Xiaomi Redmi Note 13 Smartphone User Manual
- May 15, 2024
- Xiaomi
Table of Contents
Xiaomi Redmi Note 13 Smartphone
Specifications
- Model: Redmi Note 13
- Volume Buttons : Yes
- USB Type-C Port: Yes
- Micro SD / Nano-SIM: Yes
- Nano-SIM: Yes
Product Usage Instructions
Volume Buttons
The product is equipped with volume buttons that allow you to adjust the
audio output. Press the “+” button to increase the volume and the “-” button
to decrease it.
USB Type-C Port
The USB Type-C port is used for charging the device and transferring data.
Use the provided USB Type-C cable to connect the device to a power source or
another compatible device.
Micro SD / Nano-SIM
The product supports both Micro SD cards and Nano-SIM cards. To insert a
Micro SD card or a Nano-SIM card, locate the designated slot on the device and
carefully insert the card following the provided instructions.
Nano-SIM
The product accepts Nano-SIM cards. Make sure to obtain a compatible Nano-
SIM card from your service provider. Insert the Nano-SIM card into the
designated slot on the device, following the provided instructions.
Thank you for choosing Redmi Note 13
Long press the power button to turn off the device.
Follow the on-screen instructions to configure the device.
More information is available on each official website:
www.mi.com/global/service/userguide
About SIM cards:
Do not insert non-standard SIM cards into the SIM card slot. They can damage
the SIM slot.
WARNING : Do not disassemble the device.
WEEE: Special precautions must be taken to dispose of the product safely.
In the EU, this label indicates that the product should not thrown away
together with other household waste.
Recycle responsibly to prevent damage to the environment or human health due
to inappropriate disposal of waste and to promote a pourable reuse of material
resources.
You can recover the device safely by using the return and collection system
that exists, or contact the retailer where the product was purchased.
BE CAREFUL
- RISK OF EXPLOSION IF THE BATTERY IS REPLACED WITH THE WRONG TYPE.
- DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Avoid hearing damage by not listening to high sound levels for longer periods.
Additional safety information and precautions can be found below link:
www.mi.com/en/certification
Important safety information
Please read all the safety information below before using the device:
-
Use of non-approved cables, power adapters, or batteries may cause fire explosion or electric shock, pose other risks, or damage the device.
-
The device’s operating temperature range is 0 °C to 40 °C. If you install the device in an environment outside the temperature range, the device may be damaged.
-
If the device has a built-in battery, do not attempt to replace the battery yourself. They may damage the battery or device.
-
Only charge the device with the supplied or approved cable and power adapter.
Use only approved accessories that are compatible with the device. -
When charging is complete, disconnect the adapter from both the device and the power outlet.
Do not charge the device for more than 12 hours. -
The battery must be recycled or disposed of separately from household waste. Inaccurate handling of the battery may cause fire or explosion. Discard or recycle the device, its battery, and accessories according to local regulations.
Do not disassemble, strike, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.- Do not short-circuit the battery as this may cause overheating, burns, or other injuries.
- Do not place the battery in a high-temperature environment.
- Overheating may cause an explosion.
- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
- Do not burn the battery as it may cause fire or explosion.
-
The user must not remove or change the battery. Dismantling or repair of the battery may only be carried out by an authorized repair center of the manufacturer.
-
Keep the device dry.
-
Do not attempt to repair the device yourself. If any part of the device does not work as it should, you contact Mi customer service or take the device to an authorized repair center.
-
Connect other devices according to their user manuals. Do not connect incompatible devices to this device.
-
For AC/DC adapters, the outlet must be close to the trust and be easy to get to, e.g. Security measures
Security measures
- Comply with all applicable laws and regulations restricting the use of mobile phones in particular situations and environments.
- Do not use the phone at petrol stations or in explosive environments or environments with explosion risk, including fuel filling points, below decks on boats, facilities for the transfer or storage of fuel or chemicals, or unmeasured where the air may contain chemicals or particles such as grains of sand, dust or metal powder. Follow all signs to turn off wireless devices such as telephones or other radio equipment. Turn off the mobile phone or wireless device when you are in blast areas or in chaos where it is required that “two-way radios” or “electronic devices” are turned off to prevent potential risks.
- Do not use the phone in hospital operating rooms, emergency departments, or intensive care units. Always follow all hospital rules and regulations and care centers. If you have a medical unit, you should list the doctor and the unit’s manufacturer to determine if the phone may interfere with the operation of the device. To avoid potential disturbances in the pacemaker, you must always maintain a distance of at least 15 cm between the mobile phone and the pacemaker. You can do that by inhaling the phone on the row that is on the opposite side of the pacemaker and not carrying the phone in your breast pocket. Avoid disruptions in medical trust by do not using the phone near hearing aids, cochlear implants, or other similar devices.
- Follow all safety regulations for airplanes and, if necessary, turn off the phone on board airplanes.
- When driving a vehicle, use the phone according to applicable traffic laws and traffic rules.
- Avoid being struck by lightning by not using the phone outdoors when weather.
- Do not use the phone to make calls while it is charging.
- Do not use the phone in places with high humidity, e.g. in the bathroom. If you do it can lead to electric shocks and personal injury. fire and damage to the charger..
Security notice
Update your phone’s operating system using the built-in feature for software
updates or visit any of the authorized service points. If you update software
in other ways, the device may be damaged or lead to data loss, security
issues, and other risks.
EU regulations
- The RED Declaration of Conformity
- Xiaomi Communications Co., Ltd. hereby declares that this digital GSM/GPRS/
- EDGE/UMTS/LTE mobile phone with Bluetooth and Wi-Fi 23124RA7EO meets the basic requirements and other relevant provisions of the RE Directive 2014/53/
- EU. The full text of the EU Declaration of Conformity can be found below
- Internet address: www.mi.com/en/certification
RF Exposure Information (SAR)
This device meets SAR (specific energy absorption rate) limits for
public/uncontrolled exposure (localized SAR of 10 grams for head and tail,
limit: 2.0 W/kg) according to the line’s recommendation 1999/519/EC, the
ICNIRP guidelines and
RED (Directive 2014/53/EU).
During SAR testing, this unit was set to transmit at its highest certified
power level on all tested frequency bands and was placed in positions that
simulate
RF exposure during exposure to the head without separation and close to the
body with a distance of 5 mm.
Close-to-body SAR compliance is based on a distance of 5 etc. between the
device and the human body. This device should be worn at least 5mm from the
body to ensure that the RF exposure level is compliant or lower than the
reported level. When attaching the device close to the body, use a belt clip
or a holster that does not contain metal parts and that makes it possible to
maintain a distance of at least 5 mm between the device and the body.
Conformity with RF exposure has not been tested or certified with any
accessory that contains metal worn on the body, and the use of such an
accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g, limit: 2.0 W/kg,
SAR value: Head: 0.770 W/kg, Body: 0.978 W/kg (5 mm distance).
Legal information
- This device may be used in all EU member states.
- Follow national and local regulations where the device is used. This device is intended for indoor use only when used in the frequency ranges 5250-5350 MHz in AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU,
- MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and others functions according to the specification of the IEEE standard 802.11) may vary depending on availability in the region and support of local networks. The feature can be added via OTA if appropriate.
Limitations for the 2.4 GHz band
Norway: This subsection does not apply to the geographical unmeasured
within a radius of 20 km from the center of Ny-Alesund.
Ensure that the main adapters used meet the applicable national regulations as
well as international and regional safety standards.
Frequency band and power
This mobile phone has the following frequency bands only in EU areas and
maximum frequency effect:
- GSM 900: 35.5 dBm
- GSM 1800: 32.5 dBm
- WCDMA Band 1/8 : 25.7 dBm
- LTE Bands 1/3/7/8/20/28/38/40/41: 25.7 dBm
- Bluetooth: 20dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250 MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725
- MHz: 20 dBm, 5725 to 5850 MHz : 14 dBm
- NFC : 13.56 MHz < 42 dBuA/m at 10 m
FCC
FCC Regulations
This mobile phone complies with Part 15 of the FCC Rules. The ignition is
subject to the following two conditions:
- The device may not cause harmful interference, and
- The device must accept all interference received, including interference that may cause unwanted operations.
This mobile phone has been tested and found to meet the limits of a digital
Class B device, under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference installation in the home. This trust generates, breathes, and can
radiate radio frequency energy and, if not installed and used under the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If the equipment causes harmful interference to radio or
television reception, which may be determined by turning the trust off and on,
the user is prompted to try to correct the disturbances by taking one or more
of the following measures:
- Reorient or move the receiving antenna.
- Increase the distance between the trust and the recipient.
- Connect the trust to an outlet on a different circuit to that of the receiver connected to.
- Contact the reseller or an experienced radio/TV technician if you need help.
RF Exposure Information (SAR)
This device meets the authorities’ requirements for exposure to radio waves.
The device is designed and manufactured not to exceed exposure limits for
radio frequency (RF) energy. The exposure standard for wireless devices
breathes a unit of measurement called specific absorption frequency or SAR.
The SAR limit specified by the FCC is 1.6 W/kg. Because it has body-worn appeal this device has been tested and meets FCC RF exposure guidelines for ignition with an accessory that does not contain metal and places the device at least 1.0 cm away from the body. RF exposure compliance for all body-worn accessories containing metal has not been tested and certified, and the use of such body-worn accessories should be avoided. For all accessories used with this unit for body-worn application, the device must be held at least 1.0 cm from the body.
FCC notice
Changes or modifications not expressly approved by the responsible party’s
failure to comply could void the user’s authority to operate the equipment.
Shielded cables must be used with this device to ensure FCC the limits for
Class B are met.
E-label
This device has an electronic label for certification information. If you want
to access it, go to Settings > About phone > Certification, open Settings, and
type “Certification” in the search field.
Model: 23124RA7EO 2312 indicates that this product will be launched after
December 2023.
Model : MDY-14-EL/MDY-16-EP
More information about the adapter can be found on each official website:
www.mi.com/global/service/userguide
Disclaimer
This quick start guide is published by Xiaomi or its local affiliates.
Improvements and changes to this guide that are necessary due to typographical
errors, inaccuracies in the current information or improvements to the program
or trust can be made by Xiaomi at any time and without a precedent message.
However, such changes will be incorporated in new online versions of the quick
start guide (see details at www.mi.com/global/service/userguide). All
illustrations are for illustrative purposes only and may not reflect the
actual device correctly.
FAQ
- Q: What type of SIM card does the Redmi Note 13 support?
- A: The Redmi Note 13 supports Nano-SIM cards.
- Q: Can I use a Micro SD card and a Nano-SIM card simultaneously?
- A: Yes, the product allows you to use both a Micro SD card and a Nano-SIM card at the same time. Please refer to the user manual for instructions on how to insert both cards correctly.
- Q: How do I adjust the volume on the Redmi Note 13?
- A: To adjust the volume, use the volume buttons located on the device. Press the “+” button to increase the volume and the “-” button to decrease it.
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer’s mailing address: No. 019, Ward 9, Building 6, 33 Xierqi
Middle Road, Haidian, Beijing, China, 100085
Brand : Redmi Model: 23124RA7EO
© Xiaomi Inc. All rights reserved.
References
- The domain name locale.la is for sale
- Support - User Guide | Xiaomi Global
- Xiaomi Global | Xiaomi Official Website
- Support - User Guide | Xiaomi Global