Apply to Amity University, Noida B.Tech Admissions 2024
BITSAT 2024 Marks vs Rank vs Branch- Analysing the relationship between BITSAT marks vs rank vs branch can provide students with valuable insights into their potential rank in the entrance test. While focusing on BITSAT cutoffs is crucial, understanding one's rank based on marks obtained can aid in decision-making during counselling. In BITSAT, marks directly correlate with rank, where higher marks typically result in lower ranks.
Announcement: Register for India's Biggest Education Expo
Latest: BITSAT 2024: Session 1 admit card | Session 2 application form
Don't Miss: BITSAT 2024: complete guide | Preparation tips | BITSAT Test Series
However, the exact relationship can fluctuate yearly based on overall candidate performance. For instance, scoring around 370-390 marks may secure a top rank, while 300-320 marks could place one in the 1000-2000 rank range. For example, the BITSAT 2020 cut-off for Computer science was 372 out of 390. These estimations serve as guides, with actual ranks subject to variation each year.
Apply to Amity University, Noida B.Tech Admissions 2024
The table below details the BITSAT Marks Vs Rank 2024 based on previous year’s trends:
Marks | Ranks |
Greater than 380 | 1 to 304 |
351 to 380 | 305 to 2319 |
301 to 350 | 2320 to 8789 |
251 to 300 | 8790 to 22441 |
201 to 250 | 22442 to 32565 |
Less than 250 | Above 32565 |
To gain admission to BITS campuses, candidates need to achieve minimum qualifying marks in the BITSAT entrance test, which are determined by the authorities post-examination. For instance, in BITSAT 2020, candidates were required to score a minimum of 240 marks to qualify.
Level of the questions asked in the paper
Total number of students registered for the test
Average marks obtained by the candidates
The official authorities will release the minimum qualifying marks for BITSAT as cutoff marks. It is imperative for candidates to achieve these minimum cutoff marks to secure admission. The authorities will consider the bitsat total marks and cutoff to determine the performance of candidates in the BITSAT 2024 exam.
A good score in BITSAT varies depending on the branch of the institute. For top branches, students should target scores between 370-380. Generally, an average score for BITSAT 2024 is above 300. For admission into other branches, a score of 290+ is considered sufficient.
Students can gain a better understanding by analysing the cutoff trends from previous years' BITSAT exams. The table below displays the BITSAT cutoffs for the past few years.
Streams | Cutoff 2017 | Cutoff 2018 | Cutoff 2019 | Cutoff 2020 |
Mechanical Engineering | 297 | 269 | 275 | 298 |
Chemical Engineering | 272 | 281 | 252 | 270 |
Computer Science Engineering | 339 | 313 | 342 | 372 |
Electronics and Communication Engineering | 320 | 341 | 318 | 320 |
Electrical and Electronics Engineering | 310 | 255 | 308 | 333 |
Electronics and Instrumentation Engineering | 298 | 269 | 294 | 323 |
Civil Engineering | 273 | 265 | 254 | 254 |
Manufacturing Engineering | 269 | 315 | 308 | 253 |
The authority will announce the BITSAT 2024 cutoff on the official website. Aspirants can refer to the table for the previous year's BITSAT 2023 cutoff.
BITSAT 2023 Cutoff for Pilani, Goa and Hyderabad Campus
Campus | Program | Cut-off Score | BITSAT maximum marks |
Pilani | B.E. Chemical | 224 | 390 |
Pilani | B.E. Civil | 213 | 390 |
Pilani | B.E. Electrical & Electronics | 272 | 390 |
Pilani | B.E. Mechanical | 244 | 390 |
Pilani | B.E. Computer Science | 331 | 390 |
Pilani | B.E. Electronics & Instrumentation | 266 | 390 |
Pilani | B.E. Electronics & Communication | 296 | 390 |
Pilani | B.E. Manufacturing | 220 | 390 |
Pilani | B. Pharm | 153 | 390 |
Pilani | M.Sc. Biological Sciences | 212 | 390 |
Pilani | M.Sc. Chemistry | 213 | 390 |
Pilani | M.Sc. Economics | 257 | 390 |
Pilani | M.Sc. Mathematics | 236 | 390 |
Pilani | M.Sc. Physics | 235 | 390 |
Goa | B.E. Chemical | 209 | 390 |
Goa | B.E. Electrical & Electronics | 252 | 390 |
Goa | B.E. Mechanical | 223 | 390 |
Goa | B.E. Computer Science | 295 | 390 |
Goa | B.E. Electronics & Instrumentation | 244 | 390 |
Goa | B.E. Electronics & Communication | 267 | 390 |
Goa | M.Sc. Biological Sciences | 204 | 390 |
Goa | M.Sc. Chemistry | 205 | 390 |
Goa | M.Sc. Economics | 239 | 390 |
Goa | M.Sc. Mathematics | 221 | 390 |
Goa | M.Sc. Physics | 222 | 390 |
Hyderabad | B.E. Chemical | 207 | 390 |
Hyderabad | B.E. Civil | 204 | 390 |
Hyderabad | B.E. Electrical & Electronics | 251 | 390 |
Hyderabad | B.E. Mechanical | 218 | 390 |
Hyderabad | B.E. Computer Science | 284 | 390 |
Hyderabad | B.E. Electronics & Instrumentation | 244 | 390 |
Hyderabad | B.E. Electronics & Communication | 265 | 390 |
Hyderabad | B. Pharm | 135 | 390 |
Hyderabad | M.Sc. Biological Sciences | 204 | 390 |
Hyderabad | M.Sc. Chemistry | 205 | 390 |
Hyderabad | M.Sc. Economics | 236 | 390 |
Hyderabad | M.Sc. Mathematics | 219 | 390 |
Hyderabad | M.Sc. Physics | 219 | 390 |
Name of the course | BITS Pilani Cutoff | BITS Hyderabad Cutoff | BITS Goa Cutoff |
BITSAT CSE cutoff | 320 | 279 | 286 |
BE Electronics and Communication | 279 | 252 | 256 |
BE Electronics and Electrical | 258 | 230 | 237 |
BE Electronics and Instrumentation | 249 | 222 | 224 |
BE Chemical | 191 | 162 | 167 |
BE Civil | 167 | 158 | 158 |
BE Mechanical | 223 | 182 | 191 |
BE Manufacturing | 184 | - | - |
MSc Physics | 214 | 173 | 188 |
MSc Chemistry | 168 | 160 | 163 |
MSc Biological Sciences | 171 | 158 | 164 |
MSc Economics | 247 | 220 | 230 |
MSc Mathematics | 214 | 177 | 187 |
The average BITSAT total marks and cut off required by candidates to secure a seat in one of the programs offered by BITS are outlined below:
Qualifying Score for BITSAT 2024
Stream | BITS Pilani(Average score) | BITS Hyderabad(Average score) | BITS Goa(Average score) |
Bachelor of Engineering (BE) | 270-338 | 260 to 390 | 257 to 306 |
B. Pharm | 213 – 220 | 177 to 185 | - |
Masters of Science (M.Sc) | 259 – 315 | 252 to 282 | 254 to 283 |
The cutoff range for various courses at BITS Pilani, BITS Hyderabad, and BITS Goa:
Course | BITS Pilani | BITS Hyderabad | BITS Goa |
B.Pharm | 209-213 | 166-170 | - |
B.E. Mechanical | 309-312 | 266-270 | 276-282 |
B.E. Computer Science | 381-387 | 339-348 | 348-352 |
B.E. Manufacturing | 259-264 | - | - |
B.E. Electronics and Communication | 350-355 | 315-320 | 324-331 |
B.E. Electronics and Instrumentation | 329-352 | 286-302 | 295-300 |
The anticipated Marks vs Rank distribution indicates that for scores above 351 marks, the expected rank ranges from 1 to 304. For scores ranging from 350 to 390 marks, the corresponding ranks fall between 305 and 2319, etc.
The marks obtained in BITSAT 2024 play a pivotal role in determining the allocation of BITS campuses to the candidates.
Scoring above 350+ marks out of the total of 390 marks in the BITSAT exam will help secure a good rank. Candidates can also check their bitsat marks vs rank out of 390 to determine their performance in the BITSAT 2024 exam.
While a score of 300 is above the average in BITSAT, to secure admission to the most sought-after branches at the Institute, a student should aim for a score not lower than 370-380, which is regarded as competitive.
Scoring more than 350+ marks out of the total 390 marks in the BITSAT exam will help secure a good rank.
Hello!
The minimum marks required in class 12 examination for BITSAT is aggregate 75% marks in Physics, Chemistry, and Mathematics subjects (if the student has taken Mathematics in BITSAT) or the same in Physics, Chemistry, and Biology subjects (if the student has taken Biology in BITSAT). In addition, the student must also score at least 60% marks in each of the Physics, Chemistry, and Mathematics/ Biology subjects.
Since, you have scored only 57 marks in Mathematics, you are not eligible for this exam.
Please visit the website by clicking on the link given below for more information:
https://engineering.careers360.com/articles/bitsat-eligibility-criteria
Hope this information will help you. Best wishes ahead!
Yes, you can write the NIOS exam a year after passing 12th standard. There is no restriction on appearing for NIOS based on the gap since your previous 12th board exams. NIOS qualification is perfectly acceptable for JEE Mains. You just need to meet the eligibility criteria, which includes passing 10+2 with Physics, Chemistry, and Mathematics. JEE Mains considers the year of your first attempt at 12th board exams (NIOS or any other board) to determine eligibility. You can only appear for JEE Mains for three consecutive years after that first attempt year.
Similar to JEE Mains, BITSAT also accepts NIOS qualifications. BITSAT eligibility is based on the year you passed or appeared for your 12th board exams (current year and previous year). So, you can appear for BITSAT the year you take the NIOS exam and the following year as well.
https://www.careers360.com/exams/bitsat
I hope it helps!
Hello student,
I would suggest that you start upgrading your preparation for JEE Main second session. BITSAT questions are easier than JEE Main and require recollection of the appropriate formulae. The questions asked in JEE Main are more conceptual and require deep knowledge of concepts and techniques. So, a student preparing for JEE Main can easily appear for the BITSAT exam as well. The major difference in the syllabus of the two exams is the presence of English Proficiency and Logical Reasoning in the BITSAT.
What you can do is, alongwith JEE Preparation, you can also start preparing for Eng. and logical reasoning. That ways, you’d be easily able to cover both the exams.
While JEE Main is for admission in government engineering colleges, central and also for several states. BITSAT is only for the various campuses of one of the private colleges in India. So JEE definitely opens up more options.
If you want to check your rank range based on your percentile, then you can refer to the Careers360 JEE Main Rank Predictor: https://engineering.careers360.com/jee-main-rank-predictor?
If you need more information regarding which colleges you would be eligible for based on your marks and details, then you can refer to the Careers360 JEE Main College Predictor: https://engineering.careers360.com/jee-main-college-predictor?
Dear aspirant !!
Hope you are doing well !
The applicant has passed the 12th examination of 10+2 system from a recognized Central or State board or its equivalent with Physics, Chemistry and Mathematics (PCM) and adequate proficiency in English; Also, the applicant has obtained a minimum of aggregate 75% marks in PCM in 12th examination, with at least 60% .
For more information about bitsat ,visit the link .
Hope it helps you !
Thanking you
Hello aspirant,
Qualifications for BITSAT:
So if you will not get 75% you will not be eligible.
Thank you
Hope this information helps you.
The flight attendant job description includes ensuring passenger safety during flights by adhering to safety regulations. Individual pursuing career as flight attendant is also tasked with serving meals and drinks to passengers, but this is mostly a secondary responsibility. A flight attendant is employed by airlines and most of them work on commercial flights, although there is also a market for a private flight attendant (e.g. private charter planes or jets).
Depending on the size of the plane, international safety regulations demand a certain number of Flight Attendants to be on board the aircraft. The standard rule is that there should be one Flight Attendant for every 50 passengers.
Aerospace engineering jobs deal with employees who design or build missiles and aircraft for national defense, or spacecraft. Aeronautical and astronautical engineering are two major branches of aerospace engineering. Aerospace engineering or aircraft engineering is often referred to as rocket science. The bottom line is that the person who is pursuing a career in aerospace engineering has to deal with multiple teams at different levels and work across various technologies.
A career in the aviation industry always sounds exciting. But, there is no scope for the slightest error as it may cost the lives of many people. A Flight Engineer role comes with the responsibility of monitoring the aircraft engine and control systems while in flight. Whenever the aircraft is away from the home station, he or she is required to perform pre-flight and post-flight inspections
An aircrew officer or airline commanders fly aircraft to provide transportation to passengers or cargo. The aircrew officer operates the engines of aircraft and controls to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what the aircrew officer should possess.
This could be possible through membership with professional pilot associations. The aircrew officer is also one of the highest-paid professionals and the job is quite coveted. Keep reading to find out what you need to know about how to become aircrew officer.
You may also read career as Airline Pilot.
An Aeronautical Engineer job comes with the responsibility of designing aircraft and thrust systems. He or she is employed in aviation, defence or civil aviation industries. Aeronautical Engineer is generally engaged in the design of aircraft and propulsion systems as well as the analysis of building materials and aircraft's aerodynamic performance. The role of an Aeronautical Engineer may involve assembling parts of aircraft, testing and maintaining them.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
Are you searching for an 'airline pilot job description'? An airline pilot or airline commander flies aircraft and helicopters to provide transportation to passengers or cargo. The airline pilot operates the engines of the aircraft and controls them to navigate and fly the airplane. The ability to learn new technologies every time and to stay up-to-date with the changes in the industry is what aviators should possess. The career as airline pilot is also one of the highest-paid professionals and the job is quite coveted.
Welding Engineer Job Description: A Welding Engineer work involves managing welding projects and supervising welding teams. He or she is responsible for reviewing welding procedures, processes and documentation. A career as Welding Engineer involves conducting failure analyses and causes on welding issues.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
Individuals who opt for a career as an environmental engineer are construction professionals who utilise the skills and knowledge of biology, soil science, chemistry and the concept of engineering to design and develop projects that serve as solutions to various environmental problems.
A Safety Manager is a professional responsible for employee’s safety at work. He or she plans, implements and oversees the company’s employee safety. A Safety Manager ensures compliance and adherence to Occupational Health and Safety (OHS) guidelines.
A Conservation Architect is a professional responsible for conserving and restoring buildings or monuments having a historic value. He or she applies techniques to document and stabilise the object’s state without any further damage. A Conservation Architect restores the monuments and heritage buildings to bring them back to their original state.
A Structural Engineer designs buildings, bridges, and other related structures. He or she analyzes the structures and makes sure the structures are strong enough to be used by the people. A career as a Structural Engineer requires working in the construction process. It comes under the civil engineering discipline. A Structure Engineer creates structural models with the help of computer-aided design software.
Highway Engineer Job Description: A Highway Engineer is a civil engineer who specialises in planning and building thousands of miles of roads that support connectivity and allow transportation across the country. He or she ensures that traffic management schemes are effectively planned concerning economic sustainability and successful implementation.
Are you searching for a Field Surveyor Job Description? A Field Surveyor is a professional responsible for conducting field surveys for various places or geographical conditions. He or she collects the required data and information as per the instructions given by senior officials.
Individuals who opt for a career as geothermal engineers are the professionals involved in the processing of geothermal energy. The responsibilities of geothermal engineers may vary depending on the workplace location. Those who work in fields design facilities to process and distribute geothermal energy. They oversee the functioning of machinery used in the field.
Individuals who opt for a career as a geologist are required to study the earth's s structure and its various components that are present in solid, liquid, and gaseous forms. In engineering geologist jobs are often found assisting mining companies in the search for precious minerals apart from doing their regular research and survey. Jobs in geology are expected to venture out to remote spots, staying there for a considerable period, regulating the entire group, and persuading colleagues is not a simple activity for everybody. In this article, we will also discuss geologist career path geologist salary in India and geologist career scope.
Energy efficiency engineering is a broad field of engineering which deals with energy efficiency, energy services, facility management, plant engineering, and sustainable energy resources. Energy efficiency engineering is one of the most recent engineering disciplines to emerge. The field combines the knowledge and understanding of physics, chemistry, and mathematics, with economic and environmental engineering practices. The main job of individuals who opt for a career as an energy performance engineer is to find the most efficient and sustainable path to operate buildings and manufacturing processes.
Individuals who opt for a career as energy performance engineers apply their understanding and knowledge to increase efficiency and further develop renewable sources of energy. The energy efficiency engineers also examine the use of energy in those procedures and suggest the ways in which systems can be improved.
A career as a Petroleum engineer is concerned with activities related to producing petroleum. These products can be in the form of either crude oil or natural gas. Petroleum engineering also requires the exploration and refinement of petroleum resources. Therefore, a career as a petroleum engineer comes up with oil and gas onshore jobs. There are also desk jobs in the petroleum industry. In layman’s terms, a petroleum engineer is a person who finds the best way to drill and extract oil from oil wells. Individuals who opt for a career as petroleum engineer also tries to find new ways to extract oil in an efficient manner.
A career as Transportation Planner requires technical application of science and technology in engineering, particularly the concepts, equipment and technologies involved in the production of products and services. In fields like land use, infrastructure review, ecological standards and street design, he or she considers issues of health, environment and performance. A Transportation Planner assigns resources for implementing and designing programmes. He or she is responsible for assessing needs, preparing plans and forecasts and compliance with regulations.
A career as a civil engineer is of great importance for the infrastructural growth of the country. It is one of the most popular professions and there is great professional as well as personal growth in this civil engineering career path. There is job satisfaction in this civil engineering career path, but it also comes with a lot of stress, as there are multiple projects that need to be handled and have to be completed on time. Students should pursue physics, chemistry and mathematics in their 10+2 to become civil engineers.
A career as a Transportation Engineer is someone who takes care of people's safety. He or she is responsible for designing, planning and constructing a safe and secure transportation system. The transportation sector has seen a huge transformation and is growing day by day and improving every day.
As a Transport Engineer, he or she needs to solve complex problems such as accidents, costs, traffic flow, and statistics. A Transport Engineer also collaborates for projects with some other companies.
Loco Pilot's position is common to the Indian Railways under the Ministry of Railways in the country. A Loco Pilot is the individual needed to drive the trains and provide effective monitoring of the trains during transit. This is a senior position in the Indian Railways, and no applicant is employed directly as a Loco Pilot. The Indian Railways undertake entrance tests to recruit the Assistance Loco Pilots, who could then be promoted to the Loco Pilots Post or to other management positions.
Asia's Only University with the Highest US & UK Accreditation
Ranked #52 among universities in India by NIRF | Highest CTC 50 LPA | 100% Placements | Last Date to Apply: 31st May
100% Placement Record | Highest CTC 42 LPA | NAAC A++ Accredited | Ranked #68 in India by NIRF Ranking 2023
Merit Scholarships | NAAC A+ Accredited | Top Recruiters : E&Y, CYENT, Nvidia, CISCO, Genpact, Amazon & many more
1000+ Recruiters | 450+ Patents | 50000+ Alumni network
Ranked #31 by Education World