W x D x H |
271/4" x 281/2" x 351/2"
|
Weight |
176 lb
|
Primary Power Input | 115-120 V x 60 Hz x 1 PH |
Energy Use | 4.0 Amps |
Certifications |
406P / 406CAP
Undercounter Series
Versatile High Performance Undercounter Refrigerator Units Designed for the Real World with Energy Saving R290 Refrigerant
Exterior bottom
Exterior bottom shall be heavy-gauge galvanized metal. Exterior ends shall be heavy gauge stainless steel. |
Base interior
Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. ABS interior is backed by a limited lifetime warranty. Base shall be fully insulated with high-density foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. |
406CAP
406CAP: Equipment is shipped with loose 3” diameter (3.75” ride height) casters high casters (two locking and two non-locking) unless mounting is specified on original sales order. Exterior top shall be one-piece, heavy-gauge aluminum with all edges turned down. |
Refrigeration
Refrigeration system shall use R290 refrigerant. Compressor shall be 1/5 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil shall be mounted on the interior rear wall of the cabinet. Temperature control is mounted to the exterior rear of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain 36°F to 40°F (2°C to 4°C) interior cabinet temperature. |
406P
406P: Equipment is shipped with loose 6” (15.2cm) high metal legs with black enamel finish unless mounting is specified on original sales order. Exterior top shall be one-piece, heavy-gauge stainless steel with front edge turned down to form nosing and rear edge turned down. |
Door
Door shall have a heavy-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handle shall be black, recessed ABS. Cabinet shall have 1 adjustable epoxy-coated wire shelf installed. |
Electrical Connections
Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, 16” (40.6cm) above floor, 5” from the left side. |
406P
406CAP
W x D x H |
271/4" x 273/4" x 331/4"
|
Weight |
168 lb
|
Primary Power Input | 115-120 V x 60 Hz x 1 PH |
Energy Use | 4.0 Amps |
Certifications |