Network Surge Suppressor Essential protection for data communication lines (D10B2) | Eaton

Eaton
10000 Woodward Avenue
Woodridge, Illinois 60517
+1 773-869-1776
+1 (773) 869-1329
cpdipresaleshelp@eaton.com
United States
Contact Us
Product Status Discontinued on 5/12/2011

Overview

Tripp Lite's D10B2 offers data line surge suppression for 10Base-2 (thin coax) ethernet network interface cards, bridges and routers, plus IBM 3270 and CCTV lines. Includes BNC coax male to female connections allow convenient placement at the protected device network connection. Surge suppression is handled with balanced arrays of high-speed avalanche diodes that divert excess energies created by electrostatic discharges away from network interface connections. Tripp Lite network surge suppressors reduce blown NIC cards, garbled network transmissions, system lock-ups and hard equipment failure by safely shunting dataline surges to ground. Six-inch heavy-gauge grounding lead connects to designated grounding lugs available on the back panel of most network workstations and pieces of internetworking equipment. Lifetime warranty.

SUPPRESSION: 1 set BNC Coax (male/female), protects center, shield & chassis, 7.5V clamping.

Features

  • D10B2 offers data line surge suppression for 10Base-2 (thin coax) ethernet connections
  • Protects network interface cards, bridges and routers, plus IBM 3270 and CCTV lines
  • BNC coax male to female connections connect to existing 10Base-2 wiring
  • Surge suppression utilizing high speed avalanche diodes divert excess energies on the network to ground
  • 6 inch heavy gauge grounding lead connects to designated grounding lugs on protected equipment
  • Lifetime product warranty

Specifications

OVERVIEW
UPC Code037332010766
INPUT
Recommended Electrical Service120V
Input Plug TypeBNC
Input Cord Length (ft.)0
Right-Angle PlugNo
OUTPUT
Output ReceptaclesHardwire
Circuit Breaker (amps)750
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating  0
DATALINE SURGE SUPPRESSION
Cable (Coax) ProtectionYes
Cable (Coax) Protection Details1 line
Network (Ethernet) ProtectionNo
Additional Dataline ProtectionCenter, Shield & Chassis
PHYSICAL
Mounting Holes or SlotsNo
Shipping Dimensions (hwd / in.)9.20 x 4.25 x 10.20
Shipping Weight (lbs.)0.30
Unit Dimensions (hwd / in.)0.000 x 0.000 x 3.380
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)Lifetime limited warranty

Questions & Answers

A surge protector will protect your electronics by acting as an “electrical sponge” by clamping down on spikes, “soaking them up” and converting the excess energy into heat, thus preventing the spikes from passing through the surge protector into the sensitive electronic devices and damaging them. As with any “sponge” a surge protector has a limited absorption capacity. Once that capacity is reached, the unit is no longer able to protect and must be replaced.
Was this information helpful? Yes No
Need more help? Contact Technical Support
Ask a Question

More Q&As may be available on the D10B2 model support page.

Documents & Downloads

Useful Web Pages

Product Images

support icon

Do you own a
D10B2

Get support for your product all in one place!

go to model support

Need help with your purchase?
We're always available to help with questions, including product selection, sizing, installation and product customization. Call us at +1 773-869-1776 or email cpdipresaleshelp@eaton.com.