ILA7052N :

IN74AC175N : Quad D-type Flip-flop 16

IN74AC34N : Hex Non-inverter 14

IN74ACT157N : Quad 2-1 Data Selector/multiplexer 16

IN74ACT193N : 4-Bit Synchronous Binary Up/down Counter 16

IW4043BN : Quad Nor R-s Latch(3-State)16

IW4060BD : 14-Bit Binary Devide/Counter16

IW4071BD : Quad 2-Input OR GATE14

IW4503BN : Hex Buffer16

IL44608N75 : External Components Reliable and Flexible SMPS Controller The IL44608N is a high performance voltage mode controller designed for off�line converters. This high voltage circuit that integrates the start�up current source and the oscillator capacitor, requires few external components while offering

BA3528AFP : . Pre / power amplifier and motor governor for 3V headphone stereos The BA3528AFP and AB3529AFP have been developed for headphone stereos. They run off a 3V power supply, and include dual pre- and power amplifiers, and a motor governor. The preamplifiers are direct-coupled, and the power amplifiers use a fixed-gain NF circuit. An on-chip VREF amplifier.

BA3575FS : . The is a headphone driver with an AVC circuit that keeps the output below a fixed level. It low current consumption, and low output noise, and is ideal for use in portable digital audio equipment. F 1) Low current consumption (when VCC 2.4 V, the quiescent current 4.9mA). 2) Suitable for use in digital audio equipment (voltage gain: = 11.8dB, output.

CR7929 : Triple Video Driver Hybrid Amplifier. Transition times to 90%) with 45 V (p-p) swing and = 10 pF: � rise time (typ.) ns � fall time (typ.) 1.9 ns Small 11-pin package Design optimized for excellent smearing performance Gold metallization for highest reliability. APPLICATIONS Top-end colour cathode-ray tube (CRT) monitors with pixel frequencies to 300 MHz. PINNING PIN input 1 ground output.

CXA1561M/S : Noise Reduction. The CXA1560 series is a bipolar IC incorporating stereo Dolby B-C type noise reduction (NR) system. Five kinds of device are provided due to the combination of three line output levels and two packages for various applications. A reduction in the number of external parts and small package have been achieved due to the fact that the spectral skewing.

LM2889 : TV Video Modulator (discontinued). The LM2889 is designed to interface audio and video signals to the antenna terminals a TV receiver It consists of a sound subcarrier oscillator and FM modulator video clamp and RF oscillators and modulators for two low-VHF channels The LM2889 allows video information from VTRs video disk systems games test equipment or similar sources to be displayed.

M52042FP : NTSC. NTSC Video Chroma Signal Processor.

MAX526CCNG : Galibrated Quad 12-bit Voltage-output D/A Converters.

MM1389 : Pedestal Clamp 2-Input 1-Output 3-Circuit Video Switch. This is a video switch IC developed for use in video cameras, with 2-input and 1-output circuits. It has pedestal clamp input, making it ideal for RGB and video signal switching, Pedestal clamp input Low current consumption Frequency response Operating power supply voltage typ.(VCC5V) 10MHz typ. 0dB 4.5~12V Applications Pin no. Pin name IN2b IN1a Function.

S1A0901X01 : = S1A0901X01 am / FM Tuner + MPX ;; Function = AM/FM Radio Chip ;; = One Chip Tuner With Built-in FM Multiplex,no Adjustment For FM Detector And Vco,wide Operating Voltage Range: VCC = 1.8V - 7V ;; Package = 24SDIP,24SOP ;; Production Status = Eol.

TDA1521A : TDA1521A; 2 X 6 W Hi-fi Audio Power Amplifier;; Package: SOT110-1 (SIL9MPF).

TDA7411 : Advanced Car Signal Processor. FULLY INTEGRATED SIGNAL PROCESSOR OPTIMIZED FOR CAR RADIO APPLICATIONS FULY PROGRAMMABLE BY I2C BUS INCLUDES AUDIOPROCESSOR, STEREODECODER WITH NOISE BLAMKER AND MULTIPATH DETECTOR SOFTMUTE FUNCTION PROGRAMMABLE ROLL-OFF COMPENSATION NO EXTERNAL COMPONENTS The TDA7411 is the successor of the TDA7407 in the CSP family introduced by the TDA7460/61. It uses.

TDA7522 : Digital Servo & Decoder. BUILT IN 8Bit MICROCONTROLLER (STANDARD ST7) with: � 24 KByte ROM available for ST7 & Servo-Audio DSP � 1024Byte RAM, including 128byte stack � 4KByte RAM for CD-Text memory (for 1block) � Built in R-W subcode buffer (Max. 144Byte 8packs) for CD-Text � 24 bit general I/O port PortC[7-0]) � One External Interrupt (16 IRQ encoder inside) � 16bit free.

XRD9812 : Image Processor/Correction. 3-Channel 10/12-Bit Linear CCD & Cis Sensor Signal Processors.

CS42435 : 108 dB, 192 kHz 4-in, 8-out Surround-Sound CODEC TDM only Resolution (bits) Dynamic Range (dB) THD+N (dB) Sample Rate (kHz) Analog I/O Power Supply (V) Type Package 24 105 / 108 DACs; 102 / 105 ADCs -95 / -98 DACs; -95 / -98 ADCs 192 Single-ended or Differential DACs and ADCs VA = 3.3 or 5; VD = 3.3; VL = 1.8 to 5 Multi-Channel 52 MQFP.

TAS5614 : 150W Stereo / 300W Mono PurePath(TM) HD Digital-input Power Stage The TAS5614 is a high performance analog input Class D amplifier with integrated closed loop feedback technology (known as PurePath� HD) with the ability to drive up to 150W(1) Stereo into 4 to 8 Speakers from a single 36V supply. PurePath� HD technology enables traditional AB-Amplifier.

NAU8501 : Audio Data Converters The NAU8501 is a low power, high quality stereo CODEC designed for portable and general purpose applications. In addition to precision 24-bits stereo ADCs, this device integrates many additional functions to simplify implementation of full audio systems with very low parts count. The NAU8501 includes a low-noise differential stereo.