How can I reset and restore the range extender to factory default settings?
Two methods can reset the device to factory default. The first method is HW method :
- Press the reset button on the rear panel until the two Link Rate LED and Device to Extender blinks. This takes about 5~10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
- Release the button.
- Wait for the extender to reboot.
- Log in with the default password. The default username is ("admin") and password ("password").
- Another method is the software method. Open the Add WPS Client and select Maintenance then select Backup Setting page. Click 'Erase' button. EX6200 will pop up message to ask you confirm this command. Click 'Yes' to proceed or click 'No' to cancel this.
Why do I need to always have the latest firmware on my NETGEAR product?
Having the latest firmware will help increase the stability, functionality and performance of your product. The new and most up-to-date firmware will likely correct issues as well as potentially add new and improved features to the product.
How can I put EX6200 to get the best performance?
We suggest you check the Link Rate LED is orange or green to gain best performance. If you still see dead spot, move EX6200 closer to the dead spot. Or you can rotate the two antenna to different directions to see if dead spot can be cleared.
What can I do if I forgot or lost the Password for the wireless network of this extender?
By default setting, EX6200 use the same password as your home network. You need log into the router to get the password. If you change EX6200's password during Smart Setup, EX6200 don't have interface to let you view the password. Thus we suggest you redo the EX6200 Smart Setup to configure EX6200 again.
What is WPS (Wi-Fi Protected Setup)?
Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless network. Traditionally, users would have to manually create a wireless network name (SSID), and then manually entering a creative, yet predictable security key on both the router and client to prevent unwanted access to their wireless network. With WPS, it will automatically configure a wireless network with a network name (SSID) and strong WPA data encryption and authentication. WPS can be enabled using 2 options:
- PIN (Personal Identification Number) Method, in which a PIN has to be taken either from a sticker label or from the web interface of the WPS device. This PIN will then be entered in the AP or client WPS device to connect.
- PBC (Push button configuration) Method, in which the user simply has to push a button, either an actual or a virtual one, on both WPS devices to connect.
How come there is no install CD?
The EX6200 does not come with an install CD. It has a new feature called genie that will help configure the extender. You can use wireless device to connect to the default SSID 'NETGEAR_EXT' without security first. Then open EX6200 Web GUI. You can refer to the IG Card or booklet that comes with gift box for more details.
How do I get the latest firmware?
During installation via the Web genie, EX6200 looks on the web for the latest firmware and automatically installs it. In addition, the FW on the GUI also support auto firmware upgrade. The extender will check for the latest firmware on web site every time when you login the GUI.
What can I do with ReadySHARE USB Storage Access?
In your home today, you connect multiple PCs and other devices to the network. Many of the same files now need to be routinely accessed by multiple PCs, gaming consoles and other devices connected to the network. Most consumers buy external hard drives to store the content besides the desktop hard drives. But now you can simply plug in your USB external hard drive to the USB port of the router instead of connecting to each and every computer when required. Any device in the network can now read/write simultaneously from the USB hard drive connected to the EX6200 at a much higher speed than any competing router in its category.
How can I change the channel of EX6200?
The Channel of EX6200 is the same as the home network in internet surfing mode. You need to change home network's channel in order to change EX6200's channel.
Does the EX6200 have compatibility issues with routers?
It is a universal extender, so all routers should be compatible.
Can I use a EX6200 to connect WiFi devices 200 feet away from my existing router?
The distance (200 feet) from the existing router is too far, thinking that there is also interference. Using a wireless powerline adapter is another option.
My NETGEAR WiFi extender won't connect to my BT Home Hub using WPS, am I doing something wrong?
The "Wireless Association" technology being used by BT Home Hub 2 is different from the WPS of the NETGEAR extender. BT Home Hub 2's "Wireless Association" button is not for WiFi WPS, but for the association with a DECT phone. If you are using a BT Home Hub 3, it does have a "Wireless WPS" button. However, WPS was disabled by default on BT Home Hub 3. For more information, please visit this link https://community.bt.com/t5/Other-Broadband-Queries/BT-Home-Hub-3-WPS-Not-available/td-p/544533.
Last Updated:07/16/2022
|
Article ID: 24488