100352 datasheet - 100352 - Low Power 8-Bit Buffer With Cut-off Drivers,

Details, datasheet, quote on part number: 100352
Part100352
CategoryLogic
TitleMilitary/Aerospace->ECL
Description100352 - Low Power 8-Bit Buffer With Cut-off Drivers, Package: Cerquad, Pin Nb=24
CompanyNational Semiconductor Corporation
DatasheetDownload 100352 Datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The 100352 contains an 8-bit buffer, individual inputs (Dn), outputs (Qn), and a data output enable pin (OEN). A Q output follows its D input when the OEN pin is LOW. A HIGH on OEN holds the outputs in a cut-off state. The cut-off state is designed to be more negative than a normal ECL LOW level. This allows the output emitter-followers to turn off when the termination supply is -2.0V, presenting a high impedance to the data bus. This high impedance reduces termination power and prevents loss of low state noise margin when several loads share the bus. The 100352 outputs are designed to drive a doubly terminated 50 transmission line (25 load impedance). All inputs have 50 k pull-down resistors.

Features

Cut-off drivers Drives 25 load Low power operation 2000V ESD protection Voltage compensated operating range to -5.7V Available to industrial grade temperature range Available to MIL-STD-883

Description Data Inputs Output Enable Input Data Outputs No Connect
H = HIGH Voltage Level L = LOW Voltage Level Cutoff = Lower-than-LOW State X = Don't Care

 

Related products with the same datasheet
100352DC
100352DMQB
100352FC
100352FMQB
100352PC
100352QI
Some Part number from the same manufacture National Semiconductor Corporation
100352D Low Power 8-bit Buffer With Cut-off Drivers
100352DC 100352 - Low Power 8-Bit Buffer With Cut-off Drivers, Package: Cerquad, Pin Nb=24
100352F Low Power 8-bit Buffer With Cut-off Drivers
100352FC 100352 - Low Power 8-Bit Buffer With Cut-off Drivers, Package: Cerquad, Pin Nb=24
100353 100353 - Low Power 8-Bit Latch, Package: Cerquad, Pin Nb=24
100353D Low Power 8-bit Register
100353DC 100353 - Low Power 8-Bit Latch, Package: Cerquad, Pin Nb=24
100353F Low Power 8-bit Register
100353FC 100353 - Low Power 8-Bit Latch, Package: Cerquad, Pin Nb=24
100355 100355 - Low Power Quad Multiplexer/Latch, Package: Cerquad, Pin Nb=24
100355D Low Power Quad Multiplexer/latch
100355FC 100355 - Low Power Quad Multiplexer/Latch, Package: Cerquad, Pin Nb=24
100355WFQMLV
100363 100363 - Low Power Dual 8-Input Multiplexer, Package: Cerquad, Pin Nb=24
100363D Low Power Dual 8-input Multiplexer
100363DM-MLS 100363 - Low Power Dual 8-Input Multiplexer, Package: Cerquad, Pin Nb=24
100363F Low Power Dual 8-input Multiplexer
100363FC 100363 - Low Power Dual 8-Input Multiplexer, Package: Cerquad, Pin Nb=24
100364 100364 - Low Power 16-Input Multiplexer, Package: Cerquad, Pin Nb=24
100364D Low Power 16-input Multiplexer
100364DC 100364 - Low Power 16-Input Multiplexer, Package: Cerquad, Pin Nb=24

CLC428A8B : Dual Wideband, Low-noise, Voltage Feedback op Amp

COPC620-XXX/WM :

DM54LS374MW8 : CMOS/BiCMOS->AC/ACT Family Octal D-type Transparent Latches And Edge-triggered Flip-flops

DP8311MDC : Octal Latched Peripheral Driver

LMX2330LMWC :

LP3875ESX-5.0 : Positive Voltage->Fixed LP3872 - 1.5A Fast Ultra Low Dropout Linear Regulator, Package: to 263, Pin Nb=5

LM2771SD : Switched capacitor DC/DC Converter The LM2771 is a switched capacitor step-down regulator that produces a 1.5V output without the use of an inductor. It is capable of supplying loads up to 250mA. The LM2771 operates with an input voltage from 2.7V to 5.5V, and requires only 3 low-cost ceramic capa

LP8501TMX : Multi-Purpose 9-Output LED Driver From The PowerWise� Family The LP8501 is a LED driver with 9 outputs, designed to produce versatile lighting effects for mobile devices. The device is equipped with an internal program memory, which allows operation without processor control. Internal program memor

VJ0805A1R8FLQAT68 : Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization

COP8SGH040Q6 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

DM74LS461J : 10-bit Counter

LMZ23605TZ/NOPB : 5A SIMPLE SWITCHER® Power Module With 36V Maximum Input Voltage The LMZ23605 SIMPLE SWITCHER© power module is an easy-to-use step-down DC-DC solution capable of driving up to 5A load. The LMZ23605 is available in an innovative package that enhances thermal performance and allows for hand or machi

Same catergory

5962-89756012A : ti SN54LS598, 8-Bit Shift Registers With Input Latches.

74FCT245 : Octal Bidirectional Transceiver. IDT54FCT245 equivalent to FASTTM speed and drive IDT54/74FCT245A 25% faster than FAST IDT74FCT245C 40% faster than FAST TTL input and output compatible CMOS output level compatible IOL = 64mA (commercial) and 48mA (military) Current levels only 5�A max. CMOS power levels (2.5mW typ. static) Direction control and overriding 3-state control MIlitary product.

74LVC2245A : 74LVC2245A; Octal Transceiver With Direction Pin; 30 Ohm Series Termination Resistors; 5 V Input/output Toleran; 3-state;; Package: SOT163 (SO20), SOT339-1 (SSOP20), SOT360-1 (TSSOP20).

74V2T132CTR : Dual 2-Input Schmitt NAND Gate. HIGH SPEED: tPD 3.7 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC 1 �A (MAX.) at TA=25�C TYPICAL HYSTERESIS 0.8V at VCC = 4.5V SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) to 5.5V IMPROVED LATCH-UP IMMUNITY The is an advanced high-speed CMOS SINGLE 2-INPUT NAND GATE.

CD74HC03E : ti CD74HC03, High Speed CMOS Logic Quad 2-Input NAND Gates With Open Drain.

CD74HCT03 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Quad 2-input NAND Gate With Open Drain.

CLC451AJ : Single Supply, Low-power, High Output, Programmable Buffer. CLC451 Single Supply, Low-Power, High Output, Programmable Buffer The is a low cost, high speed (85MHz) buffer that user-programmable gains +2, +1, and -1V/V. It has a new output stage that delivers high output drive current (100mA), but consumes minimal quiescent supply current (1.5mA) from a single 5V supply. Its current feedback architecture, fabricated.

DM7474 : Bipolar->TTL Family. Dual Positive-edge-triggered D Flip-flops With Preset, Clear And Complementary Outputs.

DM74ALS5245 : Bus Oriented Circuits. Octal 3-STATE Transceiver. This octal bus transceiver is designed for asynchronous two-way communication between data buses. The inputs include hysteresis which provides improved noise rejection. Data is transmitted either from the A bus to the B bus or from the B bus to the A bus depending on the logic level of the direction control (DIR) input. The device can be disabled via the enable.

IDT54FCT373 : Fast CMOS Octal Transparent Latches. IDT54/74FCT373/533/573 equivalent to FASTTM speed and drive to 30% faster than FAST Equivalent to FAST output drive over full temperature and voltage supply extremes IOL = 48mA (commercial) and 32mA (military) CMOS power levels (1mW typ. static) Octal transparent latch with 3-state output control JEDEC standard pinout for DIP and LCC Product available.

SN5454W : 5-wide And-or-invert Gates.

SN54ABT620 : Bus Oriented Circuits. Octal Bus Transceivers With 3-state Outputs. These octal bus transceivers provide for asynchronous communication between data buses. The control-function implementation allows for maximum flexibility in timing. The 'ABT620 devices provide inverted data at the outputs. These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic levels.

SN74AC32MDREP : ti SN74AC32-EP, Military Enhanced Plastic Quadruple 2-Input Positive-OR GATEs.

SN74HCT646DW : Registered Transceivers. ti SN74HCT646, Octal Bus Transceivers And Registers With 3-State Outputs.

A3P030-2VQ100II : FPGA, 768 CLBS, 30000 GATES, 350 MHz, PQFP100. s: System Gates: 30000 ; Logic Cells / Logic Blocks: 768 ; Package Type: Other, 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, VQFP-100 ; Logic Family: CMOS ; Pins: 100 ; Internal Frequency: 350 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Supply Voltage: 1.5V.

A3P060-1TQ144Y : FPGA, 1536 CLBS, 60000 GATES, PQFP144. s: System Gates: 60000 ; Logic Cells / Logic Blocks: 1536 ; Package Type: TQFP, Other, 20 X 20 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, TQFP-144 ; Logic Family: CMOS ; Pins: 144 ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Supply Voltage: 1.5V.

EPM240GT100A3 : IC,COMPLEX-FLASH PLD,192-CELL,4.7NS PROP DELAY,TQFP,100PIN,PLASTIC. This section provides designers with the data sheet s for MAX� II devices. The chapters contain feature definitions of the internal architecture, Joint Test Action Group (JTAG) and in-system programmability (ISP) information, DC operating conditions, AC timing parameters, and ordering information for MAX II devices. This section includes the following.

SN74ALS518NS : IDENTITY COMPARATOR. Compare Two 8-Bit Words Choice of Totem-Pole or Open-Collector Outputs SN74ALS518 and ALS520 Have 20-k Pullup Resistors on Q Inputs Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs INPUT PULLUP RESISTOR Yes OUTPUT FUNCTION AND CONFIGURATION = Q open collector.

 
0-C     D-L     M-R     S-Z