P10IU-1205E : Power/w = 2 ;; Input/vdc = 5/12/24/48 ;; Output/vdc = 3,3/5/7,2/9/12/15/18/24 ;; ISOlation = 3000V ;; Package = SIP4

P10MU-0505Z : Power/w = 2 ;; Input/vdc =  5/12/24 ;; Output/vdc = +/-5/12/15 ;; ISOlation = 3000V ;; Package = DIP14

P6IU-1205E : Power/w = 1 ;; Input/vdc = 5/12/24 ;; Output/vdc = 3,3/5/7,2/12/15/18 ;; ISOlation = 3000V ;; Package = SIP4

P8SG-2415Z : Power/w = 1,5 ;; Input/vdc = 5/12/24 ;; Output/vdc = +/-3,6/5/7,2/12/15/18 Regulated ;; ISOlation = 1000V ;; Package = DIP24

PB47WG-1212Z21 : Power/w = 15 ;; Input/vdc = 9-18/18-36/36-72 ;; Output/vdc = +/- 5, 9, 12 And 15 ;; ISOlation = 1500 VDC ;; Package = 50.80x25.40

PB6FG-1212E21H30 : Power/w = 1 ;; Input/vdc = 9-18/ 18-36 ;; Output/vdc = 3,3/5/12/15/18Regulated ;; ISOlation = 3000 V ;; Package = DIP16

PD6NG-053R3Z21H30 : Power/w = 1 ;; Input/vdc = 4.5-9/9-18/18-36/36-72 ;; Output/vdc = +/- 3.3, 5, 9, 12, 15 And 24 ;; ISOlation = 3000 VDC ;; Package = Sip 8

PEN3-4812Z21 : Power/w = 2 - 3 ;; Input/vdc = 9-18/18-36/36-72 ;; Output/vdc = +/-5/12/15 ;; ISOlation = 1500V ;; Package = DIP24

PEN6-2412E41 : Power/w = 5 -6 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = 5/12/15 ;; ISOlation = 1500V ;; Package = DIP24

AN7724F : Low-dropout Three-pin Voltage Regulator 1.2-a Type. The AN7700, AN7700F, and AN7700SP series are stabilized constant-voltage power supplies with small difference between I/O voltages (0.5 V typ.). They are suitable for low-voltage, battery-driven equipment, and home appliances and industrial equipment with great fluctuation of the supply voltage. The output voltage ranges: For 20 V, and 24 V For 12 V, and V AN7700.

ICP-S0.5 : IC Protection. Circuit Protection Elements. !Circuit protection elements Rohm's circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short circuit loads. Whether operated or DC circuits, these circuit protectors have a very low internal resistance in normal operation, but safely and rapidly break the circuit when the current cutoff.

LCDP1521 : ASD for Telecom Wireline. Dual Line Programmable Transient Voltage Suppressor For Slic Protection.

MAX6301 : Watchdog. +5V, Low-Power, P Supervisory Circuits With Adjustable Reset/watchdog.

ST750A : Adjustable Step-down, Current-mode PWM DC-DC Converters. TO 450mA LOAD CURRENTS 200kHz HIGH-FREQUENCY CURRENT-MODE PWM TO 96% EFFICIENCIES OR 100�H PRE-SELECTED INDUCTOR VALUE, NO COMPONENT DESIGN REQUIRED 0.8mA QUIESCENT CURRENT 0.3�A SHUTDOWN SUPPLY CURRENT ADJUSTABLE OUTPUT VOLTAGE OVERCURRENT, SOFT-START AND UNDERVOLTAGE LOCKOUT PROTECTION CYCLE-BY-CYCLE CURRENT LIMITING PACKAGE AVAILABLE : DIP- 8 AND - 8 The is an adjustable.

TPIC0108B : PWM Control Intelligent H-bridge. Low Quiescent Supply Current 20 �A Optimized for Low-Power/Battery-Operated Applications Two Input Control Lines for Reduced Microcontroller Overhead Internal Current Shutdown 40 V Load Dump Rating Integrated Fault Protection and Diagnostics CMOS Compatible Schmitt Trigger Inputs for High Noise Immunity The is a PWM control intelligent H-bridge designed.

TPS7301QD : ti TPS7301, Lowest Dropout (LDO) PMOS Voltage Regulator With Integrated Supply Voltage Supervisor.

TPS76925QDBVRQ1 : ti TPS76925-Q1, Automotive Catalog Ultralow-power 100-mA Low-dropout Linear Regulators.

UC3835 : High Efficiency Regulator Controller. Complete Control for a High Current, Low Dropout, Linear Regulator Fixed 5V or Adjustable Output Voltage Accurate 2.5A Current Limiting with Foldback Internal Current Sense Resistor Remote Sense for Improved Load Regulation External Shutdown Under-Voltage Lockout and Reverse Voltage Protection Thermal Shutdown Protection 8 Pin Mini-Dip Package (Surface.

UCC1803 : Current Mode PWM Controllers. Low-power Bicmos Current-mode PWM. 100�A Typical Starting Supply Current 500�A Typical Operating Supply Current Operation to 1MHz Internal Soft Start Internal Fault Soft Start Internal Leading-Edge Blanking of the Current Sense Signal 1 Amp Totem-Pole Output 70ns Typical Response from Current-Sense to Gate Drive Output 1.5% Tolerance Voltage Reference Same Pinout as UC3842 and UC3842A.

NCP1282 : The NCP1282 is a voltage mode controller designed for ac-dc or dc-dc converters requiring high efficiency and low parts count. This controller incorporates two in phase outputs with an overlap delay to prevent simultaneous conduction and facilitates soft switching. The main output is designed for driving a forward converter primary MOSFET. The secondary.

LTC3406A : 1.5MHz, 600mA Synchronous Step-Down Regulator in ThinSOT The LTC�3406A is a high effi ciency monolithic synchronous buck regulator using a constant frequency, current mode architecture. Supply current during operation is only 20μA, dropping to ≤1μA in shutdown. The 2.5V to 5.5V input voltage range makes the LTC3406A ideally suited for single.

ISL8560 : DC/DC Power Switching Regulator The ISL8560 is a step down DC/DC power switching regulator which accepts 9.0V to 60V input and provides a 2A output current. The output voltage can be set in the range between 1.21V and 55V by means of an external divider. The device uses an internal power DMOS transistor with a typical rDS(ON) of 0.19Ω to obtain.

TPS79921 : Single Output LDO, 200mA, Fixed (2.1V), Low Quiescent Current, Low Noise, High PSRR The TPS799xx family of low-dropout (LDO) low-power linear regulators offer excellent AC performance with very low ground current. High power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient response are provided while consuming.

L9822E : Low Side Switches Octal serial solenoid driver. Eight low RDSon DMOS outputs 25 �C VCC bit serial input data (SPI) 8 bit serial diagnostic output for overload and open circuit conditions Output short circuit protection Chip enable select function (active low) Internal 36 V clamping for each output Cascadable with another octal driver Low quiescent current (10 mA Max.) Multipower BCD technology Package.

DRV8432 : Dual Full Bridge PWM Motor Driver The DRV8412/22/32 are high performance, integrated dual full bridge motor drivers with an advanced protection system. Because of the low RDS(on) of the H-Bridge MOSFETs and intelligent gate drive design, the efficiency of these motor drivers can be up to 97%, which enables the use of smaller power supplies and heatsinks,.