42050-810 : Positive, Fixed, Factory Settable Voltage, Lout up to 10A

53252-117 : Two 90 Vdc, .8 a SSRS in Single 8 Pin Dip

61053-101 : (GS3020) Phototransistor in Coaxial Package, With Large Aperture

61055-005 : (GS1020) Phototransistor in Pill Pack Package, Moderate Sensitivity

62033-001 : (GS5040) Led in TO-46 Package With Dome Lens, 930nm GAAS, 2.8mW Power Out.

62033-102 : (GS5040) Led in TO-46 Package With Dome Lens, 930nm GAAS, 2.8mW Power Out.

62074-001 : Fiber Optic Led in TO-46 Package, 850nm GaAlAs,3.0mW Power Out

66079-000C : Bulkhead Mounting, Optically Coupled Digital Filter, Hermetic, Schottky Output.

66116-101B : Bulkhead Mounting Package With 4N49 Type Electrical Characteristics

66183-001 : Radiation Tolerant Optocoupler in 6 Pin Lcc, Phototransistor as Output

65025-101 : MAGNETIC FIELD SENSOR-HALL EFFECT, -10-15mT, 0.40V, RECTANGULAR, THROUGH HOLE MOUNT Specifications: Sensor Type: Magnetic ; Package / Mounting: HERMETICALLY SEALED, CERAMIC, 3 PIN ; Input Voltage: 3.5 to 20 volts ; Output Voltage: 400 millivolts ; Magnetic Field Range: -100 to 150 Oersted ; Operating Temperature: -55 to 200 C (-67 to 392 F)

65039-083 : MAGNETIC FIELD SENSOR-HALL EFFECT, 6-20mT, 1V, CYLINDRICAL Specifications: Sensor Type: Magnetic ; Input Voltage: 18 to 32 volts ; Output Voltage: 1000 millivolts ; Magnetic Field Range: 60 to 200 Oersted ; Operating Temperature: -55 to 150 C (-67 to 302 F)

AIC1084-CE : 5a Low Dropout Positive Adjustable Regulator. The is a low dropout three terminal regulator with 5A output current capability. The output voltage is adjustable with the use of a resistor divider or fixed 3.3V. Dropout voltage is guaranteed be at maximum of 1.4V with the maximum output current. Its low dropout voltage and fast transient response make it ideal for low voltage microprocessor applications.

AMS3100-12 : Micropower Voltage Reference. mV (�0.5%) max. initial tolerance (A grade) Operating Current to 20mA Low Voltage Reference 1.240 Max. 0.5 Dynamic Impedance (A grade) Low Temperature Coefficient SOT-23 Package Available Low cost APPLICATIONS Battery Powered Systems Instrumentation A/D, D/A Converters Temperature measurement Current sources Notebook/Personal Computer Monitors/ VCR/.

BP5068A : . Parameter Input voltage Output current ESD endurance Operating temperature range Storage temperature range Symbol Vi Io Vsurge Topr Tstg Limits Unit V mApk kV �C Symbol Min. Parameter Input voltage range -162 Vi Output voltage Vo -13 Output current Io 0 Line regulation Vr - Load regulation Vl - Output ripple voltage Vp - Power conversion effciency 65 Typ.

BQ24007 : Battery Chargers/Controllers. SINGLE-CELL Li-ION CHARGE MANAGEMENT IC WITH TIMER-ENABLE FOR PDAs AND INTERNET APPLIANCES D Highly Integrated Solution With FET Pass The bq2400x series ICs are advanced Li-Ion linear charge management devices for highly integrated and space-limited applications. They combine highaccuracy current and voltage regulation; FET passtransistor and reverse-blocking.

LM7800Series3 : Regulators, Linear Voltage Regulators.

MAX6412 : Low-Power, Single/dual-voltage P Reset Circuits With Capacitor-adjustable Reset Timeout Delay.

MB3802 : Power Management Switch. The is a power management switch incorporating two switch circuits with extremely low ON resistance. NO diode is required because the switch block is configured with an N-ch MOS to prevent reverse current at switch OFF. The MB3802 starts at a very low voltage (typical VIN > 2.2V) and a stable ON resistance is obtained irrespective of the switching.

MB3813A : DC/DC Converter ic (high Precision With Constant-current Function). ASSP For Power Management Applications (Secondary battery) The FUJITSU MB3813A/33A/43 are pulse width modulation (PWM) DC/DC converter ICs with independent output voltage and current setting capability. These products are covered by US Patent Number 6,147,477. The use of on-chip output setting resistance enables high precision output voltage control.

NJG1505R-C1 : SPDT Switch GAAS Mmic. n GENERAL is a GaAs SPDT switch MMIC which high isolation and low loss and ideally suitable for switching transmit/receiving signal of synthesizer. This switch is operated in the wide frequency range from 3GHz at low voltage operation from 2.5V with very small VSP8 package. n PACKAGE OUTLINE n l Single and low control voltage l High isolation l Low insertion.

UCC3750DW : Telecom Ringers Power Management. ti UCC3750, Source Ringer Controller.

MAX5943 : FireWire Current Limiter and Low-Drop ORing Switch Controller The MAX5943 is a fully integrated power-management IC for FireWire� applications. This device controls two external power n-channel MOSFETs to regulate current from the input power supply to the load and performs low-voltage-drop, power-supply ORing. The MAX5943 operates over a 7.5V to 37V input.

LM2716 : Dual (Step-up and Step-down) PWM DC/DC Converter The LM2716 is composed of two PWM DC/DC converters. A buck (step-down) converter is used to generate a fixed output voltage. A boost (step-up) converter is used to generate an adjustable output voltage. Both converters feature low RDSON (0.16 and 0.12) internal switches for maximum efficiency. Operating.

TPS62403 : The TPS6240x device series are synchronous dual step-down DC-DC converters optimized for battery powered portable applications. They provide two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The devices are also suitable to operate from a standard 3.3V or 5V voltage rail. With an input voltage range of 2.5V.

LM2735 : 520kHz/1.6MHz - Space-Efficient Boost and SEPIC DC-DC Regulator The LM2735 is an easy-to-use, space-efficient 2.1A low-side switch regulator ideal for Boost and SEPIC DC-DC regulation. It provides all the active functions to provide local DC/DC conversion with fast-transient response and accurate regulation in the smallest PCB area. Switching frequency.

AAT2868 : CABC Compatible 4 Channel Backlight Driver With Dual LDO Regulators The AAT2868 is a low-noise, constant-frequency charge pump DC/DC converter that uses a dual-mode load switch (1x) and fractional (1.5x) conversion to maximize efficiency for white LED Content Adaptive Brightness Control (CABC) applications. The AAT2868 is capable of driving 4 white.

ADM1166 : Super Sequencer With Margining Control And Non-Volatile Fault Recording The ADM1166 Super Sequencer� is a configurable supervisory/ sequencing device that offers a single-chip solution for supply monitoring and sequencing in multiple-supply systems. In addition to these functions, the ADM1166 integrates a 12-bit ADC and six 8-bit voltage output DACs.

TPS65257 : 4.5v To 16v Input, High Current, Synchronous Step Down TPS65257 is a power management IC with three step-down buck converters. Both high-side and low-side MOSFETs are integrated to provide fully synchronous conversion with higher efficiency. The converters are designed to simplify its application while giving the designer the option to optimize their.