| |
328 Search Results Found |
| 1 |
Forum: Papyrus «»
Posted on: Sun, 29 May 2022 16:24 «»
By: Carsten Pitz
My experience with Papyrus on a M1 based MacBook
Hi,
after some years of Apple abstinence I purchased an Apple Silicon M1 based Apple MacBook Pro 13 as my new traveling laptop. Just because last week my Microsoft Surface Book 3 13.5 ceased life :-(
Overall performance is fair, but somehow the start...
|
| 2 |
Forum: Eclipse Scout «»
Posted on: Mon, 07 March 2022 14:00 «»
By: J D
Re: Populating smartfields and list boxes from a JSON document
Hi there Andre,
Thanks a lot for the tips. I've had to do a lot of refactoring and reading the Scout documentation again.
Thus far, I've gotten the SmartFields and ListBoxes in my application to work. I have tended to retrieve the information I need...
|
| 3 |
Forum: C / C++ IDE (CDT) «»
Posted on: Sun, 05 December 2021 20:04 «»
By: Rud Merriam
Syntax Errors Indicated for Valid Lambda
Eclipse CDT 2021-09 (4.21.0)
Ubuntu 20.04
gcc version 11.1.0 (Ubuntu 11.1.0-1ubuntu1~20.04)
The following code compiles and runs fine. But the lambda decode_enum4 is underlined with "syntax errors" in the editor. Not a big problem with this...
|
| 4 |
Forum: Java Development Tools (JDT) «»
Posted on: Thu, 25 November 2021 04:51 «»
By: Christian Arcadio
Re: Content Assist Lag when typing a new object with
Hi.
It occurs on my install even after a fresh Eclipse installation with a new workspace.
Additionally, it seems that the lag kind of depends on the JRE used. I say this because between fresh projects using a different JRE on creation, content assist...
|
| 5 |
Forum: Java Development Tools (JDT) «»
Posted on: Wed, 24 November 2021 13:48 «»
By: Christian Arcadio
Content Assist Lag when typing a new object with
Hi. On my installation, Eclipse lags every time I try to code a new object using Content Assist. I couldn't get any info regarding this, so I figured I would post something in here.
I posted a video file below to demonstrate this.
|
| 6 |
Forum: Java Development Tools (JDT) «»
Posted on: Wed, 24 November 2021 13:47 «»
By: Christian Arcadio
Content Assist Lag when typing a new object.
Hi. On my installation, Eclipse lags every time I try to code a new object using Content Assist. I couldn't get any info regarding this, so I figured I would post something in here.
I posted a video file below to demonstrate this.
|
| 7 |
Forum: Java Development Tools (JDT) «»
Posted on: Sun, 29 August 2021 16:26 «»
By: Rachanon W
Typing Lag Mac OS 10.14
I have just downloaded Eclipse 2021-06 from the installer. When I try typing out the code, I get horrible rendering lag when typing parenthesis (), square brackets [], angled brackets <> and curly brackets {}. When typing these one of the sides, the ...
|
| 8 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Sun, 04 April 2021 00:50 «»
By: Barry Dowdeswell
Re: Running forte on 64-bit Raspberry Pi 4 running Ubuntu 20.04.2 LTS
Thank you Alois,
The 32-bit runtime is proving to be fine for the thesis examples I am building in 4diac. The Raspberry Pi 4 is performing very well with FORTE, far faster than I expected. The GPIO interfaces are also working fine.
At the moment, the c...
|
| 9 |
Forum: TMF (Xtext) «»
Posted on: Mon, 10 August 2020 05:12 «»
By: Mirko Raner
Re: Xtend Maven issues after upgrading to Java 9
Thanks, @christian and @lorenzo for the input on this! I also can confirm that it's apparently the --release option that causes the trouble. For my particular project, I was able to work around the issue by explicitly specifying an empty maven.compiler.rel...
|
| 10 |
Forum: Eclipse Platform «»
Posted on: Sat, 04 July 2020 23:55 «»
By: Hernán González
Eclipse IDE for RCP (2020-06) hangs opening build.xml files
I've been using Eclipse IDE for RCP since 2008. Latest version exhibits many freezing problems. I've experienced frequent and fatal IDE freezes when opening ANT buildfiles.
The following steps don't reproduce the total freeze I experience in my develop...
|
| 11 |
Forum: Eclipse Titan «»
Posted on: Fri, 10 January 2020 15:01 «»
By: Harald Welte
problems contributing to DIAMETER_ProtcolModule_Generator / gerrit out of sync?
Hi!
I have a fix for the titan.ProtocolModules.DIAMETER_ProtocolModule_Generator documentation. However, when trying to push it to ssh://review.gerrithub.io:29418/eclipse/titan.ProtocolModules.DIAMETER_ProtocolModule_Generator, gerrithub refuses as fol...
|
| 12 |
Forum: Newcomers «»
Posted on: Mon, 02 September 2019 12:52 «»
By: James Doohan
Re: Installing Eclipse C++ IDE
Ed, thanks I had a look at that thread. It might have been helpful on the part of the Eclipse project to have provided some information on the dependencies required. I can find absolutely nothing on the website, and although I do see some information, pred...
|
| 13 |
Forum: Java Development Tools (JDT) «»
Posted on: Thu, 21 February 2019 20:39 «»
By: Stephan Herrmann
Re: Eclipse complains JUnit in Modular project
What is your definition of "fully"? :)
We in JDT clearly noticed that take-up of Java 9 is slower, than, e.g. adoption of lambdas was back then. This means, bug reports are coming in with a significant lag after Java 9 GA. Just during the ...
|
| 14 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Tue, 22 January 2019 02:46 «»
By: Daniel Ng
Re: v1.10.1 Woes
HI Dr Alois,
It is fairly easy to reproduce the issue with my application. I've recorded three videos to replicate the problem for you.
https://drive.google.com/open?id=1ThmG4Q7h0IRHWeQMmlx05oA4-q0AOcdy
In V1, I could easily monitor 3...
|
| 15 |
Forum: PHP Development Tools (PDT) «»
Posted on: Tue, 15 January 2019 16:56 «»
By: Developer Developer
Re: Eclipse Photon Incredibly Laggy and Unusable
Downloading the latest version of Eclipse (Dec 2018) fixed the lag issues. Guess it was an issue with the specific [latest] version available at the time. Thanks.
|
| 16 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 20 November 2018 23:31 «»
By: Stephan Herrmann
Re: Horrible Lag
If the "lag" materializes into "freezes" of more than a second or so, you might find out more by taking a few stack traces, see also https://wiki.eclipse.org/How_to_report_a_deadlock
If it's about shorter periods, which you cannot ea...
|
| 17 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 20 November 2018 05:41 «»
By: Nicole Spicer
Re: Horrible Lag
Yep. I tried to set it to use 3GB, didn't seem to effect the lag at all.
I'm currently just using a virtual machine with Eclipse installed on it, and *that* works fine, for some reason. A bit overkill, but it works, so meh.
The VM is using the same OS ...
|
| 18 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 16 November 2018 06:01 «»
By: Nicole Spicer
Horrible Lag
I've been using Eclipse for the past handful of years without any issues.
But since I've recently upgraded my PC, I've been having a constant issue that forced me to switch to a different IDE for awhile.
Whenever I open eclipse (New install, default ever...
|
| 19 |
Forum: Eclipse Titan «»
Posted on: Wed, 17 October 2018 12:27 «»
By: Antal Wu-Hen-Chang
Re: Performance Testing of OPC-UA
Hello Avdoot,
the OPC_UA adapter provides functions for encoding/decoding OPC-UA messages to/from its TTCN-3 language representation. It also has a test project, where the IPL4 test port is used for sending OPC-UA message over TCP.
Both the OPC-UA adapte...
|
| 20 |
Forum: PHP Development Tools (PDT) «»
Posted on: Thu, 04 October 2018 14:47 «»
By: Developer Developer
Eclipse Photon Incredibly Laggy and Unusable
Does anyone else have issues with the Eclipse Photon IDE being incredibly laggy? I had a previous version of Eclipse running on a 5 year old Windows 7 machine used to develop the same projects that was running smoothly. Since recently upgrading to a Window...
|
| 21 |
Forum: C / C++ IDE (CDT) «»
Posted on: Fri, 21 September 2018 15:03 «»
By: Frédéric Cordier
Re: AmigaOS4 includes files uncorrectly handled
[Sorry, double post, the forum Lag]
|
| 22 |
Forum: TMF (Xtext) «»
Posted on: Wed, 08 August 2018 10:26 «»
By: Ed Willink
Re: Xtext upgrade
Hi
I continue to use old style Xtext and with only modest tweaks I can use the latest Xtext release, however I am aware that I am losing out on at least the new formatter. However the significant formatter bugs seem to persist anyway in Xtext/MWE2 edito...
|
| 23 |
Forum: Java Development Tools (JDT) «»
Posted on: Mon, 19 March 2018 10:45 «»
By: Tom Eugelink
Support official javac
Eclipse has been using it own compiler for since ever, and I understand the reason why. But it also is a nuisance, at least to me, because it makes Eclipse lag behind the official Java release. For example; writing Java 9 code still is not working complete...
|
| 24 |
Forum: Papyrus «»
Posted on: Tue, 27 February 2018 11:41 «»
By: Thorsten Schlathölter
Lag because of BuddyClassLoading during XWT Introspection
Hi,
we have embedded Papyrus in our application an experience lags due to the properties view which uses XWT. During creation of the XWT tabs, XWT uses introspection to check for BeanInfo classes. Since papyrus makes uses of buddy class loading there is q...
|
| 25 |
Forum: Papyrus «»
Posted on: Tue, 27 February 2018 11:41 «»
By: Thorsten Schlathölter
Lag because of BuddyClassLoading during XWT Introspection
Hi,
we have embedded Papyrus in our application an experience lags due to the properties view which uses XWT. During creation of the XWT tabs, XWT uses introspection to check for BeanInfo classes. Since papyrus makes uses of buddy class loading there is q...
|
| 26 |
Forum: Remote Application Platform (RAP) «»
Posted on: Wed, 13 September 2017 14:36 «»
By: John Gymer
AutoTab to next field when field is full
We would like to support an auto-tab feature for fields so that a field defined as auto-tab will jump the focus to the next field in the tab sequence when it is 'full' i.e. reached its' text limit (Text#setTextLimit method).
We currently do this with a ...
|
| 27 |
Forum: Newcomers «»
Posted on: Wed, 24 May 2017 13:28 «»
By: Corey Saines
Re: Export to JAR issues
So I cleared the console log, re-ran the JAR and here are the results. Half of them appeared during the lag between double clicking the JAR and the error message. The other half followed the error message.
5/24/17 7:24:44.417 AM ApplicationManager[30604...
|
| 28 |
Forum: GEF «»
Posted on: Tue, 24 January 2017 10:47 «»
By: Miroslav Stefanovic
FXCanvasEx Retina display problem
First of all,
I would like to say big thanks to GEF team on effort so far.
I have developed so far an editor with simple JavaFX blocks inside where I can change block position using drag and drop feature. I'm using Eclipse RCP and AbstractFXEditor as p...
|
| 29 |
Forum: NatTable «»
Posted on: Wed, 18 January 2017 11:23 «»
By: Bartosz Szczypien
Displaying different objects in Nat Table
I would like to say Hello on the forum and say that this Nat Table is insanely good!
I have the problem with displaying different type of objects in the Nat Table. When the data is being rendered (from upper part to the bottom) everything is filled prop...
|
| 30 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 17 November 2016 14:14 «»
By: Samuel Navarro
Eclipse is very slow on Linux
I am running a Fedora 24 OS (with GNOME 3) and I just installed the Eclipse CDT package from the Fedora repositories (Eclipse CDT Neon.1), and it turned out to be extremely slow, but only when writing code or scrolling, the rest of the UI works perfectly a...
|
| 31 |
Forum: BIRT «»
Posted on: Tue, 11 October 2016 22:23 «»
By: Mark Proe
Parameter Dialog slow to load
I upgraded the BIRT Report Designer from 4.4 to 4.6, and I am now experiencing significant performance issues loading the parameter window when running reports. The report parameters contain a list box populated by a large data set (approximately 5000 row...
|
| 32 |
Forum: NatTable «»
Posted on: Thu, 22 September 2016 14:03 «»
By: Bernhard Buss
NatTable Drawing FPS / Performance vs SWT table
Hello Dirk,
We are using NatTable in an editor in an eclipse RCP application, and for that Use Case it is indispensable because we need all the extra features like layers, grouped rows/columns, various row size, cell formatting and column handling, filt...
|
| 33 |
Forum: Jubula «»
Posted on: Wed, 01 June 2016 14:28 «»
By: Eric rosen
How to execute headless mode in jubula?
Hi, I'm trying to use Jubula stand alone in order to do some testing on a swing application. I've made my tests, but whenever I run the program, I see the actual GUI come up and see the mouse move around in order to click on things, put in info, ect. I was...
|
| 34 |
Forum: Ecore Tools «»
Posted on: Mon, 18 April 2016 11:19 «»
By: Cedric Brun
Re: EClass information view
Hi Pierre !
Sorry for the lag, I was in vacation last week.
Indeed EcoreTools would be a right place for this and we would be interested. We already have two basic views for references and hierachy but they are only reacting to EClass selections. I g...
|
| 35 |
Forum: Ecore Tools «»
Posted on: Wed, 15 July 2015 16:13 «»
By: Cedric Brun
Re: Ecore diagram editor does not load when I click the (aird) file
Hi, sorry for the lag.
This might happen depending on the perspective you are using, please try with the "Modeling" perspective.
You should be able to load the .aird using right-click=>open and then see the corresponding diagrams as childs...
|
| 36 |
Forum: C / C++ IDE (CDT) «»
Posted on: Wed, 04 February 2015 16:36 «»
By: Matt Henslee
Eclipse Performance Optimizations
Our team is trying to find a way to improve the performance of the Eclipse CDT (Luna with JDK 1.7) in our environment. We currently connect remotely from a Windows box (W7 64-bit, Pentium D @ 3 GHz, 4GB RAM) to a Linux VM (4GB RAM, Xeon @ 2.7GHz) and run E...
|
| 37 |
Forum: NatTable «»
Posted on: Fri, 23 January 2015 12:37 «»
By: Xavier Wolfs
Re: How to get live updates while maintaining a sorted tree
Follow-up with where we went wrong, so other people might learn from our mistake.
To quickly summarize, what we were seeing was that our sorted tree was seperating parents from children once we started updating rows. Eventually, we discovered that this ...
|
| 38 |
Forum: C / C++ IDE (CDT) «»
Posted on: Sat, 22 November 2014 04:01 «»
By: phan han
Đăng Ký Mạng FPT Quận 8, Hồ Chí Minh City
FPT Telecom khuyến mại lắp mạng fpt gò vấp, TPHCM được áp dụng trong tháng dành cho hộ gia đình và sinh viên có nhu cầu đăng ký lắp đặt camera gò vấp và fpt giá rẻ với gói cước chỉ 270.000đ/ tháng. Ngoài ra khi khách hàng đăng ký truyền hình FPT sẽ được ư...
|
| 39 |
Forum: Standard Widget Toolkit (SWT) «»
Posted on: Thu, 13 November 2014 09:52 «»
By: Ludwig Moser
Re: How to debug this?
that was my first thought too!
i put log statements on start end end of each method (logging even the time it takes)
but there is nothing i can track down, which causes that lag.
in the meantime i seperated my control to a standalone application.
in ...
|
| 40 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 12 September 2014 19:15 «»
By: Michael Murphey
Eclipse typing slowly
I'm using eclipse luna on Oracle Java 8 on Ubuntu 14.04.1. When I type to edit a file the words on screen lag behind what I'm typing on my keyboard. There is a noticeable delay between when I type a word and when that word appears on the screen. Eclipse do...
|
| 41 |
Forum: EMF «»
Posted on: Tue, 26 August 2014 09:22 «»
By: Esteban Dugueperoux
Re: [CDO] Low performance of CDOResource.getURI()
Hi Leonid and Ed,
Note that MappedResourceLocator could have issue with CDOResource in
case of changed CDOResource's URI. Because on CDOResourceImpl.setURI()
call cdo doesn't trigger EMF notification as it is done in
ResourceImpl.setURI().
Leon...
|
| 42 |
Forum: EMF «»
Posted on: Sun, 24 August 2014 15:17 «»
By: Ed Merks
Re: [CDO] Low performance of CDOResource.getURI()
Leonid,
You might try creating a
org.eclipse.emf.ecore.resource.impl.ResourceSetImpl.MappedResourceLocator.
Just creating one adds it as an adapter of the ResourceSet (and
contained resources), and then it's used to preemptively maintain a
perfe...
|
| 43 |
Forum: EMF «»
Posted on: Sun, 24 August 2014 00:14 «»
By: Leonid Ripeynih
[CDO] Low performance of CDOResource.getURI()
Hello!
I have encoutered some problems with CDOResource.getURI() performance, and subsequent problems with AbstractCDOView.newResourceInstance().
First, each call to getURI is getting about 150ms on my machine (Core i5, 8G RAM, Heap 300Mb/1G). From C...
|
| 44 |
Forum: Eclipse Scout «»
Posted on: Wed, 16 July 2014 12:44 «»
By: Jeremie Bresson
Re: Page closing issue
Duplicate with this thread. (Due to Eclipse Forum Lag).
|
| 45 |
Forum: Eclipse 4 «»
Posted on: Thu, 05 June 2014 17:02 «»
By: Paweł Doleciński
Applying CSS on every Activate event
Hi,
I am working with the recent version of Eclipse Luna.
I did a small application based on New Project wizard then I added one additional part with Scrolled Composite inside and 500 text fields. While switching beetwen tabs I see a huge lag.
It does...
|
| 46 |
Forum: Target Management «»
Posted on: Wed, 21 May 2014 10:55 «»
By: Vincas Dargis
How to export project files to remote server without creating root project directory?
Hello,
I am trying to setup Eclipse (Kepler SR2) to work with web-based projects (PHP, HTML, JavaScript). using Web Development Tools, PHP Development Tools and Remote System Explorer, as alternative to Aptana (because of it's bundeled PyDev version lag...
|
| 47 |
Forum: Standard Widget Toolkit (SWT) «»
Posted on: Tue, 25 March 2014 14:34 «»
By: Michael Whapples
Accessibility problems in file dialog
I don't know whether this is a bug or not, hence I want to ask for some advice first.
I am working on BrailleBlaster (www.brailleblaster.org) which uses SWT for its GUI. I have noticed with some screen readers that they do not report movement in the ope...
|
| 48 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 14 March 2014 10:17 «»
By: Jonas Helming
Re: [EMF Forms] Performance problems while switching between opened views
Hi Pawel,
could you provide a test case for that? It is hard to reproduce that.
Best regards
Jonas
Am 13.03.2014 11:58, schrieb Paweł Doleciński:
> Hi,
>
> I am using EMF Forms to open quite huge objects.
> When I have rendered...
|
| 49 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Thu, 13 March 2014 10:58 «»
By: Paweł Doleciński
[EMF Forms] Performance problems while switching between opened views
Hi,
I am using EMF Forms to open quite huge objects.
When I have rendered two views: one with object having 300 controls and second with 100 controls, while switching between tabs I've noticed annoying rendering lag.
As everything was already render...
|
| 50 |
Forum: Simultaneous release «»
Posted on: Wed, 29 January 2014 11:54 «»
By: Luke Usherwood
Time Lag between the download site and the Eclipse Luna update URL?
Maybe I've worked it out while writing it, but since it took me > 1 hour research, it would be nice if someone can confirm it.
I would like to upgrade from Eclipse 4.4M3 to 4.4M5, available from the Eclipse Project download page 6 days ago. (Inciden...
|
| 51 |
Forum: BPMN 2.0 Modeler «»
Posted on: Thu, 16 January 2014 10:52 «»
By: mhammad makni
Re: extend SequenceFlow
hi Robert;
you've done an excellent job.
could you tell me if it is possible to show the value of lag time as a decoration in the center of Temporaldependency between "[]" : ----------[]---------->
I also wonder about the possibility of sho...
|
| 52 |
Forum: BPMN 2.0 Modeler «»
Posted on: Wed, 01 January 2014 16:48 «»
By: mhammad makni
Re: extend SequenceFlow
hi Robert;
I have two request,
I tried a several time to add a property tab that I can update lagTime through it, so please is there an example that could help.
I also wonder if it is possible to show the value of lag time as a decoration in the cente...
|
| 53 |
Forum: ServerTools (WTP) «»
Posted on: Wed, 18 December 2013 17:17 «»
By: paul Mising name
Re: Kepler - JSP editing slowness
sri yell, did you ever get this resolved? I am experiencing the same issues. 5-8 second lag on pasting text with angle brackets, and 2-3 seconds per character when typing.
I have tried reinstalling WTP (3.5.0, 3.5.1 and 3.5.1 with patches), fresh ins...
|
| 54 |
Forum: EMF «»
Posted on: Tue, 08 October 2013 07:15 «»
By: Ed Merks
Re: EMF Item Providers for interfaces.
Xavipen,
Comments below.
On 07/10/2013 8:04 PM, Xavipen Mising name wrote:
> Hi Ed,
>
> comments below.
>
> Ed Merks wrote on Sat, 05 October 2013 09:41
>> Xavipen,
>>
>> Comments below.
>>
>> On...
|
| 55 |
Forum: Java Development Tools (JDT) «»
Posted on: Mon, 22 July 2013 19:13 «»
By: Feciuc Stelian Teodor
Re: Can't use Eclipse's UI drag-and-drop interface
(lag made me do a double-reply, sorry)
|
| 56 |
Forum: Java Development Tools (JDT) «»
Posted on: Thu, 06 June 2013 16:39 «»
By: Stephan Herrmann
Re: Will Eclipse IDE for Java EE Developers be provided for Kepler?
Not fully correct: the eclipse packages at http://www.eclipse.org/downloads/index-developer.php just lag behind the corresponding (milestone / RC) releases of the Eclipse SDK.
Right now the eclipse-jee-kepler-RC2 package is indeed available for down...
|
| 57 |
Forum: Eclipse Platform «»
Posted on: Wed, 31 October 2012 14:29 «»
By: Mauro Molinari
Re: Toolbar corrupted: how to reset?
Il 29/10/2012 00:43, Kyle Fox ha scritto:
> As a side-note, there does appear to be a problem with the debug
> perspective for me. When I open eclipse in the Java EE perspective, I'm
> able to switch between tabs (files) with no lag. Immediat...
|
| 58 |
Forum: Eclipse Platform «»
Posted on: Sun, 28 October 2012 23:43 «»
By: Kyle Fox
Re: Toolbar corrupted: how to reset?
I'm having the same problem. =(
After taking the latest Juno updates via the Help >> Check for Updates menu, I started having problems switching between tabs. I realized the issue was related to the debug perspective, and therefore, tried to res...
|
| 59 |
Forum: NatTable «»
Posted on: Wed, 17 October 2012 00:05 «»
By: Jay Norwood
Re: column width
The getPreferredColumnWidth is in
org.eclipse.nebula.widgets.nattable.resize.MaxCellBoundsHelper
I do have a suggestion that getPreferredColumnWidth shouldn't be going over all the rows ... just the visible ones viewed when you scroll into a new s...
|
| 60 |
Forum: NatTable «»
Posted on: Tue, 16 October 2012 19:25 «»
By: Jay Norwood
Re: column width
I tried your cellPainter example from the faq and added this code to the Big_data example. This works very much faster than the IOverlayPainter example that I experimented with. However, updates lag increasingly as you scroll to the right, and it seems t...
|
| 61 |
Forum: TMF (Xtext) «»
Posted on: Thu, 20 September 2012 11:48 «»
By: Sebastian Zarnekow
Re: Odd error using IJvmTypeProvider
Hi Aaron,
if a reasonable sized projects uses 100ms in that routine but opening a
file (for the second time?) takes 2 secs, I'm reluctant to include the
code. It introduces additional complexity (even though only minor) but
does not address a seri...
|
| 62 |
Forum: TMF (Xtext) «»
Posted on: Thu, 20 September 2012 10:43 «»
By: Aaron Digulla
Re: Odd error using IJvmTypeProvider
I timed the calls. To my surprise, they weren't that high to begin with. In a big project (188 JARs), the computation takes around 100ms. My patch about halves this figure.
Most of that is probably spent in EcorePlugin.computePlatformURIMap() but I ...
|
| 63 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 31 August 2012 14:33 «»
By: b x
Re: how to synchronize files in eclipse
thanks, there is some lag after changing the code
|
| 64 |
Forum: Java Development Tools (JDT) «»
Posted on: Wed, 29 August 2012 21:44 «»
By: b x
how to synchronize files in eclipse
hi,
I changed the source code of a java file outside eclipse, I know that I could change the configuration of eclipse to syncronize the files, but there is some lag time. is there any function could syncronize the files without lag?
|
| 65 |
Forum: Newcomers «»
Posted on: Mon, 27 August 2012 02:31 «»
By: Christopher Scoggins
seq.exe has stopped working
I keep getting the error "seq.exe has stopped working". It appears the first time I open the "Include" sub driectory of a new project, and also whenever I try to build a new project. The Projects do not build correctly either. This star...
|
| 66 |
Forum: Remote Application Platform (RAP) «»
Posted on: Sat, 18 August 2012 11:54 «»
By: Rüdiger Herrmann
Re: Switching Views taking a long time on first attempt to load that view.
George,
what exactly do you mean with "switch view"? Are you opening a vie wfor
the first time?
Anyhow, this shouldn't take seconds - views usually open almost
instantly. How many widgets does your view create initially?
Regards,
Rüdi...
|
| 67 |
Forum: Remote Application Platform (RAP) «»
Posted on: Fri, 17 August 2012 17:59 «»
By: George R Malary
Re: Switching Views taking a long time on first attempt to load that view.
I stripped out all jobs, and only left widget creations, and listener attachments, and it still seems to take a few seconds to switch views. I come to the conclusion that lag is normal, for creation of objects and listeners, and that all we can do is bloc...
|
| 68 |
Forum: TMF (Xtext) «»
Posted on: Mon, 23 July 2012 10:11 «»
By: Aaron Digulla
Re: Xtext editors take a long time to open
Yes and yes. I have 79 JARs on the classpath and some were converted from Eclipse bundles, so the code does find many MANIFEST.MF that it can process.
At first glance, I don't see why the code is slow (reading 79 manifests from JARs on the classpath...
|
| 69 |
Forum: Virgo «»
Posted on: Sat, 09 June 2012 20:15 «»
By: Tim D
Jetty WebSocket gets slow
Running Jetty websockets on a server to an android client. Typically the traffic flows fine, however sometimes things lag and a simple text message takes minutes to be received. It also often appears that if I send another message a previous in transit m...
|
| 70 |
Forum: Newcomers «»
Posted on: Thu, 19 January 2012 10:37 «»
By: Jean-Philippe Schneider
Customizing context menus --double post--
-- sorry --
it seems there is some lag on creating topic...
|
| 71 |
Forum: BIRT «»
Posted on: Sun, 08 January 2012 23:59 «»
By: Missing name Missing name
slight lag when running first report
Hi All,
When I run a BIRT report for the first time, it takes a while to get to the progress bar, then a while to finally render the report. Every time I view the same report after that initial report, it goes much much faster.
It is like something is ...
|
| 72 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 23 November 2011 12:27 «»
By: dominik
Re: Slow save of smarty template files
On 2011-11-21 21:14, truckeetrout wrote:
> dominik:
>
> Thanks for your suggestions. The only builders on the project(s) are Validation
> & Script Builder. Shutting off either one has no effect. I did not try
> shutting off both...
|
| 73 |
Forum: PHP Development Tools (PDT) «»
Posted on: Mon, 21 November 2011 20:14 «»
By: truckeetrout
Re: Slow save of smarty template files
dominik:
Thanks for your suggestions. The only builders on the project(s) are Validation & Script Builder. Shutting off either one has no effect. I did not try shutting off both.
The *.tpl files (Smarty templates) open without any lag in a tex...
|
| 74 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 16 November 2011 12:53 «»
By: dominik
Re: Slow save of smarty template files
On 2011-11-14 22:56, truckeetrout wrote:
> [Note: this is a cross-post of a similar message at the smarty forum that rules
> prevent me from linking here.]
>
> After a hiatus of a couple of years I'm back trying to build a project that
&g...
|
| 75 |
Forum: Jubula «»
Posted on: Fri, 26 August 2011 21:07 «»
By: Michael Nesterenko
veryyy slow aut configuration with remote auts
Hello,
I have started aut agent on remote machine, when I select that agent on AUT configuration dialog, it freezes for rather long time without any sign of progress. I have looked if it sends any data to remote agent, and found no active connections to...
|
| 76 |
Forum: Standard Widget Toolkit (SWT) «»
Posted on: Tue, 26 July 2011 11:06 «»
By: Mark Fishman
neither paintItem nor paintListener working well for rendering in my table
I have a large, virtual table (50 columns by 1000's of rows) on a windows platform and I am trying to setup one of the columns such that that column can display multiple images in its cells.
My first attempt to accomplish this goal was to add a listener...
|
| 77 |
Forum: Target Management «»
Posted on: Mon, 20 June 2011 14:02 «»
By: David McKnight
Re: RSE vs local project with linked remote files
Hi,
Depending on the type of project and files you're working with, there may be
a lot of things going on when you open and/or save a file. It's possible
that other project resources need to be accessed (multiple times in some
cases) during openi...
|
| 78 |
Forum: Eclipse Platform «»
Posted on: Fri, 17 June 2011 18:40 «»
By: Paul Webster
Re: How to run only a subset of bundles from an Eclipse installation
well, I suggested using a configuration2/config.ini that starts up only the bundles you need to launch your app. no simpleconfigurator, no bundles.info.
For example, create a minimal sample RCP product (like out of the RCP Mail template) and export it,...
|
| 79 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 27 April 2011 22:54 «»
By: Lee
IDE Slow even w/ Heap usage ~50%, CPU 150%-90%
-CPU usage goes to CPU 150%-90% every time I try to type in an Action file. Result is ~1 char per second
-However, in view or non-php files, there is no lag :/
- state of computer doesn't matter (fresh reboot)
- 2ghz dual core, 3gb of ram macbook
H...
|
| 80 |
Forum: PHP Development Tools (PDT) «»
Posted on: Sat, 16 April 2011 19:20 «»
By: Mark Stanton
Re: Eclipse problem or php?
I've added another 4Gb of RAM to the machine and insisted Eclipse takes 1Gb of heap (I think) space.
I still get the problem, although it appears to be in a difference place.
It seems to be fairly consistent (now, at least), in the constructor of the...
|
| 81 |
Forum: TMF (Xtext) «»
Posted on: Fri, 01 April 2011 00:00 «»
By: Krzysztof Kowalczyk
Xtend2 issues
Hi,
I hope this is the proper forum to discuss xtend2
So I have some problems, that are probably known, but to be sure I will point them out. I use Eclipse M6 Modeling package downloaded from eclipse.org and Xtext 2 instaled with modeling components...
|
| 82 |
Forum: GEF «»
Posted on: Mon, 06 December 2010 16:20 «»
By: Carlo Salinari
draw2d interaction sequence
This is a multi-part message in MIME format.
--------------070709050504070903060409
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Hi,
I'm reading Gronback's "Eclipse Modeling Project ...".
In chapter 9, page ...
|
| 83 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 03 November 2010 21:52 «»
By: Un
Re: Alternative to Eclipse PDT... too slow
I'm stuck with the same issue and it's extremely frustrating. At first PDT worked great and lag-free for some of my smaller-scale projects, but once I moved my production projects over from NetBeans I started seeing the 1~2 second lag between each keystrok...
|
| 84 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 20 October 2010 21:08 «»
By: Brade
Re: Alternative to Eclipse PDT... too slow
I registered just to voice my agreement with this. I moved back to Eclipse from Aptana recently because of all the retarded stuff they've done in their latest version, including far worse PHP support. I enjoy everything about Eclipse and PDT except for the...
|
| 85 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 13 October 2010 13:45 «»
By: Todd Painton
Re: Alternative to Eclipse PDT... too slow
ARGH. I agree. everything was working fine and now I have unbelievable lag. It is happening only on large php files. Everything was working fine until a day or so ago and now any php file with over 2000 lines has huge lag. Every letter takes about 2-3...
|
| 86 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 12 October 2010 19:42 «»
By: Mike Reed
Re: eclipse has become slow, unresponsive & CPU-bursty
This is the only workspace I have & it's fairly new (4 days old), but it was working fine, so I don't believe that it has anything to do w/ a new workspace.
I've disabled the indexer & turned off code-analysis, but Eclipse is still unresponsive...
|
| 87 |
Forum: Eclipse Foundation «»
Posted on: Fri, 08 October 2010 01:22 «»
By: Evan Clark
Re: More bandwidth!
Seems to have worked great, no lag here
|
| 88 |
Forum: EclipseLink «»
Posted on: Mon, 27 September 2010 15:55 «»
By: James Sutherland
Re: Clustering Jboss with Eclipselink
Generally it is a good idea to have server affinity enabled to ensure a client's session uses the same server. This avoids excessive synchronization and replication costs.
EclipseLink supports both asynchronous and synchronous cache coordination. asyn...
|
| 89 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 24 August 2010 16:29 «»
By: Nitin Dahyabhai
Re: JSP editor: unusably slow - how to disable? (HELIOS)
On 8/24/2010 11:01 AM, alexandra wrote:
> I highly suspect the "design" mode of the new JSP editor to be causing
> the extreme lag (to the point Windows reports the application is not
> responding - and it's config'd for 512M). I had ...
|
| 90 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 24 August 2010 15:01 «»
By: alexandra
JSP editor: unusably slow - how to disable? (HELIOS)
I highly suspect the "design" mode of the new JSP editor to be causing the extreme lag (to the point Windows reports the application is not responding - and it's config'd for 512M). I had problems with the JSP editor in Galileo such that JSPs ne...
|
| 91 |
Forum: PHP Development Tools (PDT) «»
Posted on: Sat, 07 August 2010 08:27 «»
By: Kristian Wiborg
Happy about coding again
This week I have switched from NetBeans for PHP to Eclipse PDT, and I'm really glad I did! I really like NetBeans, but it doesn't play nice with the setup we use at work. We edit files directly on a remote server, and quite often the server is a bit slow a...
|
| 92 |
Forum: Equinox «»
Posted on: Wed, 04 August 2010 19:31 «»
By: Laurent Marchal
P2 bug exporting product in Helios 3.6
This is a multi-part message in MIME format.
--------------040301060809080607090506
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I was trying Helios today, but I can not export my p2 enabled RCP ...
|
| 93 |
Forum: Virgo «»
Posted on: Fri, 30 July 2010 09:40 «»
By: Chris Frost
Re: Uses constraint when adding org.springframework.spring
Hi Anthony,
Sorry we didn't get to you sooner, the dev team for Virgo is based in England so there is a little time lag. Glad to hear your trying OSGi out, I have a few comments from what you've said.
Uses violations occur when the different dependen...
|
| 94 |
Forum: Virgo «»
Posted on: Thu, 06 May 2010 14:47 «»
By: Dmitry Sklyut
Speeding up resolution and server start up
Hi All,
I think this issue will come up sooner than later and I would like to start a discussion early and maybe see if there are some ways to progressively adress it before initial Virgo release.
The issue I am talking about is related and very simi...
|
| 95 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 16 April 2010 21:48 «»
By: Miles Parker
Re: [EEF] Widgets not using property descriptors?
Goulwen Le Fur wrote on Tue, 30 March 2010 23:02
> Hi miles, sorry for the lag, I was at Econ ;)
>
> You're right xwe don't use EMF.edit facilities (and logic) to populate
> our widget. We plan to fix this to the next releases.
Hi Go...
|
| 96 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 31 March 2010 07:37 «»
By: Goulwen Le Fur
Re: [EEF] Widgets not using property descriptors?
Hi miles, sorry for the lag, I was at Econ ;)
You're right xwe don't use EMF.edit facilities (and logic) to populate
our widget. We plan to fix this to the next releases.
Regards,
--
Goulwen
Miles Parker a écrit :
>
>
> Hi guy...
|
| 97 |
Forum: B3 «»
Posted on: Mon, 15 March 2010 13:31 «»
By: Henrik Lindberg
newversion of b3 book uploaded
Hi,
a new version (0.3) of the draft b3 book have been uploaded.
The following issues have been fixed:
- select-switch in repository configuration documented
- reported typos fixed
- general eclipse technology part moved to appendix
- b3expressio...
|
| 98 |
Forum: Mylyn «»
Posted on: Fri, 02 October 2009 16:47 «»
By: Miles Parker
Re: [eclipse bugzilla] Lag in updating repos info?
On 2009-10-01 23:47:28 -0700, Maarten Meijer <mm105@xs4all.nl> said:
> Hi Miles,
>
> The eclipse bugzilla configurationj is cached and updated once per hour
> to reduce server load as Mylyn was the #1 requester of config info ...
|
| 99 |
Forum: Mylyn «»
Posted on: Fri, 02 October 2009 06:47 «»
By: maarten meijer
Re: [eclipse bugzilla] Lag in updating repos info?
Hi Miles,
The eclipse bugzilla configurationj is cached and updated once per hour
to reduce server load as Mylyn was the #1 requester of config info that
was generated every time with a script. I forgot the bug# but I worked
on that.
To update ...
|
| 100 |
Forum: Mylyn «»
Posted on: Thu, 01 October 2009 20:20 «»
By: Miles Parker
[eclipse bugzilla] Lag in updating repos info?
One other unrelated question.. I've recently updatd my project info in
Bugzilla. The new components, versions and milestons show up properly
on web interfce but they aren't being populated into tasks I create in
Mylyn. Is there any kind of lag in get...
|
| 101 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 31 July 2009 11:44 «»
By: Juergen Aschenbrenner
[EMF Index] Re: A proposal for improving the WorkspaceSynchronizer.
done,
BTW couldn't help but noticing that there exists some commonalities
between WorkspaceSynchronizer and the EMF Index effort.
The WS falls short notifying events connected to resources added to the
workspace.
Maybe the WS would be more use...
|
| 102 |
Forum: EMF «»
Posted on: Fri, 31 July 2009 11:44 «»
By: Juergen Aschenbrenner
[EMF Index] Re: A proposal for improving the WorkspaceSynchronizer.
done,
BTW couldn't help but noticing that there exists some commonalities
between WorkspaceSynchronizer and the EMF Index effort.
The WS falls short notifying events connected to resources added to the
workspace.
Maybe the WS would be more use...
|
| 103 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 31 July 2009 11:44 «»
By: Juergen Aschenbrenner
[EMF Index] Re: A proposal for improving the WorkspaceSynchronizer.
done,
BTW couldn't help but noticing that there exists some commonalities
between WorkspaceSynchronizer and the EMF Index effort.
The WS falls short notifying events connected to resources added to the
workspace.
Maybe the WS would be more use...
|
| 104 |
Forum: EMF «»
Posted on: Fri, 31 July 2009 10:30 «»
By: Boris Gruschko
Re: A proposal for improving the WorkspaceSynchronizer.
Hi Juergen,
could you please file a bug on EMF Transaction.
I'll have to evaluate the impact of the proposed change.
Thanks,
Boris
"Juergen Aschenbrenner" <juergen.aschenbrenner@gmail.com> wrote in message
news:h4ubcp$5ep...
|
| 105 |
Forum: EMF «»
Posted on: Fri, 31 July 2009 08:52 «»
By: Juergen Aschenbrenner
A proposal for improving the WorkspaceSynchronizer.
When deleting a resource from workspace, the workspace synchronizer will
fire handleResourceChanged events events on all resources though they
havent been changed.
This is because in the workspace synchronizer in the processDelta
operation in the ...
|
| 106 |
Forum: Buckminster dev «»
Posted on: Wed, 01 July 2009 19:28 «»
By: Johannes Utzig
Re: Dependency Visualization
This is a multi-part message in MIME format.
--------------090701080704040200010105
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I had some time since the last post to work an the visualization a...
|
| 107 |
Forum: Remote Application Platform (RAP) «»
Posted on: Fri, 05 June 2009 11:47 «»
By: Thomas Schindl
Re: Possibility to remove H_SCROLL and V_SCROLL from Tables
This is a multi-part message in MIME format.
--------------080107040207090500090704
Content-Type: text/plain; charset=ISO-8859-15
Content-Transfer-Encoding: 7bit
Hi Ralf,
Cool I've now used SWT.NO_SCROLL for the tables who create the fixed
header...
|
| 108 |
Forum: Buckminster «»
Posted on: Mon, 01 June 2009 09:52 «»
By: Thomas Hallgren
Re: Buckminster & PDE
Hi Alex,
Keep in mind that neither PDE build, nor the P2 publisher has been released yet. What's available are bleeding edge
release candidates. Buckminster consumes that technology so some lag is to be expected. We try to reuse as much as
possible of...
|
| 109 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Thu, 28 May 2009 14:58 «»
By: Bill Hinge
moving compartment in composite custom figure
This is a multi-part message in MIME format.
--------------030105010207070708060704
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi
I'm trying to create a composite figure consisting of a draw2d node ...
|
| 110 |
Forum: M2M (model-to-model transformation) «»
Posted on: Mon, 04 May 2009 01:35 «»
By: Eclipse User
[ATL] containment problem, output model incomplete
Originally posted by: aaniculaesei.gmail.com
This is a multi-part message in MIME format.
--------------040801010004010906030103
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hello people,
I need to tra...
|
| 111 |
Forum: Nebula «»
Posted on: Fri, 01 May 2009 20:33 «»
By: Mircea Luchian
extremely mysterious problem with GridTableViewer and setInput
This is a multi-part message in MIME format.
--------------020906000503030400010309
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hello,
I have a mysterious problem with my GridTableViewer and setInput...
|
| 112 |
Forum: Eclipse Platform «»
Posted on: Fri, 10 April 2009 16:40 «»
By: Ed Merks
Re: manual eclipse update failed
Jürgen,
You can use File->Export->General->Preferences and then import them
elsewhere. What I always do though is open the file in a text editor
and delete any setting that contains an absolute location of the old
workspace or installati...
|
| 113 |
Forum: Eclipse Platform «»
Posted on: Fri, 10 April 2009 16:27 «»
By: Eclipse User
Re: manual eclipse update failed
Originally posted by: juergen.scheffler.gmx.de
Thx! is there a chanceto get all settings (javadoc linkage, code colors
etc) from my "old eclipse IDE" ?
Ed Merks schrieb:
> Jürgen,
>
> This one:
> < http://www.eclipse.o...
|
| 114 |
Forum: Eclipse Platform «»
Posted on: Fri, 10 April 2009 14:26 «»
By: Eclipse User
Re: manual eclipse update failed
Originally posted by: juergen.scheffler.gmx.de
org.e.modeling ?! or which? (cant look right now, because of mirror lag)
|
| 115 |
Forum: GEF «»
Posted on: Mon, 06 April 2009 09:52 «»
By: Eclipse User
Problem with polyline connection
Originally posted by: massimiliano.ziccardi.gmail.com
This is a multi-part message in MIME format.
--------------080601020906070804000308
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi all.
I have i...
|
| 116 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 15:31 «»
By: Eric Rizzo
Re: Long delay + UI locked when saving MANIFESTs
On 4/2/2009 10:01 AM, Stefan Roeck wrote:
> Hi Dave,
>
> we had the same problem and found out that the uses-constraints in our
> target platform bundles are a problem for resolving. There are two
> possible solutions (assuming that you...
|
| 117 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 15:31 «»
By: Eclipse User
Re: Long delay + UI locked when saving MANIFESTs
Originally posted by: eclipse-news.rizzoweb.com
On 4/2/2009 10:01 AM, Stefan Roeck wrote:
> Hi Dave,
>
> we had the same problem and found out that the uses-constraints in our
> target platform bundles are a problem for resolving. There ar...
|
| 118 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 14:01 «»
By: Stefan
Re: Long delay + UI locked when saving MANIFESTs
Hi Dave,
we had the same problem and found out that the uses-constraints in our
target platform bundles are a problem for resolving. There are two
possible solutions (assuming that you don't need uses-constraints, i.e.
don't have multiple versions...
|
| 119 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 14:01 «»
By: Stefan
Re: Long delay + UI locked when saving MANIFESTs
Hi Dave,
we had the same problem and found out that the uses-constraints in our
target platform bundles are a problem for resolving. There are two
possible solutions (assuming that you don't need uses-constraints, i.e.
don't have multiple versions...
|
| 120 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 13:47 «»
By: dave irving
Long delay + UI locked when saving MANIFESTs
Hi,
I have a workspace with several (~10) projects - each being built as an
OSGI bundle. I have a large number of dependencies in my target platform
(~200).
When modifying dependencies for a bundle by editing its MANFIEST.MF, I'm
encountering a...
|
| 121 |
Forum: Plugin Development Environment (PDE) «»
Posted on: Thu, 02 April 2009 13:47 «»
By: dave irving
Long delay + UI locked when saving MANIFESTs
Hi,
I have a workspace with several (~10) projects - each being built as an
OSGI bundle. I have a large number of dependencies in my target platform
(~200).
When modifying dependencies for a bundle by editing its MANFIEST.MF, I'm
encountering a...
|
| 122 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Tue, 31 March 2009 10:19 «»
By: Tatiana Fesenko
Re: How to implement drop-down menu for editing labels in a diagram ?
This is a multi-part message in MIME format.
----++Omea_Parts_Splitter.116911601329647
Content-Type: text/plain; charset=koi8-r
Content-Transfer-Encoding: quoted-printable
Hello=20Sheela,
I=20guess=20you=20are=20talking=20about=20Code=20Assist=2e=2...
|
| 123 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 27 March 2009 15:32 «»
By: Patrick Konemann
[EMF Compare] Reference change detection bug in 3.5M6?
This is a multi-part message in MIME format.
--------------020001000107090004020901
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dear developers,
I think I found a bug concerning reference change dete...
|
| 124 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 27 March 2009 15:32 «»
By: Patrick Konemann
[EMF Compare] Reference change detection bug in 3.5M6?
This is a multi-part message in MIME format.
--------------020001000107090004020901
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dear developers,
I think I found a bug concerning reference change dete...
|
| 125 |
Forum: MoDisco «»
Posted on: Tue, 03 March 2009 17:42 «»
By: Gabriel BARBIER
Re: [Announce] Extended Model Browser
--=_mixed 00613A3DC125756E_=
Content-Type: text/plain; charset="US-ASCII"
Hello Dimitris,
I think that we could manage a generic nsURI ("*" is a good example).
And yes, you will have to implements NameProvider and/or IconProvider ...
|
| 126 |
Forum: MoDisco «»
Posted on: Tue, 03 March 2009 17:42 «»
By: Gabriel BARBIER
Re: [Announce] Extended Model Browser
--=_mixed 00613A3DC125756E_=
Content-Type: text/plain; charset="US-ASCII"
Hello Dimitris,
I think that we could manage a generic nsURI ("*" is a good example).
And yes, you will have to implements NameProvider and/or IconProvider ...
|
| 127 |
Forum: Newcomers «»
Posted on: Fri, 20 February 2009 03:49 «»
By: Walter Harley
Re: Line Numbers Eclipse 3.2.2 CDT
"Charles Pergiel" <c.pergiel@hotmail.com> wrote in message
news:fcd67c694b4d03b725bf75a67dbc7650$1@www.eclipse.org...
>I just checked "Synaptic Package Manager" and, except for Java, 3.2.2 is
>the latest version...
|
| 128 |
Forum: C / C++ IDE (CDT) «»
Posted on: Fri, 06 February 2009 09:27 «»
By: Ralf Flatau
Eclipse CDT remote Debugging Problem
Hi all,
I have a problem to use the remote debugging option under RED-HAT Linux.
I can remote debugging (test on the same maschine) gdb and gdbserver, that
looks like
Target:> gdbserver myhost:2345 --attach 9183
Attached; pid = 9183
Li...
|
| 129 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 07 January 2009 10:17 «»
By: Goulwen Le Fur
Final EEF Proposal
This is a multi-part message in MIME format.
--------------070100030900040507050905
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi everyone,
We have modified the EEF proposal following the advice of ...
|
| 130 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 07 January 2009 10:17 «»
By: Goulwen Le Fur
Final EEF Proposal
This is a multi-part message in MIME format.
--------------070100030900040507050905
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi everyone,
We have modified the EEF proposal following the advice of ...
|
| 131 |
Forum: BIRT «»
Posted on: Mon, 29 December 2008 11:05 «»
By: Janine Pelletier
Financial Crisis makes companies want to know more about their own business.
POWERED by BIRT:
Its almost certain that reduced Business and consumer spending arising
from the global financials crisis will see companies shift from growth and
expansion to a consolidation mode that aims to sustain their current
positions in t...
|
| 132 |
Forum: GEF «»
Posted on: Wed, 10 December 2008 08:42 «»
By: Eclipse User
Re: Question about creating a new Plug-in
Originally posted by: simone.simonesaraceni.it
This is a multi-part message in MIME format.
--------------060908040704010204070800
Content-Type: text/plain; charset=ISO-8859-15
Content-Transfer-Encoding: 7bit
Simone ha scritto:
> Hi, i need to c...
|
| 133 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 08 October 2008 14:04 «»
By: Eclipse User
Re: November is coming soon, do you think you can deliver?
Originally posted by: pobox.verysmall.org
Nick Boldt schrieb:
> PDT 1.0 works with Eclipse 3.3.
> PDT 2.0 works with Eclipse 3.4, due end of December but already workable
> now in N and I builds.
>
> Eclipse 3.5 isn't due until June ...
|
| 134 |
Forum: Eclipse Platform «»
Posted on: Sat, 27 September 2008 10:10 «»
By: Eclipse User
Re: Updating to 3.4.1 (error launcher unable to locate shared library)
Originally posted by: ekkehard.gentz-software.de
Nick Boldt schrieb:
> Copying to eclipse.platform and eclipse.technology.equinox newsgroups.
>
> Ian Leslie wrote:
>> While not really a new comer I do have a newby type question. Now
...
|
| 135 |
Forum: Equinox «»
Posted on: Sat, 27 September 2008 10:10 «»
By: Eclipse User
Re: Updating to 3.4.1 (error launcher unable to locate shared library)
Originally posted by: ekkehard.gentz-software.de
Nick Boldt schrieb:
> Copying to eclipse.platform and eclipse.technology.equinox newsgroups.
>
> Ian Leslie wrote:
>> While not really a new comer I do have a newby type question. Now
...
|
| 136 |
Forum: Eclipse Platform «»
Posted on: Thu, 25 September 2008 15:44 «»
By: Eclipse User
Re: Updating to 3.4.1
Originally posted by: codeslave.ca.ibm.com
Copying to eclipse.platform and eclipse.technology.equinox newsgroups.
Ian Leslie wrote:
> While not really a new comer I do have a newby type question. Now that
> 3.4.1 has been released will I be a...
|
| 137 |
Forum: Equinox «»
Posted on: Thu, 25 September 2008 15:44 «»
By: Eclipse User
Re: Updating to 3.4.1
Originally posted by: codeslave.ca.ibm.com
Copying to eclipse.platform and eclipse.technology.equinox newsgroups.
Ian Leslie wrote:
> While not really a new comer I do have a newby type question. Now that
> 3.4.1 has been released will I be a...
|
| 138 |
Forum: Newcomers «»
Posted on: Thu, 25 September 2008 15:44 «»
By: Eclipse User
Re: Updating to 3.4.1
Originally posted by: codeslave.ca.ibm.com
Copying to eclipse.platform and eclipse.technology.equinox newsgroups.
Ian Leslie wrote:
> While not really a new comer I do have a newby type question. Now that
> 3.4.1 has been released will I be a...
|
| 139 |
Forum: Newcomers «»
Posted on: Thu, 25 September 2008 11:04 «»
By: Ian Leslie
Updating to 3.4.1
While not really a new comer I do have a newby type question. Now that
3.4.1 has been released will I be able to use the update mechanism to
update my install? I just checked and there are no 3.4.1 updates listed
for the SKD or platform.
Is this...
|
| 140 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Thu, 31 July 2008 13:03 «»
By: Eclipse User
Re: Compartments in 2 step meta model
Originally posted by: ML1984.gmx.de
This is a multi-part message in MIME format.
--------------030902090703010104050401
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Hello again.
We have chosen option 1, b...
|
| 141 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 18 July 2008 22:30 «»
By: Matt Seashore
Re: [EMF Compare] GenericMatchEngine - Lists of java.lang.String aren't being matched
This is a multi-part message in MIME format.
--------------080304030905020703050703
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
As I look that this more, it seems that EMF Compare assumes that any
lis...
|
| 142 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Fri, 18 July 2008 22:30 «»
By: Matt Seashore
Re: [EMF Compare] GenericMatchEngine - Lists of java.lang.String aren't being matched
This is a multi-part message in MIME format.
--------------080304030905020703050703
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
As I look that this more, it seems that EMF Compare assumes that any
lis...
|
| 143 |
Forum: Equinox «»
Posted on: Wed, 11 June 2008 05:11 «»
By: Eclipse User
Re: Eclipse-BuddyPolicy Question
Originally posted by: stepper.sympedia.de
This is a multi-part message in MIME format.
--------------030107050406000806020404
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Hi Gunnar,
Thank you for yo...
|
| 144 |
Forum: Eclipse Platform «»
Posted on: Wed, 07 May 2008 03:43 «»
By: Eclipse User
Re: Enhance Presentation's control over the workbench look beyond recent 3.4M6 changes
Originally posted by: totolaricot.mac.com
This is a multi-part message in MIME format.
--------------030800040701060706030007
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Laurent Mihalkovic wrote:
>...
|
| 145 |
Forum: BIRT «»
Posted on: Fri, 25 April 2008 17:29 «»
By: Rafael Weiss
Re: Supported Emitters - BIRT API
This is a multi-part message in MIME format.
--------------080401070705090706090205
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
That's no problem. I attached the corresponding screenshots from the
re...
|
| 146 |
Forum: UML2 Tools «»
Posted on: Thu, 14 February 2008 21:40 «»
By: Mathieu Bertrand
propsheet customization on uml2tools
This is a multi-part message in MIME format.
--------------060603060409070204000803
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I'm trying to make custom tab on classDiagram.gmfgen
(http://wiki...
|
| 147 |
Forum: UML2 Tools «»
Posted on: Thu, 14 February 2008 21:40 «»
By: Mathieu Bertrand
propsheet customization on uml2tools
This is a multi-part message in MIME format.
--------------060603060409070204000803
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I'm trying to make custom tab on classDiagram.gmfgen
(http://wiki...
|
| 148 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Wed, 13 February 2008 12:50 «»
By: Matias
Position of child nodes in a compartment
This is a multi-part message in MIME format.
------=_NextPart_000_0047_01C86E2E.46FB3B80
Content-Type: text/plain;
format=flowed;
charset="iso-8859-1";
reply-type=original
Content-Transfer-Encoding: 7bit
Hi all,
I have a Top Node...
|
| 149 |
Forum: C / C++ IDE (CDT) «»
Posted on: Wed, 06 February 2008 11:01 «»
By: Patrick Schmitt
Enablements in own Plugin
Hello guys,
i am just upgrading my Fujitsu F16 Plugin to CDT 4.0.
Trying to work with Enablements doesnt have any effect and in the
documentation there is a lag about this issue :(
I want the boolean Option -g is per default only enablement if i use ...
|
| 150 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 30 January 2008 13:48 «»
By: Eclipse User
Re: [CDO] is it what I want ?
Originally posted by: stepper.sympedia.de
This is a multi-part message in MIME format.
--------------020408060102070908060401
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Thomas schrieb:
> I used t...
|
| 151 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 30 January 2008 13:48 «»
By: Eike Stepper
Re: [CDO] is it what I want ?
This is a multi-part message in MIME format.
--------------020408060102070908060401
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Thomas schrieb:
> I used the File New EMF Project wizard.
> Norma...
|
| 152 |
Forum: EMF «»
Posted on: Thu, 17 January 2008 14:46 «»
By: Eclipse User
Re: EMF Notification: Removing Model Elements...
Originally posted by: research.opencanarias.com
Hi Christian,
I have not analyzed in depth the Transactional notification mechanism.
It seems that is more powerful, but as far a as o i know, an editor
which is working on a resource, doesn't have to...
|
| 153 |
Forum: EMF «»
Posted on: Thu, 17 January 2008 13:39 «»
By: Eclipse User
Re: EMF Notification: Removing Model Elements...
Originally posted by: cdamus.ca.ibm.com
Hi, Adolfo,
One of your remarks jumped out at me (below).
It may be helpful to know that the Transaction API sends Notifications to
ResourceSetListeners in batches at the close of a transaction. So, such a
...
|
| 154 |
Forum: Remote Application Platform (RAP) «»
Posted on: Sun, 30 December 2007 14:08 «»
By: Christian
Re: Dialog problem
This is a multi-part message in MIME format.
--------------010401000007030908030804
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Benny,
i've syncronized rap plugins with CVS, but problem is not solved....
|
| 155 |
Forum: GEF «»
Posted on: Fri, 14 December 2007 15:45 «»
By: Eclipse User
[Zest] A couple of questions about graph connections in ZEST
Originally posted by: s0452900.sms.ed.ac.uk
This is a multi-part message in MIME format.
--------------030109040609040403090101
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hello all,
I was wondering...
|
| 156 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Mon, 10 December 2007 23:05 «»
By: Eclipse User
Re: Reordering attributes in a compartment
Originally posted by: jdente.21technologies.com
Hi again,
I managed to re-order the attributes inside of my compartment by creating
and executing two distinct transactions. First I copy all of my attributes
to a new list that I re-order with the cor...
|
| 157 |
Forum: Remote Application Platform (RAP) «»
Posted on: Wed, 05 December 2007 18:30 «»
By: Christian
Different behaviours on browsers
This is a multi-part message in MIME format.
--------------090007030203010806050104
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
attached there are two screenshots about a problems occurs launching...
|
| 158 |
Forum: UML2 Tools «»
Posted on: Thu, 08 November 2007 12:33 «»
By: Tatiana Fesenko
Re: [ClassD] remaining critical bugs
This is a multi-part message in MIME format.
----++Omea_Parts_Splitter.229449733732943
Content-Type: text/plain; charset=koi8-r
Content-Transfer-Encoding: quoted-printable
Hello=20Dave,
Thank=20you=20for=20the=20organic=20report=2e=20
#204733,...
|
| 159 |
Forum: UML2 Tools «»
Posted on: Thu, 08 November 2007 12:33 «»
By: Tatiana Fesenko
Re: [ClassD] remaining critical bugs
This is a multi-part message in MIME format.
----++Omea_Parts_Splitter.229449733732943
Content-Type: text/plain; charset=koi8-r
Content-Transfer-Encoding: quoted-printable
Hello=20Dave,
Thank=20you=20for=20the=20organic=20report=2e=20
#204733,...
|
| 160 |
Forum: ServerTools (WTP) «»
Posted on: Tue, 25 September 2007 19:31 «»
By: Larry Isaacs
Re: downloaded WTP complete non-SDK, have no J2EE perspective
Brian,
You were correct about the -vm parameter. I almost always specify this
parameter, and it should be the full path of java.exe or javaw.exe. You
might try temporarily adding "-debug" and "-clean" on separate lines
just a...
|
| 161 |
Forum: ServerTools (WTP) «»
Posted on: Tue, 25 September 2007 19:15 «»
By: Eclipse User
Re: downloaded WTP complete non-SDK, have no J2EE perspective
Originally posted by: Brian_Preston.firstdatabank.com
I tried this as well, still not working.
Is there something else I need to do to somehow enable the WTP features,
once the VM change has been made? I've gone into help->software
updates->M...
|
| 162 |
Forum: ServerTools (WTP) «»
Posted on: Tue, 25 September 2007 18:10 «»
By: Eclipse User
Re: downloaded WTP complete non-SDK, have no J2EE perspective
Originally posted by: kosta.bea.com
I believe that the path you need to specify for the -vm parameter is the
root dir of the jdk install, so you would want to write something like:
-vm C:\Sun\SDK\jdk
Regarding the versioning, a 1.6 VM should be fi...
|
| 163 |
Forum: Newcomers «»
Posted on: Mon, 17 September 2007 21:54 «»
By: Eclipse User
Re: Getting VE to run in Europa
Originally posted by: eclipse5.rizzoweb.com
Alan McLeod wrote:
> My Thanks to both Ed and Chris for their help!
>
> I had assumed that this release of Eclipse would be mature enough to run
> VE - I admit that I was careless! I may have ...
|
| 164 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 12 September 2007 16:57 «»
By: Eclipse User
[Announce] Servus Component Proposal
Originally posted by: ttonelli.uwaterloo.ca
This is a multi-part message in MIME format.
--------------030109050800030304070507
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dear all,
attached is a pr...
|
| 165 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 12 September 2007 16:57 «»
By: Thiago Tonelli Bartolomei
[Announce] Servus Component Proposal
This is a multi-part message in MIME format.
--------------030109050800030304070507
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dear all,
attached is a proposal to create a new Servus component as pa...
|
| 166 |
Forum: EMF «»
Posted on: Wed, 12 September 2007 16:57 «»
By: Thiago Tonelli Bartolomei
[Announce] Servus Component Proposal
This is a multi-part message in MIME format.
--------------030109050800030304070507
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Dear all,
attached is a proposal to create a new Servus component as pa...
|
| 167 |
Forum: Eclipse Platform «»
Posted on: Thu, 23 August 2007 23:19 «»
By: James Leone
Poor performance in Eclipse 3.3
I'm very happy to see the variety of new features that Europa brings with
it. Unfortunately, my experience has show a major performance degradation
between 3.2.2 and 3.3
I will go into more details below and hope you can point me in the correct
d...
|
| 168 |
Forum: Dali «»
Posted on: Fri, 17 August 2007 18:39 «»
By: Neil Hauge
Re: Many problems with Dali
Hi Mark,
Sorry to hear that you are running into some problems. I think most of
what you are experiencing (the 3 main errors) is related to Dali's
inability to always keep up with the quick changes in the UI (depending on
the speed of input for v...
|
| 169 |
Forum: Dali «»
Posted on: Fri, 17 August 2007 18:39 «»
By: Neil Hauge
Re: Many problems with Dali
Hi Mark,
Sorry to hear that you are running into some problems. I think most of
what you are experiencing (the 3 main errors) is related to Dali's
inability to always keep up with the quick changes in the UI (depending on
the speed of input for v...
|
| 170 |
Forum: Mylyn «»
Posted on: Thu, 19 July 2007 19:32 «»
By: Eclipse User
Re: Mylyn performance on network drives?
Originally posted by: beatmik.acm.org
Hi Kim,
As with other things that are kept in Eclipse's .metadata folder the
offline cache we expect fast I/O access to that cache (what Alex was
alluding to). But one of the key reasons that we broke the offl...
|
| 171 |
Forum: Mylyn «»
Posted on: Thu, 19 July 2007 19:32 «»
By: Mik Kersten
Re: Mylyn performance on network drives?
Hi Kim,
As with other things that are kept in Eclipse's .metadata folder the
offline cache we expect fast I/O access to that cache (what Alex was
alluding to). But one of the key reasons that we broke the offline
cache into separate files, instea...
|
| 172 |
Forum: Mylyn «»
Posted on: Wed, 18 July 2007 19:53 «»
By: Kim Sullivan
Mylyn performance on network drives?
I've been having performance problems using Mylyn with my workspace
placed on a network drive (I assume that those problems come from having
a remote workspace, I might be mistaken).
First, there was an issue with tooltips (I had them accidentally s...
|
| 173 |
Forum: Mylyn «»
Posted on: Wed, 18 July 2007 19:53 «»
By: Kim Sullivan
Mylyn performance on network drives?
I've been having performance problems using Mylyn with my workspace
placed on a network drive (I assume that those problems come from having
a remote workspace, I might be mistaken).
First, there was an issue with tooltips (I had them accidentally s...
|
| 174 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Mon, 25 June 2007 11:52 «»
By: Eclipse User
Re: Fixed label with an icon
Originally posted by: alexjaquet.gmail.com
This is a multi-part message in MIME format.
--------------000602040908050207030006
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi you simply need to add a ch...
|
| 175 |
Forum: Eclipse Platform «»
Posted on: Tue, 19 June 2007 17:35 «»
By: Paul Webster
Re: Handling editor input load failure
Depending on just how long the "lag" can be you have 2 choices (which
you've already outlined :-)
1) just try and get the content during the init(*). The downside is
that if it does take >1second eclipse will appear frozen unless you a...
|
| 176 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Wed, 13 June 2007 10:36 «»
By: Eclipse User
compartment problem (bis)
Originally posted by: alexjaquet.gmail.com
This is a multi-part message in MIME format.
--------------080404010509020905030406
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
With my following model (see m...
|
| 177 |
Forum: UML2 «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 178 |
Forum: UML2 «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 179 |
Forum: EMF «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 180 |
Forum: UML2 Tools «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 181 |
Forum: GMT (Generative Modeling Technologies) «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 182 |
Forum: UML2 Tools «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 183 |
Forum: GMT (Generative Modeling Technologies) «»
Posted on: Mon, 11 June 2007 09:54 «»
By: Stefan Kuhn
Connecting DSL-eCore w/ UML2
This is a multi-part message in MIME format.
--------------080404030005060101030601
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
hi folks,
the following text is quite long, so if you're in a rush jus...
|
| 184 |
Forum: Newcomers «»
Posted on: Sun, 03 June 2007 22:39 «»
By: Mark Dexter
Re: Eclipse is extremely slow
Zachary Turner wrote:
> Hi,
> I'm new to eclipse, I'm using it on Ubuntu Feisty Fawn with Kubuntu desktop
> manager. My CPU is a dual core AMD 64 bit, with 2GB of ram, so as far as I
> can tell there's no reason for anything to be sl...
|
| 185 |
Forum: Newcomers «»
Posted on: Sun, 03 June 2007 22:35 «»
By: Eclipse User
Re: Eclipse is extremely slow
Originally posted by: wharley.bea.com
"Zachary Turner" <nobody@nowhere.com> wrote in message
news:f3v75q$u90$1@build.eclipse.org...
> Hi,
>
> I'm new to eclipse, I'm using it on Ubuntu Feisty Fawn with Kubuntu
> ...
|
| 186 |
Forum: Newcomers «»
Posted on: Sun, 03 June 2007 20:09 «»
By: Jean-Christophe Deprez
Eclipse is extremely slow
Hi,
I'm new to eclipse, I'm using it on Ubuntu Feisty Fawn with Kubuntu desktop
manager. My CPU is a dual core AMD 64 bit, with 2GB of ram, so as far as I
can tell there's no reason for anything to be slow.
The editor often takes more than 1 sec...
|
| 187 |
Forum: ServerTools (WTP) «»
Posted on: Sat, 26 May 2007 08:55 «»
By: Eclipse User
Re: design mode for HTML editor in WTP
Originally posted by: jacek.pospychala.pl.ibm.com
This is a multi-part message in MIME format.
--------------050706080708010806080007
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hello,
I am wonderin...
|
| 188 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 19 April 2007 16:03 «»
By: Eclipse User
Re: gdb/gdbserver not responding with cygwin
Originally posted by: dschaefer.qnx.com
Charles Wilson wrote:
> [added cygwin to CC list; note cygwinners: original newgroup is members
> only, so replies will probably bounce. CDT folks, check
> http://news.gmane.org/gmane.os.cygwin or
&g...
|
| 189 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 19 April 2007 15:56 «»
By: Eclipse User
Re: gdb/gdbserver not responding with cygwin
Originally posted by: dschaefer.qnx.com
Charles Wilson wrote:
> [added cygwin to CC list; note cygwinners: original newgroup is members
> only, so replies will probably bounce. CDT folks, check
> http://news.gmane.org/gmane.os.cygwin or
&g...
|
| 190 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 19 April 2007 00:34 «»
By: Charles Wilson
Re: gdb/gdbserver not responding with cygwin
[added cygwin to CC list; note cygwinners: original newgroup is members
only, so replies will probably bounce. CDT folks, check
http://news.gmane.org/gmane.os.cygwin or
http://www.cygwin.com/ml/cygwin/2007-04/ ]
Doug Schaefer wrote:
> As with ...
|
| 191 |
Forum: Rich Client Platform (RCP) «»
Posted on: Wed, 18 April 2007 09:34 «»
By: Eclipse User
Re: line tracking
Originally posted by: peter_ossipov.mail.ru
This is a multi-part message in MIME format.
--------------000406080607080007030504
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HT...
|
| 192 |
Forum: Remote Application Platform (RAP) «»
Posted on: Sat, 10 March 2007 11:22 «»
By: Raul Arabaolaza
Re: Getting URL Paramter
This is a multi-part message in MIME format.
--------------010303020903080108090104
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi, i´ve been playing a little, with RAP demo and HttpService, this is
what g...
|
| 193 |
Forum: GMF (Graphical Modeling Framework) «»
Posted on: Mon, 26 February 2007 17:32 «»
By: Eclipse User
Notify view about model element deletion
Originally posted by: christian.bartels.gmx.de
This is a multi-part message in MIME format.
--------------020703080509000002040104
Content-Type: text/plain; charset=ISO-8859-15; format=flowed
Content-Transfer-Encoding: 7bit
Dear community,
I need...
|
| 194 |
Forum: Java Development Tools (JDT) «»
Posted on: Wed, 21 February 2007 11:47 «»
By: Eclipse User
Re: How can I add my own "new plug-in template"?
Originally posted by: merks.ca.ibm.com
This is a multi-part message in MIME format.
--------------080001010507020308060503
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Paul,
These are probably using ...
|
| 195 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 20 February 2007 22:23 «»
By: Paul E. Keyser
How can I add my own "new plug-in template"?
This is a multi-part message in MIME format.
--------------000801080506050905060702
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
R3.2.1, WinXP
I don't know the correct name for this feature, so it's har...
|
| 196 |
Forum: UML2 Tools «»
Posted on: Sun, 11 February 2007 22:04 «»
By: Ed Merks
Re: GMF files
This is a multi-part message in MIME format.
--------------090001000500030103030306
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Yves,
Look here in /cvsroot/modeling/org.eclipse.mdt/org.eclipse.uml2to...
|
| 197 |
Forum: UML2 Tools «»
Posted on: Sun, 11 February 2007 22:04 «»
By: Ed Merks
Re: GMF files
This is a multi-part message in MIME format.
--------------090001000500030103030306
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Yves,
Look here in /cvsroot/modeling/org.eclipse.mdt/org.eclipse.uml2to...
|
| 198 |
Forum: Nebula «»
Posted on: Fri, 02 February 2007 07:27 «»
By: Daniel Holmen
Re: PShelf Questions
I wouldn't be surprised if it has something to do with refresh/redraw
problems. I'm getting some weird focus ring behavior as well.
I'll have a look and do some proper debugging this weekend.
Regards,
Daniel
Chris Gross wrote:
> Thanks Da...
|
| 199 |
Forum: Nebula «»
Posted on: Fri, 02 February 2007 07:27 «»
By: Daniel Holmen
Re: PShelf Questions
I wouldn't be surprised if it has something to do with refresh/redraw
problems. I'm getting some weird focus ring behavior as well.
I'll have a look and do some proper debugging this weekend.
Regards,
Daniel
Chris Gross wrote:
> Thanks Da...
|
| 200 |
Forum: Nebula «»
Posted on: Fri, 02 February 2007 01:45 «»
By: Chris Gross
Re: PShelf Questions
Thanks Daniel. I would like to know why the widget is not animating.
The code should be very OS neutral. Do you have any insight on that?
Regards,
-Chris
Daniel Holmen wrote:
> Hi Chris
>
> I could help you out with some OSX testing...
|
Search
Help
Register
Login
Home