Cub Cadet Parts

Fuel Tank Assembly W/Fuel Lines Incl. 29 – Part Number: 753-06797

Your Price

$20.99

Cub Cadet Fuel Tank Assembly W/Fuel Lines Incl. 29

★★★★★

1 Review

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Shear Pin, .25 – Part Number: 738-04124A

Your Price

$3.99

Cub Cadet Shear Pin, .25

PartSelect Number PS9110822

Manufacturer Part Number 738-04124A

This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.

Grass Catcher Frame – Part Number: 647-04271-0637

Your Price

$37.15

Cub Cadet Grass Catcher Frame

★★★★★

1 Review

PartSelect Number PS9988561

Manufacturer Part Number 647-04271-0637

Rear Axle Assembly – Part Number: 911-04144B

Your Price

$33.18

Cub Cadet Rear Axle Assembly

★★★★★

2 Reviews

PartSelect Number PS10023414

Manufacturer Part Number 911-04144B

Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate. This part replaces part numbers 911-04144 and 911-04144A. Wear work gloves to protect your hands when installing this part.

Speed Selector Cable – Part Number: 946-04396A

Your Price

$19.72

Cub Cadet Speed Selector Cable

PartSelect Number PS9166871

Manufacturer Part Number 946-04396A

This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of the snow blower, allowing you to adjust and select the speed at which the snow blower moves. When you adjust the speed on the control panel, the cable is activated, and it engages with the transmission to control the snowblower. The speed selector cable can fail over time due to various reasons including fraying from use and exposure to harsh conditions, corrosion, or inadequate lubrication, which causes it to become stiff. If the cable is faulty, your equipment will be unable to move, or stuck at one speed, and the control panel may be unresponsive. Disconnect the faulty cable and route the new cable through the same path. Connect the cable to the control panel and transmission, and secure it with the appropriate fasteners.

Chute Flange Keeper – Part Number: 731-04869A

Your Price

$4.99

Cub Cadet Chute Flange Keeper

PartSelect Number PS9104771

Manufacturer Part Number 731-04869A

The chute flange keeper is a genuine OEM replacement part that secures the chute flange on snowblowers. The keeper is made of plastic and fits onto the metal piece, known as the flange, that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper may wear down or fall off and cause the chute flange to fall out of alignment. If you notice that you have difficulties adjusting the direction of the chute and you hear rattling during use, then this is a sign that the flange keeper is no longer properly attached. Before positioning the new keeper, clear off any dirt or debris in the area. Use a pair of pliers to fit the keeper on and align the holes on the flange keeper with the holes on the chute before securing it.

Bolt- Stud - H=42.5mm – Part Number: 90043-ZL8-000

Your Price

$4.99

Cub Cadet Bolt- Stud - H=42.5mm

PartSelect Number PS10021937

Manufacturer Part Number 90043-ZL8-000

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

Cub Cadet Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063

Your Price

$3.99

Cub Cadet Nut, Flange Lock, 5/16-18, Grf

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Chute Flange Keeper – Part Number: 731-0851A

Your Price

$4.99

Cub Cadet Chute Flange Keeper

★★★★★

1 Review

PartSelect Number PS10005747

Manufacturer Part Number 731-0851A

This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.

Top Appliance Brands

Top Lawn Equipment Brands

Top Appliances

Top Lawn Equipment

Popular Cub Cadet Parts

Related Cub Cadet Parts

Popular Cub Cadet Models

Troubleshooting at your fingertips

Cub Cadet Parts

Find Your Part

Popular Cub Cadet Parts

Related Cub Cadet Parts

Popular Cub Cadet Models

Troubleshooting at your fingertips