Details, datasheet, quote on part number: A2SI-E-MR
| Part | A2SI-E-MR |
| Category | |
| Description | Advanced As-interface IC |
| Company | ZMD |
| Datasheet | Download A2SI-E-MR Datasheet |
| Features, Applications |
Features AS-i Complete Specification V2.11 compliant Integrated EEPROM Additional addressing channel using an optoelectronic interface Extended address mode operation as programmable option (up to 62 slaves) High impedance AS-i line input, additional pins for further impedance optimizations DC voltage output, approximately 24 volts, not stabilized 5 volt DC voltage output, stabilized, CMOS logic can be supplied directly (e.g. �C) LED status indicator output (compliant with the standard indication recommendation) Integrated watchdog Temperature range + 105�C DescriptionA�SI-E is a monolithic CMOS integrated circuit certified for AS-i (Actuator Sensor-interface) networks. AS-i networks are intended for industrial automation. The main advantage of AS-i solutions is that actuators and sensors are connected using a twowire unshielded cable that is easy to install. This cable transports both power and information/data. AS-i network communication is based on the master-slave principle. The network can be extended (to cable lengths greater than 100m) by using the A�SI-E in the repeater mode configuration. Furthermore, the A�SI-E is used as slave interface to sensors / actuators and as master interface. AS-i is a standard for the automation industry based on IEC 62026-2 and EN 50295. The device is available a 28-pin SOP (300 mils) package. ApplicationThe A�SI-E is packaged in 28-pin SOP, which exhibits a lower thermal resistance than the 28-pin SSOP package of A�SI IC. Besides applications that require higher operating ambient temperature than possible with A�SI, A�SI-E accommodates applications which require a higher power dissipation of the integrated circuit. The thermal resistance of the SOP package of the A�SI-E integrated circuit is ideal for master and/or repeater applications. Ordering Code A2SI-E-ST Description Operating Temperature Range to 105�C Package Type Device Marking A�SI-E Shipping Form Standard version of A�SI-E Standard version of A�SI-E Pre-programmed master function Pre-programmed master function Tubes (27 parts/tube) Tape-and-Reel (1000 parts/reel) Tubes (27 parts/tube) Tape-and-Reel (1000 parts/reel) ZMD Stuttgart Office For further Nord-West-Ring 34 information: 70974 Filderstadt- Bernhausen Tel.: +49 (0)711.674.517-0 Fax: +49 (0)711.674.517-99 sales@zmd.de ZMD AG Grenzstrasse 28 01109 Dresden, Germany Tel.: +49 (0)351.8822.310 Fax: +49 (0)351.8822.337 sales@zmd.de ZMD America Inc. 201 Old Country Road, Ste 204 Melville, NY 11747 Tel.: (631) 549-2666 Fax: (631) 549-2882 sensors@zmda.com |
| Related products with the same datasheet |
| A2SI-E-MT |
| A2SI-E-SR |
| A2SI-E-ST |
| Some Part number from the same manufacture ZMD |
| A2SI-E-MT Advanced As-interface IC |
| ASI4U Universal Actuator-sensor Interface IC |
| U6264BS2A07G1 Standard 5K X 8 SRAM |
| A2SI-L14-SR Low End Device As-interface IC |
| MDS768 Package Tsop32 |
| TSIC101 High Precision Temperature Sensor IC |
| MDS709 Package Plcc68 |
| MDS712 Package Pdip24 |
| A2SI-SR Release Notes IC Revision C |
| MDS757 Package Ssop20 |
| TSIC506 High Precision Temperature Sensor IC |
| ZLED7000 One Of Our ZLED Family Of LED Control ICThe ZLED7000, one of our ZLED Family of LED control ICs, is an inductive step-down converter that is optimal for driving a single LED or multiple LEDs (connected |
| ZLED7012 The ZLED7012, one of our ZLED family of LED control ICs, is a low-noise, constant-frequency charge pump DC/DC converter that can drive up to four LED channels, providing a programmable constant current |
| ZLED7022 The ZLED7022, one of our ZLED family of LED control ICs, is a low-noise, constant-frequency charge pump DC/DC converter that can drive up to six LED channels, providing a programmable constant current |
| ZIOL2211 The ZIOL2211 is a line driver/level shifter IC containing an HV1 I/O-channel having a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation |
| ZIOL2201 The ZIOL2201 is a smart power solution of a line driver/level shifter IC containing an HV1 I/O-channel having a wide range of configurable system features. It addresses the physical layer of sensor/actuator |
| ZSSC3122 The ZSSC3122 can be configured to interface with capacitive sensors from 2 to 10 pF with sensitivity as low as 125 atto-Farads (aF) per digital bit. The part accommodates single and differential input |
| ZWIR4512 The ZWIR4512 enables secure low-power wireless IPv6 communication for sensors and small devices. ZMDI provides a user-programmable, royalty-free 6LoWPAN stack with mesh routing capability with the ZWIR4512. |
| ZLED7020 The ZLED7020 continuous-mode inductive step-down converter is one of our ZLED family of LED-control ICs. It is designed for applications requiring high brightness and high current. The ZLED7020 can efficiently |
| ZIOL2411 The ZIOL2411 is a line driver/level shifter IC with two independent HV1 I/O-channels having a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory |
| ZSSC3170 ZMD AG, a global supplier of energy-efficient analog and mixed-signal solutions for automotive, industrial, and medical applications, today introduced a single-chip sensor signal conditioner IC for resistive |
|
U630H16BSK45 : 16 Kb U631H64SC35 : 64 Kb TSIC306FTB : High Precision Temperature Sensor IC TSIC306WCU : High Precision Temperature Sensor IC TSIC201FCU : High Precision Temperature Sensor IC TSIC206WST : High Precision Temperature Sensor IC MDS751 : Package Tsop32 (i/8x20) A2SI-MR : Release Notes IC Revision C U6264BS2A07G1 : Standard 5K X 8 SRAM ZSSC3154 : Automotive Sensor Signal Conditioner with Dual analog output The ZSSC3154 is an integrated circuit for highly accurate amplification and sensor-specific correction of a bridge sensor signal. Up to two temperature sensors can also be readout in parallel. The circuitry provides different configurations of the analog outputs to show two measurement results simu |
| Same catergory |
A764B/HGY : Segment Displays. CXP7500P10 : CMOS 8-bit Single Chip Microcomputer. The is a CMOS 8-bit single chip microcomputer integrating on a single chip an A/D converter, serial interface, timer/counter, time-base timer, on-screen display function, I2C bus interface, PWM output, remote control reception circuit, HSYNC counter, watchdog timer, 32kHz timer/counter besides the basic configurations of 8-bit CPU, ROM, RAM, I/O ports. SC15-11EWA : Material: GAASp/gap , Wavelength: 625nm. !1.5 INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. !HIGH LIGHT OUTPUT. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. !I.C. COMPATIBLE. ! MULTICOLOR AVAILABLE. !MECHANICALLY RUGGED. ! STANDARD : GRAY FACE, WHITE SEGMENT. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide. TA1284FN : UHF/VHF Tuner ic ( Low Phase Noise Oscillator ). BGB203 : Bluetooth System-in-a-package Radio with Baseband Controller. Bluetooth System-in-a-Package radio with baseband controller Bluetooth radio module with baseband controller . MQF13.0-2500-01 : Monolithic Crystal Filter. Application Center frequency Insertion loss Pass band 1.0 dB Ripple in pass band Stop band attenuation Alternate attenuation Spurious responses TELE FILTER Zweigniederlassung der DOVER EUROPE GMBH . ALVCH16245 : 1-to-4 Address Register/driver WITH 3-state Outputs. Member of the Texas Instruments WidebusTM Family Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD � 2000-V Human-Body Model � 200-V Machine Model � 1000-V Charged-Device Model (C101) This to 4-bit address register/driver is designed for to 3.6-V. QR/P-12P-C : QR/P Series Plug-in Crimp Connectors. TL066AC : Adjustable Low-power Jfet-input Operatoinal Amplifiers. 1N4573-1-1 : 6.4 Volt Temperature Compensated Zener Reference Diodes. 1N4565 thru DO-7 6.4 Volt Temperature Compensated Zener Reference Diodes The popular 1N4565 thru 1N4584A-1 series of Zero-TC Reference Diodes provides a selection of both 6.4 V nominal voltages and temperature coefficients to as low as 0.0005%/oC for minimal voltage change with temperature. Four different operating currents are available for selection. UM5116 : 5-7.5 Watt SMD Dc-dc Converters. Surface Mount Isolated DC-DC Converter High Efficiency 2:1 Input Range Pi Input Filter 1500 VDC Isolation Continuous Short Circuit Protection S All s are typical at nominal line, full load and 25�C unless otherwise noted. Efficiency. See Table Isolation Voltage. 1500 VDC min. 8 Isolation Resistance.10 Ohms min. Switching Frequency 400 KHz typ. 4 Operating. 3FTL68020 : SWITCH BODY, LED, RED/GREEN. Technical Data: through-hole or SMD 50mA/24VDC single pole/momentary 10.000.000 operations life time IP67 sealing temperature range: low temp: -40/+115�C high temp: -40/+160�C HOW TO ORDER 3 F Switch Mounting T through-hole S surface mount L 6 low temp. H 9 high temp. 1 D Cap 00 blue 02 green 03 grey 04 yellow 06 white 08 red 09 black ultra blue dusty. 61F-G3NH AC110/220 : DIN Rail/Channel Controller - Liquid Level Industrial Controls, Meter; LEVEL CONTROL. s: Applications: Supply and Drain Control, Full and Shortage Alarms ; Mounting Type: DIN Rail/Channel ; Voltage - Supply: 110/220 VAC ; Type: Level Control - High Sensitivity ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. MAX828EUK+T : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Switched Capacitor (Charge Pump), Doubler, Inverting 25mA -1.15 V ~ 6 V, �2.3 V ~ �12 V; IC INVERTER VOLT SOT23-5. s: Type: Switched Capacitor (Charge Pump), Doubler, Inverting ; Output Type: Adjustable ; PWM Type: - ; Synchronous Rectifier: No ; Number of Outputs: 1 ; Voltage. 4-1879213-2 : 69.8 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 69.8 OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 69.8 ; Power (Watts): 0.063W, 1/16W ; Tolerance: �0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: �25ppm/�C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. TNPW0402383RBEED : 383 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 383 OHM 1/16W 0.1% 0402. s: Resistance (Ohms): 383 ; Power (Watts): 0.063W, 1/16W ; Tolerance: �0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: �25ppm/�C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. SN5150 : 10 MHz - 300 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER. s: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 10 to 300 MHz ; Minimum Gain: 19 dB ; Input VSWR: 2.5 1 ; Output VSWR: 2.5 1 ; Package Type: SM-3, 4 PIN ; Operating Temperature: -55 to 85 C (-67 to 185 F). 602SJR00300-T : RESISTOR, CURRENT SENSE, METAL ALLOY, 0.25 W, 5 %, 100 ppm, 0.003 ohm, SURFACE MOUNT, 3912. s: Category / Application: Current Sensing, General Use ; Technology / Construction: MetalAlloy ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 3912 ; Resistance Range: 0.0030 ohms ; Tolerance: 5 +/- % ; Temperature Coefficient: 100 ±ppm/°C ; Power. |