Reset Wi-Fi Adapter In Windows 10

Are you experiencing internet connectivity issues on your Windows 10 PC? Follow these simple steps to reset your Wi-Fi adapter and get connected again.

Key Takeaways:

• Resetting the Wi-Fi adapter can help resolve connectivity issues on Windows 10.
• There are three methods to reset the Wi-Fi adapter: disabling and enabling the adapter, resetting all network adapters, and using Command Prompt.
• Method 1: Disable and Enable Wi-Fi Adapter through Windows Settings.
• Method 2: Reset All Network Adapters through Windows Settings.
• Method 3: Reset Wi-Fi Adapter Using Command Prompt as an administrator.
• Resetting the Wi-Fi adapter will delete saved network profiles and restore settings to default.
• If the connectivity issue persists, further troubleshooting or contacting your internet provider may be necessary.

Methods to Reset Wi-Fi Adapter in Windows 10

There are three methods you can use to reset your Wi-Fi adapter in Windows 10, depending on your preference and the severity of the connectivity issues you’re facing. Resetting the Wi-Fi adapter can often resolve common problems such as slow or unstable internet connections. Here are the methods:

Method 1: Disable and Enable Wi-Fi Adapter

1. Open the Windows Settings by clicking on the Start menu and selecting the gear icon. Then, click on “Network & Internet” and choose “Change adapter options”.

2. In the Network Connections window, find your Wi-Fi adapter, right-click on it, and select “Disable”. Wait for a few seconds.

3. Right-click on the Wi-Fi adapter again and select “Enable”. The adapter will attempt to reconnect to the default Wi-Fi network.

Method 2: Reset All Network Adapters

1. Open the Windows Settings by following the steps mentioned in Method 1. Click on “Network & Internet” and select “Network reset”.

2. In the Network reset window, click on the “Reset now” button and confirm the action. This will reset all network adapters on your computer.

3. Restart your computer to complete the reset process. Once your computer restarts, the Wi-Fi adapter will be reset to its default settings.

Method 3: Reset Wi-Fi Adapter Using Command Prompt

1. Open Command Prompt as an administrator by right-clicking on the Start menu, selecting “Command Prompt (Admin)”.

2. In the Command Prompt window, type the command “netsh interface show interface” and press Enter. This will display the name of your Wi-Fi adapter.

3. To disable the Wi-Fi adapter, use the command “netsh interface set interface name=’networkadaptername’ admin=disabled”, replacing ‘networkadaptername’ with the actual name of your adapter.

4. To enable the Wi-Fi adapter again, use the command “netsh interface set interface name=’networkadaptername’ admin=enabled”.

5. The Wi-Fi adapter will restart and attempt to connect to the wireless network.

It’s important to note that resetting the Wi-Fi adapter will delete any saved network profiles and restore the settings to their default values. If the connectivity issues persist after resetting, further troubleshooting or contacting your internet provider may be necessary.

Conclusion

Resetting the Wi-Fi adapter in Windows 10 can be a helpful step in troubleshooting and resolving connectivity issues, but it’s important to note that it will delete saved network profiles and restore settings to default. If you’re still experiencing problems after resetting the adapter, consider further troubleshooting or contacting your internet provider for assistance.

Method 1: Disable and Enable Wi-Fi Adapter

1. Open the Windows Settings, click on Network & Internet, and select Change adapter options.

2. Right-click on the Wi-Fi adapter and choose Disable. Wait for a few seconds.

3. Right-click on the Wi-Fi adapter again and choose Enable. The adapter will attempt to reconnect to the default Wi-Fi network.

Method 2: Reset All Network Adapters

1. Open the Windows Settings, click on Network & Internet, and select Network reset.

2. Click on the Reset now button and confirm the action.

3. Restart your computer to complete the reset process.

Method 3: Reset Wi-Fi Adapter Using Command Prompt

1. Open Command Prompt as an administrator.

2. Use the command “netsh interface show interface” to find the name of the Wi-Fi adapter.

3. Disable the Wi-Fi adapter using the command “netsh interface set interface name=’networkadaptername’ admin=disabled” (replace ‘networkadaptername’ with the actual name of the adapter).

4. Enable the Wi-Fi adapter using the command “netsh interface set interface name=’networkadaptername’ admin=enabled”.

5. The Wi-Fi adapter will restart and attempt to connect to the wireless network.

It’s important to note that resetting the Wi-Fi adapter will delete saved network profiles and restore settings to default. If the issue persists after resetting, further troubleshooting or contacting your internet provider may be necessary.