Adobeair ED213 Parts Breakdown List
Manufacturer: Adobeair
Model #: ED213 A-D
Replaced by: PMI D2231
Industry Standard CFM: 21000
Delivered CFM Range: 9000-18000*
Outlet: Downdraft
Cabinet Dimensions: 62”w X 62”d X 61-1/4”h
Outlet Dimension: 31-3/4" X 31-3/4"
Pad Size: 28" x 56"(2 on each side), or 28" x 28" (4 on each side)
Shipping Weight: 625 lbs
Operating Weight: 1240 lbs*Range depends on motor & sheave selection and ductwork static pressure.
| Fig. # | Description | Replacement Part # |
|---|---|---|
| 1 | Top Panel | Unavailable |
| 2 | Cabinet Bottom | Unavailable |
| 3 | Corner Leg | Unavailable |
| 4 | Center Leg | Unavailable |
| 5 | Pad Latch Assembly | 47925 |
| 7 | Pad Frame Assembly | 5-2-28A |
| 8 | Pad Retainer Wire (4 per original frame needed | 7973 |
| 9 | Pad Media - Aspen (2 for each side) | AP2856 |
| 10 | Water Distributor Assembly | 5-6-14 |
| 11 | Distributor Metering Tips | 4662 |
| 12 | Motor Base Assembly | 5-3-120 |
| 13 | Bearing Support Bar | Unavailable |
| 14 | Ball Bearing Assembly 1-3/16" | A904601A |
| 15 | Pulley 18" Double Groove A | 5-3-63 |
| 16 | Shaft 1-3/16" x 38" | 5-3-6 |
| 17 | Blower Wheel 28x28x1-3/16 | 5-3-161 |
| 18 (Not shown) | Water Pump - 120 Volt | 1400 |
| 19 (Not shown) | Water Pump - 240 Volt | 1402 |
| 20 (Not shown) | Float Valve | 4164 |
| 21 | Center Pad Latch | Unavailable |
| 22 | Support Bracket | Unavailable |
| 23a (Not shown) | Motor - 1 HP 115/230 1PH, 5/8" Shaft 56FR | M165 |
| 23b (Not shown) | Motor – 1 HP 208-230/460 3PH, 7/8" Shaft 56FR | M166C |
| 23c (Not shown) | Motor - 1.5 HP 115/230 1PH, 7/8" Shaft 145T | M169A |
| 23d (Not shown) | Motor - 1.5 HP 208-230/460 3PH, 7/8" Shaft 145T | M170C |
| 23e (Not shown) | Motor - 2 HP 208-230/460 3PH, 7/8" Shaft 145T | M173C |
| 23f (Not shown) | Motor - 3 HP 208-230/460 3PH, 1-1/8" Shaft 182T | M176C |
| 23g (Not shown) | Motor - 5 HP 208-230/460 3PH, 1-1/8" Shaft 182T | M178C |
| 24a (Not shown) | Motor Sheave – 4" X 5/8" Single Groove | 6198 |
| 24b (Not shown) | Motor Sheave - 4.75" X 7/8" Single Groove | S4 |
| 24c (Not shown) | Motor Sheave - 4.75" X 7/8" Double Groove | S8B |
| 24d (Not shown) | Motor Sheave - 4.75" X 1-1/8" Double Groove | S8 |
| 24e (Not shown) | Motor Sheave - 6" X 1-1/8" Double Groove | S9 |
: