FEATURES Dielectric strength 5000 Vrms Low height: 15.7 mm Epoxy sealed version available 12 Amp switching AC and DC coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Surpasses requirements of VDE 0631/0700 UL, CUR file E43203; VDE 112904 GENERAL DATA

SPDT (1 Form C) SPST (N.O.) (1 Form A) Resistive load: Max. switched power: 3000 VA Max. switched current: 12 A Max. switched voltage: 300* VDC or 400 VAC

*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.

Minimum operations A 240 VAC res. ms at nominal coil voltage ms at nominal coil voltage (with no coil suppression)

Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating 1000 megohms min. 20�C 500 VDC 50% RH Greater than 10% of nominal coil voltage - DC Greater than 15% of nominal coil voltage AC At nominal coil voltage - DC coils - AC coils 30 g P.B.T. polyester, : V0 Tinned copper alloy, (518�F) 5 seconds (176�F) 30 Seconds 14 grams

at 250 VAC resistive at 250 VAC Silver nickel or silver nickel gold plated < 100 milliohms initially

Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 200 mW (DC coil).422 VA (AC coil) 20�C (68�F) ambient (47�F) at nominal coil voltage 115�C (239�F)

1. All values (68�F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.

AZ763�1C�240AE AZ763L�1C�240AE *For 5 mm "Right" spacing substitute "AZ763R" for "AZ763L". For Form A contacts substitute "-1A" for "-1C". For gold plated contacts substitute "-1AG" for or "-1CG" for "-1C". NOTE: Form A contacts only available for DC coil versions.