Details, datasheet, quote on part number: TCD41E2A225M
| Part | TCD41E2A225M |
| Category | |
| Description | The TCD Series are Radial lead Ceramic Capacitors from Ucc/ncc. |
| Company | ETC |
| Datasheet | Download TCD41E2A225M Datasheet |
| Quote |
| Features, Applications |
Y5U Ceramic Radial Lead High CV 125C Maximum Temperature The TCD series are radial lead ceramic capacitors from UCC/NCC. These capacitors have a very low ESR and impedance which makes these capacitors ideal for filtering switching power supplies and DC-DC converters. The TCD series has a maximum 250VDC rated voltage making them more applicable for use in higher voltage power supplies than our ceramic chip capacitors. All of our radial capacitors with 5mm lead spacing are also available with ammo pack taping. Refer to Mini-Glossary at the end of the multilayer ceramic capacitors section for additional technical information and specifications. Radial lead terminals. Capacitance range: to 100�F. Voltage range: to 250VDC. Operating temperature range: to 125C. Standard capacitance tolerance: to 80% Nominal case size (LWH): to 28.58.520.0mm. Rated lifetime: 1,000 hours at 125C. United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Dissipation Factor ( Tan ) Ripple Current Withstand Voltage Insulation Resistance Solderability 202C, 10.1kHz, and 10.2Vrms 2.5% maximum 202C, 10.1kHz, and At 125C, the maximum ripple current -1MHz is specified in the Ratings Tables. Characteristics No abnormality after applying 250% of the DC rated voltage from terminal-to-terminal and terminal-to-resin coating for to 5 seconds or 10,000M, whichever is less, after applying the DC rated voltage for 605 seconds at 202C. Using or H63A solder at a solder temperature of 2355C and a dip time of 20.5 seconds, a minimum 75% of the circumferential surface of the dipped lead wires shall be covered with new solder. Using or H63A solder at a solder temperature of 35010C and a dip time of 30.5 seconds at a depth to 2.5mm from the resin coating, the following specifications shall be satisfied when the capacitors are restored to 20C. Appearance : no abnormality Capacitance change 15% of initial measured value Tan : 2.5% The following specifications shall be satisfied when the capacitors are restored to 20C after applying the DC rated voltage for 50024,0 hours - 95% RH. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Appearance : no abnormality Capacitance change 20% of initial measured value Tan : 5% Insulation resistance or 1,000M, whichever is less The following specifications shall be satisfied when the capacitors are restored to 20C after applying 200% of the DC rated voltage for 1,00048,0 hours or 1,00048,0 hours at 1253C with the initial DC rated voltage applied. After the initial load test, the withstand voltage shall be tested by applying 250% of the DC rated voltage for 5 seconds. Appearance : no abnormality Capacitance change 20% of initial measured value Tan : 5% Insulation resistance or 1,000M, whichever is less When ordering, always specify complete catalog number for TCD Series.Taping Code: T = Straight Lead; T710 = Crimped Lead. Optional taping is available for case codes 30, 31 and 41 only. Capacitance Tolerance: to 80% Capacitance Value: Expressed in picofarads. The first two digits are significant figures, and the third digit indicates the number of zeros following these figures (e.g. = 2.2F Voltage Code: = 250VDC. Temperature Coefficient: = Y5U. Case Code: Refer to dimensions section for standard case sizes. Series Name: Indicates basic capacitor design. Standard Voltage Ratings - Radial Lead Multilayer CeramicRated Voltage (WVDC) Capacitance (�F ) Catalog Part Number UCC Case Code* Maximum Ripple Current (A rms) 125C, 10kHz-1MHz M indicates 20% tolerance. Substitute code letter Z in part number for 20%, 80% tolerance. * Refer to diagram of dimensions for actual case sizes. |
| Related products with the same datasheet |
| TCD41E2A335M |
| TCD41E2E474M |
| TCD41E2E684M |
| Some Part number from the same manufacture ETC |
| TCD41E2A335M The TCD Series are Radial lead Ceramic Capacitors from Ucc/ncc. |
| 1232072 Planetary Gearhead - P32H |
| CMFXF103FNB Chip NTC Thermistors |
| OAH15A Hcmos/ttl Oscillator |
| SEB/U6060 Mini size of Discrete Semiconductor Elements |
| M30U1555 Multilayer Ceramic Capacitors |
| AC23V8000 1MX8 BIT CMOS MASK ROM |
| HVC08 100ma Silicon Cartridge Rectifiers |
| GV13-520 Crystal Controlled Oscillators |
| OBC20 Hcmos/ttl Low Power Oscillator |
| HB11357 Breake Away Header .025(0.64mm) Square Posts |
| H11J1X Optically Coupled Bilateral Switch Non-zero Crossing Triac |
| FEDSM2000-11043 DUAL Emission Laser Induced Fluorescence Technique (delif) FOR OIL FILM Thickness AND Temperature Measurement |
| W2204 A Major Advance in RTD Technology |
| NCHA69C3 Crystal Clock Oscillator |
| AH32F1 Hc-49/u Microprocessor Crystal |
| OAH25T Hcmos/ttl Oscillator |
| 97-3057-1004 Circular 97 Series Threaded Connectors with Solder Contacts (mil-c-5015 Type) |
| BTF32F5 Hc-49/us Microprocessor Crystals |
| TC395 DUAL Interface Buffers / DUAL 2-input Nand/and/or/nor / DUAL 4-input And/nand WITH Expander |
| 485BAT3-3903 Battery Powered Converter CE |
|
GNR07S201LT : Catalog Number System MGDS-150-H-E-S : Hi-rel Dc/dc Converter M5M29GB640VP : 3.3V ONLY Flashmemory OR2T04A-7M208I : Field-programmable Gate Arrays PZC36DBCR-M : Square POST Header STYN530 : Discrete Thyristors(scrs) MOR08WG082JTA0 : Metal Oxide Film Fixed Resistors OR2T06A-5BC160I : Field-programmable Gate Arrays LM385B-2.5CSTR : 1.2 & 2.5V Micropower Voltage Reference |
| Same catergory |
2SC2581 : Audio Power Amplifier, DC to DC Converter ( NPN ). ! High Current Capability High Power Dissipation Complementary to 2SA1106 Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base voltage Collector Current (DC) Collector Dissipation Junction Temperature Storage Temperature Characterristic Collector Base Breakdown Voltage Collector Emitter Breakdown Voltage Emitter Base Breakdown. A30403RNZQ : 1-4 Pole Rotary Switches. /Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting Typical Applications Automotive Major and small appliances Industrial equipment s CONTACT RATING: Q contact material: Switch - 2.5 AMPS 125 V AC; V DC (UL/CSA). Carry - 5 AMPS continuous. See page L-6 for additional ratings. ELECTRICAL LIFE:. TVR32471KB : ZINC Oxide Varistor 50 Series. Lead Wire Style and Coating Straight Lead; Epoxy Coating Inner Kink Lead; Epoxy Coating Straight Lead; Silicone Coating Inner Kink Lead; Silicone Coating : Outward Appearance and Tape Tapping Hole Pitch: 12.7mm Tapping Hole Pitch: 15.0mm Tapping + Ammo (Box) Tapping + Reel Cutted Lead : . ESD8V0L2B-03L : Dual Channel TVS Diode. Dual Channel TVS Diode ESD / transient protection for data and power lines to IEC61000-4-2 (ESD): 15 KV (contact) IEC61000-4-4 (EFT): A (5/50 ns) Working voltage: +14 V Low capacitance Low reverse current Maximum Ratings = 25�C, unless otherwise specified Parameter Symbol VESD op T stg Symbol RthJS Value Unit ESD contact discharge1) Peak pulse current. 2SB481 : GE PNP Alloy Junction. AEQ60G24-196 : 3-5.5vdc Input, 1.2vdc - 3.3vdc Output 20W Dc-dc Converter. APA06 series power SIPs are non-isolated DCDC modules with wide input voltage range featuring high efficiency 89%@3.3Vout. APA06 series comes to 5.5V input range and are capable of providing 20W of output power in a small size 2.5in.x0.55in.x0.33in. The module uses a wide input range covering the old 3.3V input series and 5V input series, also provides. 474PLM050M : +85��c 7mm Height Low-leakage Radial Lead Aluminum Electrolytic Capacitors. MMA8453Q : MMA8453Q: 3-AXIS DIGITAL ACCELEROMETER �2g/�4g/�8g The MMA8453Q is a smart low-power, three-axis, capacitive micromachined accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings. 02013A6R8CAQ2A : 6.8pF Ceramic Capacitor 0201 (0603 Metric) 25V; CAP CER 6.8PF 25V NP0 0201. s: Capacitance: 6.8pF ; Voltage - Rated: 25V ; Tolerance: �0.25pF ; Package / Case: 0201 (0603 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55�C ~ 125�C ; Mounting Type: Surface Mount, MLCC ; Lead. RCL061212R0FKEA : 12 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 12.0 OHM .5W 1% 0612 WIDE. s: Resistance (Ohms): 12 ; Power (Watts): 0.5W, 1/2W ; Tolerance: �1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: �100ppm/�C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. ERJ-S06F80R6V : 80.6 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES ANTI-SULFUR 80.6 OHM 1% 0805. s: Resistance (Ohms): 80.6 ; Power (Watts): 0.125W, 1/8W ; Tolerance: �1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: �100ppm/�C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. D2D-56 : Accessory Switch; WAFER SW 5P-3POS SHORTING. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant. LM117HMDE : 1.2 V-37 V ADJUSTABLE POSITIVE REGULATOR, UUC. s: Regulator Type: Standard ; Output Polarity: Positive ; Output Voltage Type: Adjustable / Variable ; Package Type: Other, DIE ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.2 to 37 volts. SIOV-S05K115 : RESISTOR, VOLTAGE DEPENDENT, 150 V, 3.6 J, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Mounting / Packaging: ThroughHole, Radial Leads, RADIAL LEADED ; Power Rating: 0.1000 watts (1.34E-4 HP) ; Operating DC Voltage: 150 volts ; Operating Temperature: -40 to 85 C (-40 to 185 F). 1808970000 : 4 CONTACT(S), PUR/PVC, CIRCULAR CONNECTOR. s: Mounting Style: CableEnd ; Number of Contacts: 4. HEP-185-48A : Switching Power Supplies 187.2W 48V 3.9A IP65 W/PFC. Mean Well HEP-100/150/185 Harsh Environment Power Supply is a high-grade AC/DC power supply series with low noise and the ability to operate in extreme conditions and temperatures. Mean Well HEP-100/150/185 provides rated power of 100W, 150W, or 185W. These power supplies have an aluminum case with. |