I/O compatible with integrated circuits Industry standard DIP package Isolation test voltage: 5300 VRMS Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

The is a bi-directional input optically coupled isolator consisting of two inverse parallel gallium arsenide infrared LEDs coupled to a silicon NPN phototransistor a 6 pin DIP package. The H11AA1 has a minimum CTR 20 a CTR symmetry of 1:3 and is designed for applications requiring detection or monitoring of AC signals.

UL1577, file no. E52744 system code or J, double protection CSA 93751 BSI IEC 60950; IEC 60065 DIN EN 60747-5-5 available with option 1 FIMKO

PART H11AA1-X007 H11AA1-X009 Note For additional information on the available options refer to option information. REMARKS CTR 20 DIP-6 CTR DIP-6 400 mil (option 6) CTR 20 SMD-6 (option 7) CTR 20 SMD-6 (option 9)

PARAMETER INPUT Forward continuous current Power dissipation Derate linearly from 25 �C OUTPUT Power dissipation Derate linearly from 25 �C Collector emitter breakdown voltage Emitter base breakdown voltage Collector base breakdown voltage BVCEO BVEBO BVCBO Pdiss mW mW/�C V IF Pdiss mA mW mW/�C TEST CONDITION SYMBOL VALUE UNIT

PARAMETER COUPLER Isolation test voltage (RMS) Creepage distance Clearance distance Comparative tracking index Isolation resistance Storage temperature range Operating temperature range Lead soldering time 260 �C per DIN IEC 112/VDE 0303, part 1 VIO 500 V, Tamb 25 �C VIO 500 V, Tamb 100 �C CTI RIO Tstg Tamb Tsld between emitter and detector, referred to standard climate 23 �C/50% RH, DIN 50014 VISO �C s VRMS mm TEST CONDITION SYMBOL VALUE UNIT

Note Tamb = 25 �C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability.

PARAMETER INPUT Forward voltage OUTPUT Collector emitter breakdown voltage Emitter base breakdown voltage Collector base breakdown voltage Collector emitter leakage current COUPLER Collector emitter saturation voltage = 10 mA, 0.5 mA VCEsat 100 �A VCE 10 V BVCEO BVEBO BVCBO ICEO 1.5 V TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Note Tamb = 25 �C, unless otherwise specified. Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.

PARAMETER DC current transfer ratio Symmetry (CTR + 10 mA)/(CTR - 10 mA) TEST CONDITION = 10 mA, VCE 10 V SYMBOL CTRDC MIN. TYP. MAX. UNIT %

Fig. 3 - Normalized Non-Saturated and Saturated CTR vs. LED Current Document Number: 83608 Rev. 1.6, 08-May-08