Details, datasheet, quote on part number: ADDC02812DA
| Part | ADDC02812DA |
| Category | Power Management => DC-DC Converters |
| Description | 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter |
| Company | Analog Devices |
| Datasheet | Download ADDC02812DA Datasheet |
| Quote |
| Features, Applications |
FEATURES V dc Input, 100 W Output V dc Input, 100 W Output (ADDC02815DA) Integral EMI Filter Designed to Meet MIL-STD-461D Low Weight: 80 Grams NAVMAT Derated Many Protection and System Features APPLICATIONS Commercial and Military Airborne Electronics Missile Electronics Space-Based Antennae and Vehicles Mobile/Portable Ground Equipment �SENSE +SENSE ADJUST STATUS �VOUT VAUX INHIBIT SYNC ISHARE TEMP �VIN +VIN INPUT SIDE CONTROL CIRCUIT FIXED FREQUENCY DUAL INTERLEAVED POWER TRAIN �VOUT OUTPUT FILTER VCOM +VOUT OUTPUT SIDE CONTROL CIRCUIT The ADDC02812DA and ADDC02815DA hybrid military dc/ dc converters with integral EMI filter offer the highest power density of any dc/dc power converters with their features and in their power range available today. The converters with integral EMI filter are a fixed frequency, 1 MHz, square wave switching dc/dc power supply. They are not variable frequency resonant converters. In addition to many protection features, these converters have system level features that allow them to be used as a component in larger systems as well as a stand-alone power supply. The units are designed for high reliability and high performance applications where saving space and/or weight are critical. The ADDC02812DA and ADDC02815DA are available in a hermetically sealed, molybdenum based hybrid package and are easily heatsink mountable. Three screening levels are available, including military SMD. 1. 60 W/cubic inch power density with an integral EMI filter designed to meet all applicable requirements in MIL-STD461D when installed in a typical system setup 2. Light weight: 80 grams 3. Operational and survivable over a wide range of input conditions: V�50 V dc; survives low line, high line, and positive and negative transients 4. High reliability; NAVMAT derated 5. Protection features include: Output Overvoltage Protection Output Short Circuit Current Protection Thermal Monitor/Shutdown Input Overvoltage Shutdown Input Transient Protection 6. System level features include: Current Sharing for Parallel Operation Inhibit Control Output Status Signal Synchronization for Multiple Units Input Referenced Auxiliary Voltage Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 � Analog Devices, Inc., 1997 Parameter INPUT CHARACTERISTICS Steady State Operating Input Voltage (12 V) Steady State Operating Input Voltage (15 V) Abnormal Operating Input Voltage Range (per (12 V) Abnormal Operating Input Voltage Range (per (15 V) Input Voltage Shutdown V) No Load Input Current V/15 V) Disabled Input Current V/15 V) OUTPUT 3, 4 Regulated Output Voltage (+12 V) Case Temp (TC = 25C, VIN V dc unless otherwise noted; full temperature range to +90C; all temperatures are case and TC is the temperature measured at the center of the package bottom.) Line Regulation (12 V) Line Regulation (15 V) Load Regulation (12 V) Load Regulation (15 V) Output Ripple/Noise (Regulated +12 V)5 (Cross Regulated �12 V)5 Output Ripple/Noise (Regulated +15 V)5 (Cross Regulated �15 V)5 Total Output Current (IO) 12 V Total Output Current (IO) 15 V Output Overvoltage Protection (12 V) Output Overvoltage Protection (15 V) Output Current Limit V/15 V) Output Short Circuit Current V/15 V) ISOLATION CHARACTERISTICS Isolation Voltage 4.17 A, VIN 4.17 A, VIN 4.17 A, VIN 3.34 A, VIN 3.34 A, VIN 3.34 A, VIN 4.17 A, VIN 4.17 A, VIN 4.17 A, VIN 3.34 A, VIN 3.34 A, VIN 3.34 A, VIN 4.17 A, VIN 3.34 A, VIN V dc VIN 28 V dc, +4.17 A VIN 28 V dc, A, 5 kHz � 2 MHz A, 5 kHz � 2 MHz 12 V dc, VIN 15 V dc, VIN 4.17 A, Open Remote Sense Connection 3.34 A, Open Remote Sense Connection = 90% VOUT Nom Parameter DYNAMIC CHARACTERISTICS Output Voltage Deviation Due to Step Change in Load (12 V) Output Voltage Deviation Due to Step Change in Load (15 V) Response Time Due to Step Change in Load (12 V) Test Level Conditions 2.08 A di/dt = 0.5 A/�s, Measured to Within 2% of Final Value 1.67 A, di/dt = 0.5 A/�s, Measured to Within 2% of Final Value 4.17 A, from Inhibit High to Status High 3.34 A, from Inhibit High to Status High 0.34 A Soft Start Turn-On Time (12 V) Soft Start Turn-On Time (15 V) THERMAL CHARACTERISTICS Efficiency (12 V) Hottest Junction (12 V) Hottest Junction (15 V) CONTROL CHARACTERISTICS Clock Frequency (12 V) Clock Frequency (15 V) Adjust (Pin 3) VADJ (12 V) Adjust (Pin 3) VADJ (15 V) Status (Pin 4) VOH VOL VAUX (Pin 5) VO (nom) (12 V) VAUX (Pin 5) VO (nom) (15 V) Inhibit (Pin 6) VIL IIL VI (Open Circuit) SYNC (Pin 7)8 VIH IIH ISHARE (Pin (12 V) ISHARE (Pin (15 V) Temp (Pin 9) IOH 400 �A IOL 1 mA IAUX = 5 mA, Load Current 4.17 A IAUX = 5 mA, Load Current 3.34 ANOTES 1 Military subgroups apply only to military qualified devices. V dc upper limit rated for transient condition to 50 ms. V dc lower limit rated for continuous operation during emergency condition. Steady state and abnormal input voltage range require source impedance sufficient to insure input stability at low line. See sections entitled System Instability Considerations and Input Voltage Range. 3 Measured at the remote sense points. 4 Output characteristics tested with balanced loads on each output; however, unit operates with unbalanced loads to 90%/10% split. 5 Regulated output typically performs with less ripple than cross regulated output. 100% test is performed with VD+ regulated and VD� cross regulated. 6 CLOAD 0. 7 Refer to section entitled Thermal Characteristics for more information. 8 Unit has internal pull-down; refer to section entitled Pin 7 (SYNC). Specifications subject to change without notice. |
| Related products with the same datasheet |
| ADDC02812DAKV |
| ADDC02812DATV |
| ADDC02815DA |
| ADDC02815DAKV |
| ADDC02815DATV |
| Some Part number from the same manufacture Analog Devices |
| ADDC02812DAKV 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter |
| ADDC02812DATV/QMLH 28 V/100 W DC/DC Converters With Integral Emi Filter |
| ADDC02815 |
| ADDC02815DA 28V/100W DC/DC Converter Vin=16-50V, Vo= 12V@8.3A W/emi Filter |
| ADDC02815DATV/QMLH 28 V/100 W DC/DC Converters With Integral Emi Filter |
| ADDC02828SA 28 V/100 W DC/DC Converter With Integral Emi Filter |
| ADDC02828SA28 V/100 W DC/DC Converter With Integral Emi Filter |
| ADDC02828SAKV 28 V/100 W DC/DC Converter With Integral Emi Filter |
| ADDC27005 |
| ADDC27008 |
| ADDC27012 |
| ADDC27015 |
| ADDS-2101-3V ADSP-2100 Family Development Tools |
| ADDS-2101-EZ-ICE |
| ADDS-2101-EZ-KIT |
| ADDS-2101-EZ-LAB |
| ADDS-210XX ADSP-21000 Family Development Tools |
| ADDS-210XX-TOOLS |
| ADDS-2111-EZ-ICE ADSP-2100 Family Development Tools |
| ADDS-2111-EZ-KIT |
| ADDS-2111-EZ-LAB |
|
ADV7196A : Multi-format Progressive Scan/ HDTV Encoder With Three 11-Bit DACs, 10-Bit Data Input And Macrovision AME8500BEFTBE28 : 3-Pin/5-Pin Micropower P Reset Family REF193GP : - ADM1177-1ARMZ-R7 : The ADM1177 is an integrated hot-swap controller which offers digital current and voltage monitoring via an on-chip 12-bit ADC, communicated through an I2C interface. An internal current sense amplifier senses voltage across the sense resistor in the power path via the VCC and SENSE pins. The AME8500AEFVDA21 : Uprocessor Supervisory AD8314ARMZ-REEL : 100 MHz to 2.7 GHz, 45 dB RF Detector/controller ADP3303ARZ-3.3-RL7 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 200MA 3.3V 8-SOIC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant ADM809ZARTZ-REEL7 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC SUPERVISOR MPU 2.32V SOT23 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: TO-236-3, SC-59, SOT-23-3 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 140 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2.32V ; Operating Temperature: AD7543GKR-REEL : SERIAL INPUT LOADING, 12-BIT DAC, PDSO16 Specifications: Package Type: SOIC, 0.300 INCH, 2 MM HEIGHT, SOIC-16 ; Screening Level: Industrial ; Pins: 16 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ADSP-21364SCSQZENG : 16-BIT, 55.55 MHz, OTHER DSP, PQFP144 Specifications: Data Bus: 40 ; Supply Voltage: 1.2V ; Package Type: LFQP, Other, LEAD FREE, MS-026BFB-HD, LQFP-144 ; Pin Count: 144 ; Clock Speed: 55.55 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; External Memory Interface: 16-Bit |
| Same catergory |
5962-9098701Q2A : Motion/Motor Control. ti UC1633, Phase Locked Frequency Controller. Precision Phase Locked Frequency Control System The UC1633 family of integrated circuits was designed for use in phase locked frequency control loops. While optimized for precision speed control of DC motors, these devices are universal enough for most apCrystal Oscillator plications that require phase locked control. A precise reference freProgrammable. ADR425ARM-REEL7 : Ultraprecision Low Noise, 2.048 V/2.500 v/ 3.00 V/5.00 V XFET Voltage References. GS3T5-5.2 : 3 W DC-DC Converter For Ecl. The a 3.12W DC-DC converter designed to provide an isolated 5.2V/600mA power source. The module operates from a 5V input source and continuous short-circuit protection. ELECTRICAL CHARACTERISTICS (Tamb.= 25� C unless otherwise specified) Symbol Vi Iir Vo Vor Vorn VOL VOO Io Iosc Vis fs Top Tstg Parameter Input Voltage Reflected Input Current Output. NCP1030DMR2 : Off-Line Regulators. Up-to-1MHz Switching Regulator With 200V / 0.5A Switch, 200V Maximum Startup And 2.5V Internal Reference, Package: Micro-8, Pins=8. REG103FA-A : ti REG103-A, Dmos 500mA Low Dropout (LDO) Regulator. q NEW DMOS TOPOLOGY: Ultra Low Dropout Voltage: 115mV Typ at 500mA and 3.3V Output Capacitor NOT Required for Stability q FAST TRANSIENT RESPONSE q VERY LOW NOISE: 33�Vrms q HIGH ACCURACY: �2% max q HIGH EFFICIENCY: IGND 1mA at IOUT = 500mA Not Enabled: IGND 3.3V, 5.0V, AND ADJUSTABLE OUTPUT VERSIONS q FOLDBACK CURRENT LIMIT q THERMAL PROTECTION q OUTPUT. UC2909DW : ti UC2909, Lead-acid Switchmode Charge Management ic With Differential Current Sense. UCC3952-3 : Battery Safety. Single Cell Lithium-ion Battery SaFETy Circuit W/internal Fet And Vov = 4.30v. ADP1715 : 500 mA Low-Dropout Linear Regulator in MSOP Package with 2 Versions The ADP1715/16 is a 500mA low-dropout linear regulator that uses an advanced, proprietary architecture to provide high power supply rejection ratio (PSRR) and excellent line and load transient response with just a small 2.2mF ceramic output capacitor. Supply current in shutdown mode. MAX16809 : The MAX16809/MAX16810 are integrated, high-efficiency white or RGB LED drivers. They are designed for LCD backlighting and other LED lighting applications with multiple strings of LEDs. The MAX16809/MAX16810's current-mode PWM controller regulates the necessary voltage to the LED array. Depending on the input voltage and LED voltage range, it can be used. LT4356MPS-1 : LT4356MP-1/LT4356MP-2 - Surge Stopper The LT4356 surge stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value thereby allowing the loads to continue functioning. The LT4356MP. MAX1946 : Single USB Switch With Autoreset And Fault Blanking In Tiny TDFN The MAX1946 single current-limited switch with auto-reset supplies a guaranteed 500mA load in accordance with USB s. The MAX1946 operates from a 2.7V to 5.5V input supply and consumes only 40�A of quiescent current when operating and only 3�A in shutdown. Selectable active-high/active-low. PT7M7342YTA : � � � � �P Supervisor Circuits The PT7M7xxx family microprocessor (�P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in �P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions.. PT7M7810Z : � � � � �P Supervisor Circuits The PT7M7xxx family microprocessor (�P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in �P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions.. ZXRD060 : 0.6V Reference Voltage Parts ZXRD060 The ZXRD060 is a 10-terminal dual adjustable shunt regulator offering excellent temperature stability and output handling capability. The ZXRD060 simplifies the design of isolated low voltage DC-DC regulators. With its low 0.6V FB pin, it can control the regulation of rails as low 0.6V. This makes it ideal for state. CL220N5-G : Simple, 220V, 20mA, Temperature-Compensated, Constant Current, LED Driver IC The Supertex CL220 is a high voltage, temperature- compensated, 20mA constant current regulator. The device operates at up to 220V, and is accurate to ±10% over a 5.0 - 160V range. The device can be used as a two terminal constant current source or constant current sink.. |