FEATURES Low cost 60 Amp switching Heavy loads 4 kV dielectric Epoxy sealed construction available UL, CUR file E43203

Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 15000 VA Max. switched current: 60 A Max. switched voltage: 400 VAC Rated Load UL, CUR Material Resistance at 250 VAC, 6k cycles, General Use at 250 VAC, 10k cycles, General Use at 250 VAC, 100k cycles, General Use Silver cadmium oxide or silver tin oxide < 50 milliohms initially 1 A voltage drop method)

Life Expectancy Mechanical Electrical Set and Reset Pulse Duration Set Time (typical) Reset Time (typical) Minimum operations A 250 VAC Res. 50 ms minimum ms at nominal coil voltage ms at nominal coil voltage

Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1500 Vrms between open contacts Insulation Resistance Creepage Distance 1000 megohms min. 20�C, 500 VDC, mm At nominal coil voltage 10�55 Hz

Operating g, 11 ms, 1/2 sine (no false operation) Non-Operating g, 11 ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Tinned copper alloy P. C. (coil), heavy tabs (power) (518�F) 5 seconds 33 grams

1. All values (68�F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 4. Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force.

Nominal Coil Must Operate Max. Continuous Coil Resistance Unsealed VDC AZ2500P2�1A�24D AZ2500P2�1A�48D NOTE: Relays may be ordered with twisted copper wire terminations (Styles A-K) as shown below. Contact factory for ordering [1] max. continuous voltage should not be applied for more than 30 seconds. * For silver tin oxide contacts change to "1AE."

Notes: Weld figures for AZ2500 with twisted copper wire. Please show welding style to K) and the length of wires when ordering. Please note the length of each wire from left to right if the length is different.