This site displays a prototype of a “Web 2.0” version of the daily Federal Register. It is not an official legal edition of the Federal Register, and does not replace the official print version or the official electronic version on GPO’s govinfo.gov.
The documents posted on this site are XML renditions of published Federal Register documents. Each document posted on the site includes a link to the corresponding official PDF file on govinfo.gov. This prototype edition of the daily Federal Register on FederalRegister.gov will remain an unofficial informational resource until the Administrative Committee of the Federal Register (ACFR) issues a regulation granting it official legal status. For complete information about, and access to, our official publications and services, go to About the Federal Register on NARA's archives.gov.
The OFR/GPO partnership is committed to presenting accurate and reliable regulatory information on FederalRegister.gov with the objective of establishing the XML-based Federal Register as an ACFR-sanctioned publication in the future. While every effort has been made to ensure that the material on FederalRegister.gov is accurately displayed, consistent with the official SGML-based PDF version on govinfo.gov, those relying on it for legal research should verify their results against an official edition of the Federal Register. Until the ACFR grants it official status, the XML rendition of the daily Federal Register on FederalRegister.gov does not provide legal notice to the public or judicial notice to the courts.
A Proposed Rule by the Federal Aviation Administration on 02/03/2012
Information about this document as published in the Federal Register.
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
This table of contents is a navigational tool, processed from the headings within the legal text of Federal Register documents. This repetition of headings to form internal navigation links has no substantive legal effect.
These tools are designed to help you understand the official document better and aid in comparing the online edition to the print edition.
These markup elements allow the user to see how the document follows the Document Drafting Handbook that agencies use to create their documents. These can be useful for better understanding how a document is structured but are not part of the published document itself.
Display Non-Printed Markup ElementsMore information and documentation can be found in our developer tools pages.
This PDF is the current document as it appeared on Public Inspection on 02/02/2012 at 8:45 am.
If you are using public inspection listings for legal research, you should verify the contents of the documents against a final, official edition of the Federal Register. Only official editions of the Federal Register provide legal notice of publication to the public and judicial notice to the courts under 44 U.S.C. 1503 & 1507. Learn more here.
This document has been published in the Federal Register. Use the PDF linked in the document sidebar for the official electronic format.
Federal Aviation Administration (FAA), DOT.
Notice of proposed rulemaking (NPRM).
We propose to adopt a new airworthiness directive (AD) for the Aeronautical Accessories Inc. (AAI) High Landing Gear Aft Crosstube Assembly (aft crosstube) installed on certain Bell Helicopter Textron, Inc. (Bell) and Agusta S.p.A. (Agusta) model helicopters as an approved Bell part installed during production or based on a Supplemental Type Certificate (STC). This proposed AD is prompted by three reports of failed crosstubes because of cracks. The proposed actions are intended to prevent failure of a crosstube, collapse of the landing gear, and subsequent loss of control of the helicopter.
We must receive comments on this proposed AD by April 3, 2012.
You may send comments by any of the following methods:
• Federal eRulemaking Docket: Go to http://www.regulations.gov. Follow the online instructions for sending your comments electronically.
• Fax: (202) 493–2251.
• Mail: Send comments to the U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590–0001.
• Hand Delivery: Deliver to the “Mail” address between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
You may examine the AD docket on the Internet at http://www.regulations.gov or in person at the Docket Operations Office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the economic evaluation, any comments received, and other information. The street address for the Docket Operations Office (telephone (800) 647–5527) is in the ADDRESSES section. Comments will Start Printed Page 5421 be available in the AD docket shortly after receipt.
For service information identified in this proposed AD, contact Aeronautical Accessories, Inc., P.O. Box 3689, Bristol, Tennessee 37625–3689, telephone (423) 538–5151 or 1–800–251–7094, fax (423) 538–8469 or at http://www.aero-access.com. You may also get service information from Bell Helicopter Textron, Inc., P.O. Box 482, Fort Worth, TX 76101, telephone (817) 280–3391, fax (817) 280–6466, or at http://www.bellcustomer.com/files. You may review copies of the referenced service information at the FAA, Office of the Regional Counsel, Southwest Region, 2601 Meacham Blvd., Room 663, Fort Worth, TX 76137.
Start Further InfoMartin R. Crane, Aviation Safety Engineer, Rotorcraft Directorate, Rotorcraft Certification Office, 2601 Meacham Blvd., Fort Worth, TX 76137, telephone (817) 222–5170, email martin.r.crane@faa.gov.
End Further Info End Preamble Start Supplemental InformationWe invite you to participate in this rulemaking by submitting written comments, data, or views. We also invite comments relating to the economic, environmental, energy, or federalism impacts that might result from adopting the proposals in this document. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are filed electronically, commenters should submit only one time.
We will file in the docket all comments that we receive, as well as a report summarizing each substantive public contact with FAA personnel concerning this proposed rulemaking. Before acting on this proposal, we will consider all comments we receive on or before the closing date for comments. We will consider comments filed after the comment period has closed if it is possible to do so without incurring expense or delay. We may change this proposal in light of the comments we receive.
This document proposes adopting a new AD for AAI aft crosstubes installed during production or based on STC SR01502AT on certain Bell and Agusta model helicopters. This proposal would require certain recurring visual, dimensional, and fluorescent penetrant inspections of each aft crosstube. If there is a crack, the AD would require, before further flight, replacing any cracked aft crosstube with an airworthy aft crosstube. This proposal would also require establishing a life limit for one of the affected part-numbered aft crosstubes (as the later part-numbered aft crosstube already has limits established) and creating a component history card or equivalent record for aft crosstube part number (P/N) 412–321–304. This proposal is prompted by three reports of failed aft crosstubes. This condition, if not corrected, could result in collapse of the landing gear, and subsequent loss of control of the helicopter.
We are proposing this AD because we evaluated all known relevant information and determined that an unsafe condition exists and is likely to exist or develop on other products of the same type design.
We have reviewed AAI Alert Service Bulletin No. AA–07109, dated April 3, 2008 (ASB), which specifies recurring inspections and maintenance of each aft crosstube, P/N 412–321–104, installed as an approved part by Bell during production, and P/N 412–321–304, installed under STC SR01052AT, on Bell Model 412, 412EP, and 412CF and Agusta Model AB412 and AB412EP helicopters. The ASB specifies establishing a high aft crosstube, P/N 412 321–304, “takeoff/landing” life limit of 20,000. Also, the ASB specifies that operators should follow helicopter towing instructions to prevent crosstube damage or failure as a result of ground handling or towing.
We have also reviewed Bell ASB 412–08–129, dated May 12, 2008, for Bell Model 412 and 412EP helicopters, serial numbers 33001 through 33213, 36001 and subsequent, with an aft crosstube P/N 412–321–104 installed. Bell issued its ASB “to achieve complete distribution of AA–07109 vendor bulletin to the current affected model distribution list.”
This proposed AD would require:
This proposed AD would revise the Airworthiness Limitations section of the applicable maintenance manuals or the Instructions for Continued Airworthiness (ICA) by establishing a new retirement life of 20,000 takeoffs and landings for aft crosstube P/N 412–321–304 by making pen and ink changes or inserting a copy of the AD into the maintenance manual or the ICAs.
We estimate that this proposed AD would affect 115 helicopters of U.S. Registry.
We also estimate that the proposed actions would take about:
• 1/2 hour to do the repetitive visual inspections, assuming 14 repetitive visual inspections per year;
The average labor rate is $85 per work hour. Required parts would cost about $9,315 per aft crosstube. Based on these Start Printed Page 5422 figures, we estimate the total cost impact of the proposed AD on U.S. operators to be $636,545.
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed, I certify this proposed regulation:
1. Is not a “significant regulatory action” under Executive Order 12866;
2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska to the extent that it justifies making a regulatory distinction; and
4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
We prepared an economic evaluation of the estimated costs to comply with this proposed AD and placed it in the AD docket.
Start List of SubjectsAccordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
Start Part1. The authority citation for part 39 continues to read as follows:
Start AuthorityAuthority: 49 U.S.C. 106(g), 40113, 44701.
End Authority2. The FAA amends § 39.13 by adding the following new AD:
Aeronautical Accessories, Inc.: Docket No. FAA–2012–0083; Directorate Identifier 2010–SW–022–AD.
This AD applies to High Landing Gear Aft Crosstube Assembly (aft crosstube) part number (P/N) 412–321–104 and P/N 412–321–304, installed on Agusta S.p.A. Model AB412 and AB412EP and Bell Helicopter Textron, Inc., Model 412, 412CF, and 412EP helicopters, certificated in any category.
This AD defines the unsafe condition as a cracked aft crosstube which could result in collapse of the landing gear, and subsequent loss of control of the helicopter.
You are responsible for performing each action required by this AD within the specified compliance time unless it has already been accomplished prior to that time.
(1) Within 50 hours time-in-service (TIS) establish a life limit of 20,000 takeoffs and landings for each aft crosstube P/N 412–321–304. For the purposes of this AD, a takeoff and landing is defined as the cycle from when the helicopter gets light on the skids (takeoff) unloading the aft crosstube and then settles on the skids again (landing) reloading the aft crosstubes. Either the number of landings or takeoffs may be counted.
(i) Create a component history card or equivalent record.
(ii) Determine and record on the history card or equivalent record the total number of takeoffs and landings for each aft crosstube. If the takeoff and landing information is unavailable, estimate the number by multiplying the airframe hours by 10.
(2) Within the next 450 takeoffs and landings, if an aft crosstube has reached 20,000 or more takeoffs and landings, replace it with an airworthy aft crosstube.
(3) Before reaching 2,500 takeoffs and landings or for an aft crosstube with 2,500 or more takeoffs and landings, within 50 hours TIS or within the next 250 takeoffs and landings, whichever occurs first, prepare the aft crosstube inspection areas as depicted in Figure 1 of Aeronautical Accessories, Inc. (AAI) Alert Service Bulletin No. AA–07109, dated April 3, 2008 (ASB), by following the Accomplishment Instructions, Part B, paragraphs 1 through 4, of the ASB. Using a 10X or higher magnifying glass, inspect the prepared areas of each aft crosstube for a crack. If there is a crack, before further flight, replace the cracked aft crosstube with an airworthy aft crosstube. If there are no cracks, after completing the aft crosstube inspection, prime and paint the inspection area by following the Accomplishment Instructions, Part B, paragraphs 6 and 7, of the ASB.
(4) Thereafter, at intervals not to exceed 450 takeoffs and landings, clean the inspection area. Using a 10X or higher magnifying glass, inspect the clear-coated area of the aft crosstube for a crack.
(5) If there is a crack, before further flight, replace the cracked aft crosstube with an airworthy aft crosstube.
(6) Within 30 days or before reaching 2,500 takeoffs and landings, whichever occurs later, and thereafter at intervals not to exceed 2,500 takeoffs and landings or 12 months, whichever occurs first, determine the horizontal deflection of each aft crosstube from the centerline of the helicopter (BL 0.0) to the outside of the skid tubes by following the Accomplishment Instructions, Part D, paragraphs 1 through 3, of the ASB. If the measured aft crosstube horizontal deflection depicted in Figure 2 of the ASB is less than 57 inches (1448 mm) or greater than 59 inches (1499 mm), replace the aft crosstube with an airworthy aft crosstube.
(7) Within 3 months or on or before reaching 7,500 takeoffs and landings, whichever occurs later, and thereafter at intervals not to exceed 5,000 takeoffs and landings:
(i) Remove the aft crosstube assembly by removing the aft crosstube support beam assembly, P/N 604–030–001, and both aft crosstube clamp assemblies, P/N 604–027–002.
(ii) Remove paint and sealant from the aft crosstube outboard of the upper center support to top of saddles, both sides, as depicted in Figure 3 of the ASB.
(iii) Fluorescent penetrant inspect each aft crosstube outboard of the upper center support as depicted in Figure 3 of the ASB for a crack.
(iv) If there is a crack, before further flight, replace the cracked aft crosstube with an airworthy aft crosstube.
(8) Revise the helicopter Airworthiness Limitations section of the applicable maintenance manuals or the Instructions for Continued Airworthiness (ICA) by establishing a new retirement life of 20,000 takeoff and landings for aft crosstube P/N 412–321–304 by making pen and ink changes or inserting a copy of this AD into the maintenance manual or the ICAs.
(1) The Manager, Rotorcraft Certification Office, FAA, may approve AMOCs for this AD. Send your proposal to: Martin R. Crane, Aviation Safety Engineer, Rotorcraft Directorate, Rotorcraft Certification Office, 2601 Meacham Blvd., Fort Worth, Texas 76137, telephone (817) 222–5170, email martin.r.crane@faa.gov.
(2) For operations conducted under a Part 119 operating certificate or under Part 91, Subpart K, we suggest that you notify your principal inspector, or lacking a principal inspector, the manager of the local flight standards district office or certificate holding district office before operating any aircraft complying with this AD through an AMOC. Start Printed Page 5423
The FAA approved AAI Instructions for Continued Airworthiness Report Number AA–01136 and the Bell Helicopter Textron Alert Service Bulletin No. 412–08–129, dated May 12, 2008, which are not incorporated by reference, contain additional information about inspecting the aft crosstube for a crack.
Joint Aircraft Service Component (JASC) Code: 32: Landing Gear.
Issued in Fort Worth, Texas, on January 23, 2012.
Kim Smith,
Manager, Rotorcraft Directorate, Aircraft Certification Service.
[FR Doc. 2012–2423 Filed 2–2–12; 8:45 am]
BILLING CODE 4910–13–P