Answer
Verified
375.3k+ views
Hint: Optical fibre technology is the technology in which electrical signals are converted into optical signals. These signals are transmitted through thin fibres made of glass. The optical signals thus transmitted are again converted into electrical signals at the reception point.
Complete step by step solution:
We can define an optical fibre as a cylindrical waveguide made of a transparent dielectric material (like plastic or glass). The light waves are guided along their length by a phenomenon called total internal reflection.
The basic principle of optical fibre is total internal reflection. If the angle of incidence is greater than a particular angle called critical angle, the ray will not pass through the material, but it will trace its way back to the surface itself. This phenomenon is called total internal reflection. The light enters from one end of the fibre and undergoes continuous total internal reflections from the sidewalls of the fibre. The light will travel through the fibre in a zigzag path.
Practically optical is made in a cylindrical shape. Usually, optical fibre has three coaxial regions as shown in the figure.
The innermost region is called the core. This is the part through which light is guided.
The order of the diameter of the region ranges from $8.5\mu m$ to $62.5\mu m$.
The core is surrounded by a middle region called the cladding. The diameter of cladding is in the order of $125\mu m$. The refractive index of the cladding will be lesser than that of the refractive index of the core.
The light will enter into the core and due to the change in refractive index between the core and the cladding, it will undergo total internal reflection and propagate through the fibre and reach its destination.
The outermost region is called buffer coating or the sheath. This coating of plastic is given to the optic fibre for protection. This coating will provide physical and environment protection for the fibre.
Note:
The optic fibre system is used to transmit signals over a long distance efficiently and with minimum loss in the signal. There is a source of light where the electrical signal is converted into light at the beginning of the fibre and a photodetector that decodes the light signal into electrical signal at the end of the fibre.
Complete step by step solution:
We can define an optical fibre as a cylindrical waveguide made of a transparent dielectric material (like plastic or glass). The light waves are guided along their length by a phenomenon called total internal reflection.
The basic principle of optical fibre is total internal reflection. If the angle of incidence is greater than a particular angle called critical angle, the ray will not pass through the material, but it will trace its way back to the surface itself. This phenomenon is called total internal reflection. The light enters from one end of the fibre and undergoes continuous total internal reflections from the sidewalls of the fibre. The light will travel through the fibre in a zigzag path.
Practically optical is made in a cylindrical shape. Usually, optical fibre has three coaxial regions as shown in the figure.
The innermost region is called the core. This is the part through which light is guided.
The order of the diameter of the region ranges from $8.5\mu m$ to $62.5\mu m$.
The core is surrounded by a middle region called the cladding. The diameter of cladding is in the order of $125\mu m$. The refractive index of the cladding will be lesser than that of the refractive index of the core.
The light will enter into the core and due to the change in refractive index between the core and the cladding, it will undergo total internal reflection and propagate through the fibre and reach its destination.
The outermost region is called buffer coating or the sheath. This coating of plastic is given to the optic fibre for protection. This coating will provide physical and environment protection for the fibre.
Note:
The optic fibre system is used to transmit signals over a long distance efficiently and with minimum loss in the signal. There is a source of light where the electrical signal is converted into light at the beginning of the fibre and a photodetector that decodes the light signal into electrical signal at the end of the fibre.
Recently Updated Pages
Basicity of sulphurous acid and sulphuric acid are
Assertion The resistivity of a semiconductor increases class 13 physics CBSE
Three beakers labelled as A B and C each containing 25 mL of water were taken A small amount of NaOH anhydrous CuSO4 and NaCl were added to the beakers A B and C respectively It was observed that there was an increase in the temperature of the solutions contained in beakers A and B whereas in case of beaker C the temperature of the solution falls Which one of the following statements isarecorrect i In beakers A and B exothermic process has occurred ii In beakers A and B endothermic process has occurred iii In beaker C exothermic process has occurred iv In beaker C endothermic process has occurred
The branch of science which deals with nature and natural class 10 physics CBSE
What is the stopping potential when the metal with class 12 physics JEE_Main
The momentum of a photon is 2 times 10 16gm cmsec Its class 12 physics JEE_Main
Trending doubts
What type of defect is shown by NaCl in a Stoichiometric class 12 chemistry CBSE
Difference Between Plant Cell and Animal Cell
Distinguish between tetrahedral voids and octahedral class 12 chemistry CBSE
Derive an expression for electric potential at point class 12 physics CBSE
Difference between Prokaryotic cell and Eukaryotic class 11 biology CBSE
What is BLO What is the full form of BLO class 8 social science CBSE
Fill the blanks with the suitable prepositions 1 The class 9 english CBSE
Give 10 examples for herbs , shrubs , climbers , creepers
Fill the blanks with proper collective nouns 1 A of class 10 english CBSE