into the rear cockpit, and pull out the data power integrated plug and the remaining extension cords.
Step 5: Recover the trunk, and insert the extension cord into the gap of the plastic panel along the rubber strip on the door side, all the way to the cockpit door.
Step 6: Remove the storage box under the headlights, pass through the top of the OBD interface, and then connect the wiring interface to the navigator interface.
NOTE: Whether you are using a rear view camera or not, please connect the rear view wire.Otherwise, your WiFi and Bluetooth signals will suffer
6. Fixed machine
1.Fix the bracket on the left and right sides of the machine with screws, and adjust the position of the bracket according to the actual installation.
2.Screw the machine in the mounting position of the central console of the car.
7. Suitable models
This car radio is specially used for Opel Vauxhall, the size is: 214 (Top Width)120 (Height)198 (Bottom Width)mm, please refer to the compatibility table for suitable models. Please measure your car dashboard size before hand.
Corsa (2006-2011) Astra (2004-2009) Vivaro (2006-2010) Zafira (2005-2011) Antara (2006-2011) Meriva (2006-2011) Combo (2004-2011) Vectra (2003-2008) Signum (2003-2011) Tigra Twin Top (2004-2011)
11

8. Parameters
Category Motherboard Memory Configuration Storage Configuration
CPU Core Main Frequency Android Version Radio Communication Rear Camera Standard Satellite Positioning Amplifier Sound Decoder Carplay Android Auto Bluetooth Version Colorful Lights USB External Microphone Video Output DVR OBD2 DAB+ Split Screen Navigation

Parameter SHA16 / 23
1G & 2G 16G & 32G
8227L 4
1.3GHz 11.0
FM/RDS WIFI
AHD720 & CVBS GPS 7388
ST7729-HiFi Wireless carplay & Wired carplay Wireless Android auto & Wired Android auto
4.2 White light Dual USB
Support Support Support Support Support Support Offline Maps & Online Maps
12

[Introduction to basic functions] [Main interface] [Icon Introduction]

1. Machine-Host

Symbol
MIC RST

Operations & Controls
Built-in microphone hole Reset (press with a sharp object)
Power on the device Press and hold for 3 seconds to power off the device Short press
repeatedly to mute or unmute To main menu

13

Return to the previous interface Press or hold repeatedly to increase volume Press or hold repeatedly to decrease volume

2.On Screen – Main Interface (Note: The main interface is different for different products, please refer to the specific product)

Icon

Name

Operations

Main menu

Touch to switch screen to main menu

Hide shortcut menu Backstage
Return

Touch to hide the shortcut menu button area
Touch to show all programs running in the background
Touch to switch screens to return to previous screen

WiFi

Turn on/off WiFi

Apps

Touching will take you to the icon desktop of the installed application

Settings

Touch to enter the Android settings interface

Navi Music

Touch to enter the set navigation interface Touch to go to local music

Radio BT

Touch to enter the radio interface Touch to enter the bluetooth interface

Filemanager Video

Touch to enter file management Touch to enter video playback

3.On screen – Drop-down list
14

Icon

Name

Wi-Fi

Bluetooth

Screen off

Car Amplifier

Screenshot

Car setting

Clean-up Video out

Operations Turn on/off Wi-Fi Turn on/off Bluetooth
Open/Close Screen
Turn on/off Car Amplifier
Touch to take a screenshot
Touch to enterCar setting
Touch to clean Touch to set Video out

4.On screen – APP Icon

Icon

Name

HERE WeGo

Operations Touch to enter offline map

PODOFO Voice PODOFO+ Google DAB+ Car Settings Maps ZLINK

Touch to enter Smart Voice to set up
Touch to enter Smart Voice software
Touch to go to Google
Touch to enter DAB+ Touch to enter settings, enter password 8888 for
factory settings Touch to enter google map online
Touch to enter ZLINK, can connect wired & wireless Carplay/Android Auto

Sound Effects

Touch Adjustable Settings Sound Effects

15

[Choose correct Model and Year] 1. Car Settings – Factory Settings (passwords: 1617) – Patameter Settings – Protocal settings – Luzheng – choose your car model 2. Turn off your car and restart 3. You can check the canbus “connect” or “disconnect” through “Car Settings – System info”
16 [Main functions and usage] 17

18

19

Hi-Fi function, high-fidelity sound quality, perfect playback of the original sound field, can perfectly reproduce the sound of music or video, without distortion, bringing you the most authentic sound. Hi-Fi function brings you an immersive experience.
Click to enter Sound Effects, you can adjust and set the sound effects, click HiFi, the font turns red, indicating that the HiFi function is being used; click HiFi again, the font turns gray, indicating that the HiFi function is turned off.
20

21

22

23

24

6.13 Offline Map–HERE WeGo (Note: You can also use Google Maps online) In order to use the offline feature of your device, follow the steps below to set it up. 1. Power on the device and connect the device to the internet via Wifi. 2. Find the APP named HERE WeGo in the main menu.
3. Follow the APP prompts to enter the main map page and find the options menu.
4.Click “Use the app offline” and download your favorite map data in the country list.
25

5.Click “Use the app offline” and download your favorite map data in the country list.

6.14 Supported Additional Devices
(Note: Additional devices are not included in the product and accessories, you need to purchase additionally)

Icon

Name

Connection Way

External Microphone

RCA MIC Interface

DAB+

USB

DVR

USB

OBD Subwoofer Amplifier Video Output

Bluetooth RCA audio output or subwoofer interface
RCA audio output interface USB

U disk

USB

Thank you again for using our product. If you have further questions, please contact our customer service staff. Product UI interface or functions may be modified and upgraded from time to time without notice. It is normal if the manual has some discrepancies

26

27

Carplay Connection Considerations 1. The Carplay function only supports iPhone connection 2. The data cable used for Carplay connection must be the original Apple mobile phone data cable
Android Auto Connection Considerations 1. The Android Auto function can only support the connection of Android phones, and the Huawei version of phones does not support connection 2. Your Android phone needs to support Google services and install Andriod Auto software 3. Before using the Android Auto function, please check whether the Android Auto software in your phone needs to be updated. If you need to update, please update it before using it.
Other matters needing attention 1. Different car players and mobile phones have different connection interfaces. All pictures in this manual are for reference only. Please refer to the actual product pictures. 2. The built-in Carplay APP of different machines are different. Here we take ZLink as an example to introduce. If there is no ZLink App in your machine, please ask our customer service staff.
28

29

30

31

32

33

34

35

36

37

38

39

40