APHHS1005SURCK : Material: Ingaalp , Wavelength: 635nm

KB824 : Material: , Wavelength:

PDA54-11EWA : Material: GAASp/gap , Wavelength: 625nm

L-57GYW : T-1 3/4(5mm) Bi-polar AND Bi-color Indicator Lamps

WP7113VGC/Z : T-1 3/4 (5mm) Housing FOR LED LAMP

AA5060SYC-J : 5.0x6.0mm Surface Mount LED LAMP

DC04-11SYKWA : 7 SEG NUMERIC DISPLAY, GREEN, 10 mm Specifications: Display Type: Segmented ; Character Type: Numeric ; Common: Common Cathode ; LED Color: Green ; Character Height: 10 mm (0.3937 inch) ; Operating Temperature: -40 to 185 F (233 to 358 K)

DC43-11YWA : 7 SEG NUMERIC DISPLAY, HIGH EFFICIENCY RED, 11 mm Specifications: Display Type: Segmented ; Character Type: Numeric ; Common: Common Cathode ; LED Color: High Efficiency Red ; Character Height: 11 mm (0.4331 inch) ; Operating Temperature: -40 to 185 F (233 to 358 K)

KP-23QBC-C-F : SINGLE COLOR LED, BLUE, 3 mm Specifications: LED Type: Blue ; Peak Wavelength: 470 nm (4700 Å) ; Viewing Angle: 120 degrees ; Luminous Intensity: 0.0600 milliCandela ; Forward Current: 30 milliamps ; LED Package : 3 X 2.40 X 1.05 MM, SMD, 3 PIN

KPDC04-110 : 7 SEG NUMERIC DISPLAY, HIGH EFFICIENCY RED, 10.16 mm Specifications: Display Type: Segmented ; Character Type: Numeric ; Common: Common Cathode ; LED Color: High Efficiency Red ; Character Height: 10.16 mm (0.4000 inch) ; Operating Temperature: -40 to 185 F (233 to 358 K)

APBA02-41CGKWA : Material: Ingaaip , Wavelength: 570nm. The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. !I.C. COMPATIBLE !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. !PACKAGE:1000PCS/REEL Notes: 1. All dimensions are in millimeters (inches), Tolerance is �0.25(0.01")unless otherwise noted. 2. s are subject to change whitout notice. N o. Dic m A Min. APBA02-41CGKWA.

AT10GC : Receivers. 10 Gb/s Surface Mount Apd Preamplifier Receiver. 10 Gb/s High Sensitivity Coplanar APD Preamp Receiver The module consists of an APD photodetector, a low noise preamplifier, a connectorized single-mode fibre pigtail and a hermetic package with coplanar output. Optimized for use in 10 Gb/s Metro applications, either as a discrete device or within a transponder, using NRZ Modulation with or without.

HT12A : Remote Control. 212series of Encoders. Operating voltage - 2.4V~5V for the - 2.4V~12V for the HT12E Low power and high noise immunity CMOS Minimum transmission word - Four words for the HT12E - One word for the HT12A Built-in oscillator needs only 5% resistor Data code has positive polarity Minimal external components Pair with Holtek�s 212 series of decoders 18-pin DIP, 20-pin SOP package.

OL2013R : 13 Element SMD Phototransistor Array With Mounted Reticle. High speed phototransistor OL8110 chips Reference holes for precise mounting Compact size and low cost Custom design available Single chip placement for high speed applications Application Optical Encoders (absolut, incremental, multi turn) Edge detection for paper Multi Element Sensor Array Storage and Operating Temperature +85 �C Solder Temperature.

S6058 : Si-based Photodiodes.

SML-LXL1210IYC-TR : 1210 Surfee-LEDs, .12 X .10" PCB With Lens, Dual Chip.

SSH-LXH4670 : Two Piece Panel Bezel/clip.

SSL-LX50FT3USBD : T-5mm Flat Top, Flangeless.

T6B66A : Row Driver Lsi For Dot Matrix LCD.

W53IT : Material: GAASp/gap , Wavelength: 625nm. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is �0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without notice. Note:.

XDMR20A-B : Material (Color) = Gaalas (Red);; Lens = ;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= 8000;; Iv(ucd) If@10mA Typ.= 23990.

SSL-LX5063GT : Standard LED - Through Hole GREEN TRANSPARENT 565nm 100mcd. » » » LEDs - High Brightness - Leaded - Green LEDs - High Brightness - Leaded - Green Standard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: Lumex ; Product Category: Standard LED - Through Hole ; RoHS:  Details.

SSP-4SE102UP12G : LEDs - Lamp Replacements Green Clear 12V; LED .47" 4L E10 525NM PGRN WTR. s: Color: Green Clear ; Wavelength: 525nm ; Size / Dimension: Round - 0.472" (12mm) ; Millicandela Rating: 30500mcd ; Configuration: 4 Round ; Voltage - Forward (Vf) Typ: 12V ; Applications: Incandescent Replacements, Indicator Lights ; Can Replace Lamps: - ; Base Type: Miniature.

TA004-10003 : LED Thermal Products; LED HEATSINK W/FAN 12V 86X52.4MM. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

559-5901-003F : LED , Panel Indicators, Pilot Lights; LED PANEL DAYLT AMB SNAP-IN 6"LD. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LN252RP : LEDs -; LED RED DIFFUSED 4MM SQUARE. s: Color: Red ; Lens Style/Size: Square with Flat Top, 4mm ; Millicandela Rating: 0.6mcd ; Voltage - Forward (Vf) Typ: 2.2V ; Wavelength - Dominant: - ; Wavelength - Peak: 700nm ; Current - Test: 15mA ; Viewing Angle: - ; Lens Type: Diffused, Tinted ; Luminous Flux @ Current - Test: - ; Package / Case: Radial ; Mounting.

C11185_STRADA-DN-XR : Optics - LEDs, Lamps - Lenses Clear; LENS FOR CREE XR-E,C. s: Color: Clear ; For Use With/Related Products: Cree XR-E ; Lens Style/Size: Hourglass with Flat Top ; Viewing Angle: 104� x 66� ; Mounting Type: Adhesive, Screw ; Type: Lens with Integrated Mount ; Optical Pattern: Wide, Side Emitting ; Number of LEDs: 1 ; Lead Free Status: Lead Free ; RoHS.

NHD-0216MW-IB3 : DISPLAY OLED CHAR 2X16 BLUE. Organic light emitting diode (OLED) displays are an easy fit for any application with Newhaven Display’s 2 x 16, modular OLED product line. Choose between three electrical interfaces and five connector options for these character OLED displays. The modulated characteristics were designed with all kinds of engineers’.