Yankee good idea on a Solent Rig? - Cruisers & Sailing Forums
Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > The Fleet > General Sailing Forum
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 15-05-2024, 10:49   #1
Registered User

Join Date: May 2024
Posts: 1
Yankee good idea on a Solent Rig?

I have followed this forum for a number of years. Now I am kitting out my new Moody 41DS which has a Solent Rig.
A sailmaker advised me to choose a large Yankee instead of a conventional Genua of 140%.
My jib is a self tacking small one. While I know that Yankees work well on conventional Schoner Rigs, I am not sure that I see an advantage on a Solent Rig.
I wonder if there are members of the group who have experience or advice.
ORLASailing is offline   Reply With Quote
Old 15-05-2024, 12:46   #2
Moderator
 
Dockhead's Avatar

Cruisers Forum Supporter

Join Date: Mar 2009
Location: Denmark (Winter), Cruising North Sea and Baltic (Summer)
Boat: Cutter-Rigged Moody 54
Posts: 34,007
Re: Yankee good idea on a Solent Rig?

The Solent rig boats I've sailed (and I have a good few miles on a Discovery 67 with this rig) have light, full genoas on the outer forestay, and a self-tacking blade on the inner one.

On CUTTER rigged boats, like mine, a yankee, not genoa, is used on the forestay.

The advantages are easier to tack across the innner forestay (not applicable to a Solent rig, where in any case you have to furl to tack), and better control of sail shape.

If I had a Solent rig boat, I think I would plan to use the blade most of the time, with a light genoa available for light wind and off the wind. With a pole where necessary. I don't think I would want a yankee for that.

YMMV.

On my boat, I have two alternate sails for the forestay -- 120% yankee and 95% blade. The blade is on the forestay 90% of the time. I also use an A2 with a long carbon pole, and it's actually less trouble (!) to fly the spinnaker than to change out the blade for the yankee.

That's why I say I think I would prefer a light, large sail on the Solent rig. The blade is your all purpose sail; you'll use it 90% of the time. When you want to shift gears, you want a bigger difference in area and shape, then you would get with a yankee.

Just my subjective opinion.
__________________
"You sea! I resign myself to you also . . . . I guess what you mean,
I behold from the beach your crooked inviting fingers,
I believe you refuse to go back without feeling of me;
We must have a turn together . . . . I undress . . . . hurry me out of sight of the land,
Cushion me soft . . . . rock me in billowy drowse,
Dash me with amorous wet . . . . I can repay you."
Walt Whitman
Dockhead is online now   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutter vs Solent Rig usdivers61 Seamanship & Boat Handling 81 07-09-2019 06:20
Swapping outboard motor, good idea/bad idea SV_Harbinger Engines and Propulsion Systems 42 19-11-2018 15:22
Solent Rig Moody46CC General Sailing Forum 12 08-03-2016 08:52
Solent Rig? OldFrog75 General Sailing Forum 30 16-12-2013 07:48
Is the Yankee a Necessity for a Cutter Rig? ecojimbo Deck hardware: Rigging, Sails & Hoisting 2 18-08-2009 05:44

Advertise Here


All times are GMT -7. The time now is 03:59.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.