MACARD CRYO-360 WiFi Extender Signal Booster User Guide

MACARD CRYO-360 WiFi Extender Signal Booster

Phone setup

View full video setup tutorial at: themacard.com/guide

SETTING UP

• Step 1:
  

  • Plug the Extender into a power outlet near your existing Wi-Fi Router.
  • Turn ON the Extender with an upward flick of the “ON/OFF” switch. The switch is on the left side of the device.

• Step 2: Activate the Extender by pressing the “RESET” button for 15 seconds. The Extender will reboot within 30 seconds.

• Step 3: Open your mobile settings and turn on airplane mode.

• Step 4

  • Go to your Phone settings.
  • Open Wi-Fi, and turn it ON.
  • Search for the network name “Wi-Fi Extender” and click on it to connect

• Step 5: Open a web browser and input or scan QR Code:

• Step 6: Click “LOGIN” and wait 10 seconds. The system scans all networks.

• Step 7: Click on the name of the existing Wi-Fi Network you want to extend, e.g., Home Wi-Fi.

• Step 8: Type your Wi-Fi password into the Password box. Click the “Save Setting” button.

  • Once you complete the steps, your Extender reboots automatically.
  • Place the Extender halfway between your Wi-Fi Router and the area with poor signal coverage
  • The Extender’s default name is your [Wi-Fi name – Plus], e.g., HOME Wi-Fi – Plus.
  • The password remains the same as the existing Wi-Fi Router’s password.

FAQ

1. How do I reset the Extender?
   Press the “RESET” button for 15 seconds. The Extender will reboot within 30 seconds. You can setup the Extender again.

2. How far should the Extender be from the router?
   The Extender should be halfway between the Wi-Fi Router and the area with poor signal coverage. The Extender must receive a good signal from the Wi-Fi Router.

3. Should I connect the ethernet cable from the Wi-Fi Router to the Extender?
   No, you should only connect the network cable from the Extender to a computer.

4. Does the Extender increase my internet speed?
   No, it increases the range of your Wi-Fi Network.

5. Does the Extender work with 5GHz?
   No, the Extender only operates in the 2.4GHz band.

Need help?
We’re here for you!

• Online support
  Available 24/7

• [email protected]
  Available 24/7

• +1 (888) 407 1142 (US)
  Toll-Free | Mon-Fri 9:00 am – 5:00 pm (CST)

• themacard.com/help

PC Setup

View full video setup tutorial at: themacard.com/guide

SETTING UP

• Step 1:
  

  • Plug the Extender into a power outlet near your existing Wi-Fi Router.
  • Turn ON the Extender with an upward flick of the “ON/OFF” switch. The switch is on the left side of the device.

• Step 2: Activate the Extender by pressing the “RESET” button for 15 seconds. The Extender will reboot within 30 seconds.

• Step 3
  

  • If you have a PC with Wi-Fi settings:

  • Go to your PC Wi-Fi settings.

  • Open Wi-Fi, and turn it ON.

  • Search for the network name “Wi-Fi Extender” and click on it to connect.
    OR
    

  • If you have a PC without Wi-Fi settings:

  • Use the included Wi-Fi network cable to connect your Extender to the computer.

• Step 4****

• Step 5: Click “LOGIN” and wait 10 seconds. The system scans all networks.
  NOTE:
  If after login, the Extender opens a page with all settings, please click the “REPEATER” mode, and the Extender will start scanning networks.

• Step 6: Click on the name of the Wi-Fi network you want to extend, e.g., Home Wi-Fi.

• Step 7: Type your Wi-Fi password into the Password box. Click the “Save Setting” button.
  • Once you complete the steps, your Extender reboots automatically.
  • Place the Extender halfway between your Wi-Fi Router and the area with poor signal coverage.
  • The Extender’s default name is your [Wi-Fi name – Plus], e.g., HOME Wi-Fi – Plus.
  • The password remains the same as the existing Wi-Fi Router’s password.

Need help?
We’re here for you!

• Online support
  Available 24/7

• [email protected]
  Available 24/7

• +1 (888) 407 1142 (US)
  Toll-Free | Mon-Fri 9:00 am – 5:00 pm (CST)

• themacard.com/help

WARNING

1. Unplug the device in the event of a thunderstorm to prevent damage.
2. Keep the device away from any heat source and make sure the device is well ventilated.

Safety Information:

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

FCC warning:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
  the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

• Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the emitter and your body

References

• Get Started instruction WiFi Extender 5G | MACARD

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>